Date: Mon, 23 Jul 2001 17:14:08 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Martin Aherron <martin@cybernetics.com> Cc: <freebsd-scsi@FreeBSD.ORG> Subject: Re: Qlogic 2200 FC card problems Message-ID: <20010723170834.X674-100000@wonky.feral.com> In-Reply-To: <01Jul23.200055edt.119041@cyborg.cybernetics.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Try one or both of: a) Enable the BIOS b) Make sure that you're downloading f/w, do one of: i) add ispfw_load="YES" to /boot/loader.conf ii) add device ispfw to your config file. It's failing to attach because there's no firmware loaded into SRAM for the command to the ROM to execute (that's the 0x2 command failing). It'd be nice if I had code in place that did the appropriate flash rom read and hand loaded firmware from the flash rom if I wasn't downloading from ispfw, but the stuff in flash rom is so unpredictable that I always say "load the firmware from the kernel". The reason this is a separate module is that it's big and won't fit on the install floppy. Also, eventually, we'll be able to reclaim memory from modules when we unload them. Next year, probably.... This should probably be a FAQ, yes. On Mon, 23 Jul 2001, Martin Aherron wrote: > I have a functional QLA 2200 FC HBA that I cannot seem to get my FreeBSD > box to > accept. I get the following information during boot (all debug except > interrupts). > On board bus scan utility detects the attached tape drive. I have tried > several different slots and interrupt vectors. Adaptec 29160 SCSI card > works perfectly. > > ... > isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0xdc00-0xdcff mem > 0xdffff000-0xdfffffff irq 10 at device 6.0 on pci0 > isp0: set PCI line size to 16 > isp0: skipping f/w download > isp0: Polled Mailbox Command (0x2) Timeout > isp0: Polled Mailbox Command (0x8) Timeout > isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT) > device_probe_and_attach: isp0 attach returned 6 > .... > > uname -a returns the following > > FreeBSD FreeBsd.cybernetics.com 4.3-STABLE FreeBSD 4.3-STABLE #3: > Mon Jul 23 19:18:52 EDT 2001 > root@FreeBsd.x.x:/usr/obj/usr/src/sys/FCDEBUG i386 > ------ > I would appreciate any suggestions about what to try next. > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010723170834.X674-100000>