Date: Fri, 24 Dec 1999 10:31:01 -0500 From: William Lloyd <wlloyd@tolstoy.mpd.ca> To: freebsd-multimedia@freebsd.org Subject: bt848 problem. Message-ID: <19991224103101.A19900@tolstoy.mpd.ca>
next in thread | raw e-mail | index | archive | help
I'm having trouble using a older bt848 card under FreeBSD 3.4 (rebuilt yesterday with latest sources etc). The card is a STB with a Temic 3x7 004 with a date of 1996. I have used the card before under FreeBSD 2.2 (and maybe even 2.1.7) and fxtv on a different workstation. When I retired the computer I put the card away and forgot about it. Recently I found a spare PCI slot and dropped it back into my main FreeBSD machine at home. Well I can't get it to find the tuner now. I'm playing with fxtv and I can't change the channel. The following dmesg is with TUNER_OVERRIDE=1. I've also fiddled with sysctl -w with Phillips and Temic no luck. a snip of my dmesg is chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 5 on pci0.6.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 5 on pci0.9.0 ed1: address 00:80:c8:f3:2f:18, type NE2000 (16 bit) rl0: <RealTek 8139 10/100BaseTX> rev 0x10 int a irq 3 on pci0.10.0 rl0: Ethernet address: 00:48:54:3e:d4:12 rl0: autoneg complete, link status good (half-duplex, 10Mbps) es2: <AudioPCI ES1370> rev 0x01 int a irq 10 on pci0.11.0 pcm2: using I/O space register mapping at 0xb000 bktr0: <BrookTree 848> rev 0x11 int a irq 11 on pci0.12.0 bti2c0: <bt848 Hard/Soft I2C controller> iicbb0: <I2C generic bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 STB TV/PCI, <no> tuner, dbx stereo. Probing for devices on PCI bus 1: vga0: <VGA-compatible display device> rev 0x11 int a irq 11 on pci1.0.0 It's a Asus P2B-S motherboard with a Riva TNT2 card. The other bit of info is I'm actually running the machine headless for the moment until I get a new monitor. I'm using a Sparc 20 as my display. fxtv output below.. I'm not expecting to watch TV over ethernet. I'm just trying to get the card working so when I get a new monitor I can watch TV. -bill galt# fxtv No matching font(s) registered with X Server: -adobe-utopia-regular-r-*-*-0-0-*-*-*-0-iso8859-1 Falling back on '10x20' font. No matching font(s) registered with X Server: -adobe-utopia-regular-r-*-*-0-0-*-*-*-0-iso8859-1 Falling back on '10x20' font. No matching font(s) registered with X Server: -adobe-utopia-regular-r-*-*-0-0-*-*-*-0-iso8859-1 Falling back on '10x20' font. No matching font(s) registered with X Server: -adobe-utopia-regular-r-*-*-0-0-*-*-*-0-iso8859-1 Falling back on '10x20' font. No matching font(s) registered with X Server: -adobe-utopia-regular-r-*-*-0-0-*-*-*-0-iso8859-1 Falling back on '10x20' font. Direct Video not supported by visual...using XImages -- William Lloyd mailto:wlloyd@mpd.ca | http://www.mpd.ca To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991224103101.A19900>