Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Nov 2012 17:36:38 +0300
From:      Nikolay Tychina <niktychina@gmail.com>
To:        Volodymyr Kostyrko <c.kworr@gmail.com>
Cc:        freebsd-wireless@freebsd.org
Subject:   Re: Wireless Ralink Adapter is detected but doesn't work
Message-ID:  <CAEXpyJu8g523iJbEKZ1QVrA8FNRQTTO6=AXJECq3=K6OW_GQCw@mail.gmail.com>
In-Reply-To: <50AF8837.7060704@gmail.com>
References:  <CAEXpyJv-=iVrfvRPZQ3_DGi5-Xbo8sgB%2BJD1yo8ZmTDF1EpT_A@mail.gmail.com> <50AF8837.7060704@gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
2012/11/23 Volodymyr Kostyrko <c.kworr@gmail.com>
>
> 23.11.2012 16:21, Nikolay Tychina:
>
>> I got TP-LINK TL-W727N adapter with a Ralink chipset, added
>>
>>      product RALINK RT5370           0x5370  RT5370 // to usbdevs
>>      RUN_DEV(RALINK,             RT5370), // to if_run.c
>> Re-built module, run0 interface then appeared in ifconfig. But if I do
>> "ifconfig wlan0 up", the command just hangs,
>> there appear lines in dmesg:
>> run0: firmware RT3071 ver. 0.236 loaded
>> run0: at uhub3, port 5, addr 4 (disconnected)
>> usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED,
>> ignored)
>> usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED,
>> ignored)
>> ugen1.4: <TPlink> at usbus1 (disconnected)
>>
>> Any way to get it working?
>
>
> This would be hard. Our source of Ralink drivers is OpenBSD. And last update there was nearly two years ago. I'd say odds are grim.
>
> --
> Sphinx of black quartz, judge my vow.

Thanks for this information, I will have to find another adapter.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAEXpyJu8g523iJbEKZ1QVrA8FNRQTTO6=AXJECq3=K6OW_GQCw>