Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 1 Sep 2001 19:44:19 +0200
From:      Wilko Bulte <wkb@freebie.xs4all.nl>
To:        Andrew Gallatin <gallatin@cs.duke.edu>
Cc:        Jim Pirzyk <Jim.Pirzyk@disney.com>, freebsd-alpha@FreeBSD.ORG
Subject:   Re: XFree86-4 and alpha DS10
Message-ID:  <20010901194419.B25898@freebie.xs4all.nl>
In-Reply-To: <15248.26093.985320.772619@grasshopper.cs.duke.edu>; from gallatin@cs.duke.edu on Sat, Sep 01, 2001 at 12:37:01AM -0400
References:  <iss.430a.3b90248d.64c9f.1@mercury.fan.fa.disney.com> <15248.26093.985320.772619@grasshopper.cs.duke.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Sep 01, 2001 at 12:37:01AM -0400, Andrew Gallatin wrote:

> "hmmm" Since this works for me, I'm assuming it must be a problem
> specific to the tsunami.  I don't suppose either of you has an X log
> from your attempt to start the X server?  Even starting it remotely
> and saving the output of your ssh session would be helpful.

Hmm, still have my serial console:

ds10#X -probeonly

XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 4.3-RELEASE alpha [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep  1 19:42:54 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "VRT17"
(**) |   |-->Device "AGP Elsa"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType/" does not exist.
        Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/m
isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:u
nscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X1
1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 16777218.0)
(--) using VT number 9

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:14:0) Matrox MGA 2164W rev 0, Mem @ 0x40000000/24,
0x018a0000/14, 0
x01000000/23, BIOS @ 0x01880000/16
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
        mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(--) Assigning device section with no busID to primary device
(--) Chipset mga2164w found
(WW) ****INVALID MEM ALLOCATION**** b: 0x40000000 e: 0x40ffffff correcting
(WW) ****INVALID MEM ALLOCATION**** b: 0x18a0000 e: 0x18a3fff correcting
(WW) ****INVALID MEM ALLOCATION**** b: 0x1000000 e: 0x17fffff correcting
(II) Loading /usr/X11R6/lib/modules/libvgahw.a

> Anyway, do you see it reporting ****INVALID MEM ALLOCATION*** in the
> log?  If so, I've seen a similar problem on my UP1000 where the X
> server was too smart and tried to remap the AGP video card into space
> reserved for something else..  Its usually bad news when the X server
> tries to change the mapping.

Yessir..

> One blind shot in the dark is to change
> xc/programs/Xserver/hw/xfree86/os-support/bsd/bsdResource.c's
> xf86PciBusAccWindowsFromOS(void) RANGE to allow everything, like

I'm gonna try this next..

-- 
|   / o / /  _   	Arnhem, The Netherlands    	email: wilko@FreeBSD.org
|/|/ / / /( (_) Bulte	

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010901194419.B25898>