From owner-freebsd-hackers Mon Jul 7 11:53:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA01113 for hackers-outgoing; Mon, 7 Jul 1997 11:53:58 -0700 (PDT) Received: from phaeton.artisoft.com (phaeton.Artisoft.COM [198.17.250.50]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id LAA01102 for ; Mon, 7 Jul 1997 11:53:51 -0700 (PDT) Received: (from terry@localhost) by phaeton.artisoft.com (8.6.11/8.6.9) id LAA18164; Mon, 7 Jul 1997 11:47:52 -0700 From: Terry Lambert Message-Id: <199707071847.LAA18164@phaeton.artisoft.com> Subject: Re: sd0 timed out while idle To: tom@sdf.com (Tom Samplonius) Date: Mon, 7 Jul 1997 11:47:52 -0700 (MST) Cc: costa@inner.cortx.com, freebsd-hackers@FreeBSD.ORG In-Reply-To: from "Tom Samplonius" at Jul 7, 97 10:39:04 am X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-hackers@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > button. Once i rebooted the SCSI bios check could not find my HD. only > > Throw the drive away, because it is going bad. Or jumper it to spin up without a reset command, so that it is on line before it is probed to see if it is online. Or set the BIOS settings for the controller to have a higher delay after the reset before the probe. Seriously, I've had a number of drives which showed up when the machine went through the cold POST, but not when the machine did a warm reset. They were all spin-up-timing issues. > Chances are the drive is spinning down, and you need a power cycle to > get it going again. Very bad. You can turn this off in mode page 3, if it is happening (if I remember my "green drives" correctly -- I don't buy them, since "green" systems take about 5 times the energy to manufacture as they are expected to use in their lifetime -- they are only useful in laptop form-factor as battery life extenders, IMO). > The ahc driver in 2.2-stable is better at kick starting stalled drives. > But even if it fixes it, it is just a matter of time before your drive > spins down for the last time. I agree that spinning down-up-down-up is a bad thing. Disable the "feature" if you can. You may also want to consider that the drive may be spinning down because it has overheated, and in reality, what you need is to fix your fan, or add a fan, or mode the machine away from the wall, etc.. Regards, Terry Lambert terry@lambert.org --- Any opinions in this posting are my own and not those of my present or previous employers.