Date: Fri, 31 Jan 2003 00:14:26 +1100 From: Joel Brakey <joel@perceptek.com.au> To: freebsd-questions@freebsd.org Subject: PPPoE Troubles Message-ID: <C21152AE-3454-11D7-B771-000A27B640AE@perceptek.com.au>
next in thread | raw e-mail | index | archive | help
Hello, I'm having troubles with connecting over PPPoE using an Alcatel Speed Touch Home modem - as of today. I've had this working happily under FreeBSD 4.7 for awhile now, and before that on FreeBSD 4.5. I'm guessing it may be a change on my ADSL provider's end, but they won't support BSD, and I am a little stumped as to how to fix the problem. Here's the log file entries that look to be the source of the problem (/var/log/ppp.log): Jan 30 23:31:51 synapse ppp[77]: tun0: Phase: deflink: hangup -> opening Jan 30 23:31:51 synapse ppp[77]: tun0: Phase: deflink: Enter pause (0) for redialing. Jan 30 23:31:51 synapse ppp[77]: tun0: Chat: deflink: Redial timer expired. Jan 30 23:31:51 synapse ppp[77]: tun0: Phase: deflink: Connected! Jan 30 23:31:51 synapse ppp[77]: tun0: Phase: deflink: opening -> dial Jan 30 23:31:51 synapse ppp[77]: tun0: Phase: deflink: dial -> carrier Jan 30 23:31:52 synapse ppp[77]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "vet2-exhibition") Jan 30 23:31:56 synapse ppp[77]: tun0: Phase: deflink: Disconnected! Jan 30 23:31:56 synapse ppp[77]: tun0: Phase: deflink: carrier -> hangup Jan 30 23:31:56 synapse ppp[77]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out Jan 30 23:31:56 synapse ppp[77]: tun0: Phase: deflink: 0 packets in, 0 packets out Jan 30 23:31:56 synapse ppp[77]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu Jan 30 23:31:51 2003 I'm not really sure what the Netgraph NGM_PPPOE_ACNAME line means - but am guessing PPPoE can't perform an LCP or Microsoft Configure Control Protocol configure request correctly anymore. When I try running ppp in interactive mode I don't get the first capital P in the Ppp, PPp, PPP sequence. I don't have a clue as to how to fix this though ;(. It looks like it's receiving an LCP response ok, but can't reply? Here's my ppp.conf file (which has been working fine before breaking today): default: set log Phase Chat Connect Carrier LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) # Manually set DNS servers in /etc/resolv.conf # (prevents ppp from dropping the nameserver localhost line) # enable dns # NAT via PPPOE nat dynamic yes nat log yes nat same_ports yes nat use_sockets yes nat port tcp 192.168.0.6:8080 8080 nat port tcp 192.168.0.1:80 80 # Ensure that "device" references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) set device PPPoE:rl0:datafast set speed sync set mru 1492 set mtu 1492 set ctsrts off enable lqr add default HISADDR set timeout 0 set redial 0 0 datafast: set authname myusername set authkey mypass Here's my /etc/rc.conf snippet: ifconfig_rl0="media 10baseT/UTP up" # PPPoE for DSL ppp_enable="YES" ppp_profile="datafast" ppp_mode="ddial" ppp_nat="YES" My kernel includes the following (don't know that Netgraph support needs to be compiled in anymore - but I require it anyway): # ADSL support options NETGRAPH options NETGRAPH_PPPOE options NETGRAPH_SOCKET options NETGRAPH_ETHER If anyone could give me a hand with this issue it'd be greatly appreciated. Many Thanks, Joel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C21152AE-3454-11D7-B771-000A27B640AE>