Date: Thu, 5 Jun 2003 09:10:11 -0700 (PDT) From: Ben Rosengart <ben@narcissus.net> To: freebsd-ports-bugs@FreeBSD.org Subject: Re: ports/52511: update of postfix-current port Message-ID: <200306051610.h55GABwB057121@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR ports/52511; it has been noted by GNATS.
From: Ben Rosengart <ben@narcissus.net>
To: Stefan `Sec` Zehl <sec@42.org>
Cc: Vivek Khera <vivek@khera.org>, freebsd-gnats-submit@FreeBSD.org,
Ben Rosengart <gnats@narcissus.net>
Subject: Re: ports/52511: update of postfix-current port
Date: Thu, 5 Jun 2003 12:09:15 -0400
--LQksG6bCIzRHxTLp
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Thu, Jun 05, 2003 at 05:56:24PM +0200, Stefan `Sec` Zehl wrote:
>
> The last mail in this PR speaks of an attached patchset which is missing
> (at least from the web interface).
I've regenerated it and attached it to this message.
> The latest patchest in the PR is missing a few things, namely an updated
> scripts/configure.postfix (the patchnames are different for the
> experimental releases) and the MD5sums in the distinfo file.
My patchset only addresses the basic functionality, not TLS or any of
the other optional add-ons.
> I can send a patch for these, if needed.
I would appreciate it.
> In any case, I hope this is going to be completed and committed soon :)
I don't have a commit bit, so it's pretty much out of my hands.
--
Ben Rosengart ben@narcissus.net
"Young people should be seen and not heard, because they're
good-looking but not too bright. We're pretty bright now,
but we're ugly." -- Grace Slick on the '60s youth movement
--LQksG6bCIzRHxTLp
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=postfix-patch
diff -ru /usr/ports/mail/postfix-current/Makefile postfix-current/Makefile
--- /usr/ports/mail/postfix-current/Makefile Sat Feb 22 04:54:30 2003
+++ postfix-current/Makefile Thu May 22 18:34:33 2003
@@ -7,14 +7,15 @@
# To pre-select options in batch mode, run make like this:
#
-# make -DBATCH POSTFIX_OPTIONS="DB3 PCRE"
+# make -DBATCH POSTFIX_OPTIONS="DB3 IPv6TLS"
#
# the options are the same names as in the scripts/configure.postfix file.
# POSTFIX_OPTIONS can be set in /etc/make.conf also.
+# NOTE: PCRE is enabled by default unless you specifically disable it.
+
PORTNAME= postfix
-PORTVERSION= 1.1.11-20021115
-#PORTREVISION= 1
+PORTVERSION= 2.0.10-20030521
PORTEPOCH= 1
CATEGORIES= mail ipv6
MASTER_SITES= ftp://ftp.porcupine.org/mirrors/postfix-release/experimental/ \
@@ -27,7 +28,7 @@
DISTNAME= postfix-${PORTVERSION}
DIST_SUBDIR= ${PORTNAME}
-MAINTAINER= khera@kciLink.com
+MAINTAINER= ben+postfix-current@narcissus.net
COMMENT= An alternative to widely-used Sendmail
USE_SUBMAKE= yes
@@ -41,8 +42,8 @@
relocated.5 transport.5 virtual.5
MAN8= bounce.8 cleanup.8 defer.8 error.8 flush.8 lmtp.8 local.8 \
- master.8 nqmgr.8 pickup.8 pipe.8 qmgr.8 qmqpd.8 showq.8 smtp.8 \
- smtpd.8 spawn.8 trivial-rewrite.8 virtual.8
+ master.8 nqmgr.8 pickup.8 pipe.8 proxymap.8 qmgr.8 qmqpd.8 showq.8 \
+ smtp.8 smtpd.8 spawn.8 trivial-rewrite.8 virtual.8
# TLS patch adds to MAN8 but doesn't have .html file, so avoid trying to
# patch it.
@@ -71,6 +72,15 @@
.include "${WRKDIRPREFIX}${.CURDIR}/Makefile.inc"
.endif
+.if defined(WITHOUT_PCRE)
+POSTFIX_CCARGS+= -DNO_PCRE
+.else
+LIB_DEPENDS+= pcre.0:${PORTSDIR}/devel/pcre
+POSTFIX_CCARGS+= -DHAS_PCRE -I${LOCALBASE}/include
+POSTFIX_AUXLIBS+= -L${LOCALBASE}/lib -lpcre
+.endif
+
+
post-patch:
(cd ${WRKSRC} && ${MAKE} -f Makefile.init makefiles ${MAKEFILEFLAGS} \
CCARGS="${POSTFIX_CCARGS}" AUXLIBS="${POSTFIX_AUXLIBS}" && \
@@ -107,7 +117,7 @@
.endif
do-install:
- cd ${WRKSRC}; sh postfix-install -non-interactive install_root=/ tempdir=/tmp \
+ cd ${WRKSRC}; ${SH} postfix-install -non-interactive install_root=/ tempdir=/tmp \
config_directory=${PREFIX}/etc/postfix \
daemon_directory=${PREFIX}/libexec/postfix \
command_directory=${PREFIX}/sbin \
diff -ru /usr/ports/mail/postfix-current/Makefile.inc postfix-current/Makefile.inc
--- /usr/ports/mail/postfix-current/Makefile.inc Mon Apr 7 13:29:51 2003
+++ postfix-current/Makefile.inc Fri May 23 19:42:48 2003
@@ -1,7 +1,3 @@
PREFIX= /usr/local
-LIB_DEPENDS+= pcre.0:${PORTSDIR}/devel/pcre
-POSTFIX_CCARGS+= -DHAS_PCRE -I${LOCALBASE}/include
-POSTFIX_AUXLIBS+= -L${LOCALBASE}/lib -lpcre
-PCRE_SUFFIX= +pcre
PLIST_SUB+= SUB_TLS="@comment "
PLIST_SUB+= SUB_TEST="@comment "
diff -ru /usr/ports/mail/postfix-current/distinfo postfix-current/distinfo
--- /usr/ports/mail/postfix-current/distinfo Sat Nov 23 04:22:58 2002
+++ postfix-current/distinfo Thu May 22 18:35:15 2003
@@ -1,4 +1 @@
-MD5 (postfix/postfix-1.1.11-20021115.tar.gz) = dd3c98b616844a3548049bbaa418c296
-MD5 (postfix/pfixtls-0.8.11a-1.1.11-20021031-0.9.6g.tar.gz) = 1fc29989315ab5570486929c24187626
-MD5 (postfix/postfix-pg.postfix-1.1.8.patch) = e0f4d910a6d6648d9b48e2244f2764ba
-MD5 (postfix/tls+ipv6-1.8-pf-1.1.11-20021115.patch) = f01d9a0e28fb3d1a59614f2093ad24f3
+MD5 (postfix/postfix-2.0.10-20030521.tar.gz) = 2c04b067663187b3da6c6d0040efda70
diff -ru /usr/ports/mail/postfix-current/pkg-message postfix-current/pkg-message
--- /usr/ports/mail/postfix-current/pkg-message Wed May 8 15:52:54 2002
+++ postfix-current/pkg-message Thu May 22 11:31:00 2003
@@ -10,15 +10,31 @@
This will disable Sendmail completely.
+Alternatively to the above settings, you can enable postfix to start with
+the other local services, for example, after your database server starts if
+you need it to be running for postfix. To do this, set in your rc.conf file:
-Also, you may wish to disable some Sendmail-specific daily maintenance
+sendmail_enable="NONE"
+
+Then make the following symbolic link:
+
+cd /usr/local/etc/rc.d
+ln -s /usr/local/sbin/postfix postfix.sh
+
+
+Also, you will want to disable some Sendmail-specific daily maintenance
routines in your /etc/periodic.conf file:
+daily_clean_hoststat_enable="NO"
daily_status_mail_rejects_enable="NO"
daily_status_include_submit_mailq="NO"
daily_submit_queuerun="NO"
If you are using SASL, you need to make sure that postfix has access to read
-the sasldb file. This is accomplished by adding postfix to group cyrus and
-making the /usr/local/etc/sasldb* file(s) owned by group cyrus.
+the sasldb file. This is accomplished by adding postfix to group mail and
+making the /usr/local/etc/sasldb* file(s) readable by group mail (this should
+be the default for new installs).
+
+If you are upgrading from postfix version prior to 2.0, please see the README
+files for recommended changes to your configuration.
diff -ru /usr/ports/mail/postfix-current/pkg-plist postfix-current/pkg-plist
--- /usr/ports/mail/postfix-current/pkg-plist Sat Feb 22 04:54:30 2003
+++ postfix-current/pkg-plist Thu May 22 17:30:54 2003
@@ -37,6 +37,7 @@
etc/postfix/sample-pcre-access.cf
etc/postfix/sample-pcre-body.cf
etc/postfix/sample-pcre-header.cf
+etc/postfix/sample-pgsql-aliases.cf
etc/postfix/sample-qmqpd.cf
etc/postfix/sample-rate.cf
etc/postfix/sample-regexp-access.cf
@@ -45,11 +46,13 @@
etc/postfix/sample-relocated.cf
etc/postfix/sample-resource.cf
etc/postfix/sample-rewrite.cf
+etc/postfix/sample-scheduler.cf
etc/postfix/sample-smtp.cf
etc/postfix/sample-smtpd.cf
etc/postfix/sample-transport.cf
etc/postfix/sample-virtual.cf
etc/postfix/sample-transport
+etc/postfix/sample-verify.cf
etc/postfix/sample-virtual
%%SUB_TLS%%etc/postfix/sample-tls.cf
libexec/postfix/bounce
@@ -62,6 +65,7 @@
libexec/postfix/nqmgr
libexec/postfix/pickup
libexec/postfix/pipe
+libexec/postfix/proxymap
libexec/postfix/qmgr
libexec/postfix/qmqpd
libexec/postfix/showq
@@ -69,6 +73,7 @@
libexec/postfix/smtpd
libexec/postfix/spawn
libexec/postfix/trivial-rewrite
+libexec/postfix/verify
libexec/postfix/virtual
%%SUB_TLS%%libexec/postfix/tlsmgr
sbin/postalias
@@ -87,6 +92,8 @@
bin/mailq
%%SUB_TEST%%sbin/smtp-sink
%%SUB_TEST%%sbin/smtp-source
+%%PORTDOCS%%share/doc/postfix/ADDRESS_CLASS_README
+%%PORTDOCS%%share/doc/postfix/ADDRESS_VERIFICATION_README
%%PORTDOCS%%share/doc/postfix/DB_README
%%PORTDOCS%%share/doc/postfix/DEBUG_README
%%PORTDOCS%%share/doc/postfix/ETRN_README
@@ -94,15 +101,19 @@
%%PORTDOCS%%share/doc/postfix/INSTALL
%%PORTDOCS%%share/doc/postfix/LDAP_README
%%PORTDOCS%%share/doc/postfix/LINUX_README
+%%PORTDOCS%%share/doc/postfix/LOCAL_RECIPIENT_README
%%PORTDOCS%%share/doc/postfix/LMTP_README
%%PORTDOCS%%share/doc/postfix/MACOSX_README
+%%PORTDOCS%%share/doc/postfix/MAILDROP_README
%%PORTDOCS%%share/doc/postfix/MYSQL_README
%%PORTDOCS%%share/doc/postfix/NFS_README
%%PORTDOCS%%share/doc/postfix/PACKAGE_README
%%PORTDOCS%%share/doc/postfix/PCRE_README
%%PORTDOCS%%share/doc/postfix/QMQP_README
+%%PORTDOCS%%share/doc/postfix/RELEASE_NOTES
%%PORTDOCS%%share/doc/postfix/RESTRICTION_CLASS_README
%%PORTDOCS%%share/doc/postfix/SASL_README
+%%PORTDOCS%%share/doc/postfix/SCHEDULER_README
%%PORTDOCS%%share/doc/postfix/ULTRIX_README
%%PORTDOCS%%share/doc/postfix/UUCP_README
%%PORTDOCS%%share/doc/postfix/VERP_README
@@ -148,6 +159,7 @@
%%PORTDOCS%%share/doc/postfix/postmap.1.html
%%PORTDOCS%%share/doc/postfix/postqueue.1.html
%%PORTDOCS%%share/doc/postfix/postsuper.1.html
+%%PORTDOCS%%share/doc/postfix/proxymap.8.html
%%PORTDOCS%%share/doc/postfix/qmgr.8.html
%%PORTDOCS%%share/doc/postfix/qmqpd.8.html
%%PORTDOCS%%share/doc/postfix/queuing.html
diff -ru /usr/ports/mail/postfix-current/scripts/configure.postfix postfix-current/scripts/configure.postfix
--- /usr/ports/mail/postfix-current/scripts/configure.postfix Sat Mar 1 04:25:28 2003
+++ postfix-current/scripts/configure.postfix Thu May 22 17:32:01 2003
@@ -1,5 +1,5 @@
#!/bin/sh
-# $FreeBSD: ports/mail/postfix-current/scripts/configure.postfix,v 1.43 2003/02/24 02:26:52 edwin Exp $
+# $FreeBSD: ports/mail/postfix/scripts/configure.postfix,v 1.33 2003/05/12 21:02:53 obraun Exp $
if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
exit
@@ -9,8 +9,6 @@
if [ "${POSTFIX_OPTIONS}" ]; then
set ${POSTFIX_OPTIONS}
-else
- set PCRE
fi
for i; do
@@ -21,17 +19,21 @@
/usr/bin/dialog --title "Postfix configuration options" --clear \
--checklist "\n\
Please select desired options:" -1 -1 16 \
-PCRE "Perl Compatible Regular Expressions" "$status_PCRE" \
+NOPCRE "DISABLE Perl Compatible Regular Expressions" "$status_NOPCRE" \
SASL "Cyrus SASLv1 (Simple Authentication and Security Layer)" "$status_SASL" \
SASL2 "Cyrus SASLv2 (Simple Authentication and Security Layer)" "$status_SASL2" \
+TLS "SSL and TLS" "$status_TLS" \
+IPv6 "IPv6 support" "$status_IPv6" \
+IPv6TLS "IPv6 support with SSL and TLS" "$status_IPv6TLS" \
DB3 "Berkeley DB3 (required if SASL also built with DB3)" "$status_DB3" \
+DB40 "Berkeley DB4.0 (required if SASL also built with DB4.0)" "$status_DB40" \
+DB41 "Berkeley DB4.1 (required if SASL also built with DB4.1)" "$status_DB41" \
MySQL "MySQL map lookups" "$status_MySQL" \
PgSQL "PostgreSQL map lookups" "$status_PgSQL" \
-OpenLDAP "OpenLDAP map lookups" "$status_OpenLDAP" \
+OpenLDAP12 "OpenLDAP 1.2 map lookups" "$status_OpenLDAP" \
+OpenLDAP20 "OpenLDAP 2.0 map lookups" "$status_OpenLDAP" \
+OpenLDAP21 "OpenLDAP 2.1 map lookups" "$status_OpenLDAP" \
Test "SMTP/LMTP test server and generator" "$status_Test" \
-TLS "SSL and TLS" "$status_TLS" \
-IPv6 "IPv6 support (currently broken)" "$status_IPv6" \
-IPv6TLS "IPv6 support with SSL and TLS" "$status_IPv6TLS" \
2> $tempfile
retval=$?
@@ -62,12 +64,10 @@
while [ "$1" ]; do
case $1 in
- PCRE)
- echo "LIB_DEPENDS+= pcre.0:\${PORTSDIR}/devel/pcre"
- echo "POSTFIX_CCARGS+= -DHAS_PCRE -I\${LOCALBASE}/include"
- echo "POSTFIX_AUXLIBS+= -L\${LOCALBASE}/lib -lpcre"
- echo "PCRE_SUFFIX= +pcre"
- SUB_PCRE=""
+ NOPCRE)
+ echo "WITHOUT_PCRE= yes"
+ echo "NOPCRE_SUFFIX= +nopcre"
+ SUB_NOPCRE=""
;;
SASL)
echo "LIB_DEPENDS+= sasl.8:\${PORTSDIR}/security/cyrus-sasl"
@@ -84,7 +84,7 @@
echo "POSTFIX_AUXLIBS+= \${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
fi
echo ".if exists(/usr/lib/libkrb.a)"
- echo "POSTFIX_AUXLIBS+= -lkrb -ldes -lcom_err"
+ echo "POSTFIX_AUXLIBS+= -lkrb -lcrypto -lcom_err"
echo ".endif"
SUB_SASL=""
;;
@@ -103,25 +103,56 @@
echo "POSTFIX_AUXLIBS+= \${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
fi
echo ".if exists(/usr/lib/libkrb.a)"
- echo "POSTFIX_AUXLIBS+= -lkrb -ldes -lcom_err"
+ echo "POSTFIX_AUXLIBS+= -lkrb -lcrypto -lcom_err"
echo ".endif"
SUB_SASL=""
;;
TLS)
echo "MAN8+= tlsmgr.8"
- echo "POSTFIX_CCARGS+= -DHAS_SSL -I/usr/include/openssl"
- echo "POSTFIX_AUXLIBS+= -lssl -lcrypto"
- echo "DISTFILES+= \${DISTNAME}.tar.gz pfixtls-0.8.11a-1.1.11-20021031-0.9.6g.tar.gz"
- echo "EXTRA_PATCHES+= \${WRKDIR}/pfixtls-0.8.11a-1.1.11-20021031-0.9.6g/pfixtls.diff"
+ echo "USE_OPENSSL= yes"
+ echo "POSTFIX_CCARGS+= -DHAS_SSL -I\${OPENSSLINC}"
+ echo "POSTFIX_AUXLIBS+= -L\${OPENSSLLIB} -lssl -lcrypto"
+ echo "DISTFILES+= \${DISTNAME}.tar.gz pfixtls-0.8.13-2.0.9-0.9.7b.tar.gz"
+ echo "EXTRA_PATCHES+= \${WRKDIR}/pfixtls-0.8.13-2.0.9-0.9.7b/pfixtls.diff"
echo "PATCH_STRIP= -p1"
echo "TLS_SUFFIX= +tls"
SUB_TLS=""
;;
DB3)
+ if [ X$DB40_SELECTED != "X" -o X$DB41_SELECTED != "X" ]; then
+ /usr/bin/dialog --msgbox "Select exactly one of the DB3, DB40 and DB41 options." 5 60 > /dev/stderr
+ rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
+ exit 1
+ fi
echo "LIB_DEPENDS+= db3.3:\${PORTSDIR}/databases/db3"
echo "POSTFIX_CCARGS+= -I\${LOCALBASE}/include/db3"
echo "POSTFIX_AUXLIBS+= -L\${LOCALBASE}/lib -ldb3"
- echo "DB3_SUFFIX= +db3"
+ echo "DB_SUFFIX= +db3"
+ DB3_SELECTED="YES"
+ ;;
+ DB40)
+ if [ X$DB3_SELECTED != "X" -o X$DB41_SELECTED != "X" ]; then
+ /usr/bin/dialog --msgbox "Select exactly one of the DB3, DB40 and DB41 options." 5 60 > /dev/stderr
+ rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
+ exit 1
+ fi
+ echo "LIB_DEPENDS+= db4.0:\${PORTSDIR}/databases/db4"
+ echo "POSTFIX_CCARGS+= -I\${LOCALBASE}/include/db4"
+ echo "POSTFIX_AUXLIBS+= -L\${LOCALBASE}/lib -ldb4"
+ echo "DB_SUFFIX= +db40"
+ DB40_SELECTED="YES"
+ ;;
+ DB41)
+ if [ X$DB3_SELECTED != "X" -o X$DB40_SELECTED != "X" ]; then
+ /usr/bin/dialog --msgbox "Select exactly one of the DB3, DB40 and DB41 options." 5 60 > /dev/stderr
+ rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
+ exit 1
+ fi
+ echo "LIB_DEPENDS+= db41.1:\${PORTSDIR}/databases/db41"
+ echo "POSTFIX_CCARGS+= -I\${LOCALBASE}/include/db41"
+ echo "POSTFIX_AUXLIBS+= -L\${LOCALBASE}/lib -ldb41"
+ echo "DB_SUFFIX= +db41"
+ DB41_SELECTED="YES"
;;
MySQL)
echo "BUILD_DEPENDS+= \${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
@@ -134,35 +165,42 @@
echo "LIB_DEPENDS+= pq.3:\${PORTSDIR}/\${POSTGRESQL_PORT}"
echo "POSTFIX_CCARGS+= -DHAS_PGSQL -I\${LOCALBASE}/include -I\${LOCALBASE}/pgsql/include"
echo "POSTFIX_AUXLIBS+= -L\${LOCALBASE}/lib -L\${LOCALBASE}/pgsql/lib -lpq -lcrypt"
- echo "PGSQL_SUFFIX= +pgsql"
echo "PATCH_SITES+= http://mat.cc/postfix/"
- echo "PATCHFILES+= postfix-pg.postfix-1.1.8.patch"
+ echo "PATCHFILES+= postfix-pg.postfix-2.0.0.2.patch"
echo "PATCH_DIST_STRIP= -p1"
+ echo "PGSQL_SUFFIX= +pgsql"
;;
- OpenLDAP)
+ OpenLDAP12)
echo "BUILD_DEPENDS+= \${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap12"
echo "POSTFIX_CCARGS+= -DHAS_LDAP -I\${LOCALBASE}/include"
echo "POSTFIX_AUXLIBS+= \${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
- echo "OPENLDAP_SUFFIX= +openldap"
+ echo "OPENLDAP_SUFFIX= +openldap12"
+ ;;
+ OpenLDAP20)
+ echo "BUILD_DEPENDS+= \${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap20"
+ echo "POSTFIX_CCARGS+= -DHAS_LDAP -I\${LOCALBASE}/include"
+ echo "POSTFIX_AUXLIBS+= -lldap -llber"
+ echo "OPENLDAP_SUFFIX= +openldap20"
+ ;;
+ OpenLDAP21)
+ echo "BUILD_DEPENDS+= \${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap21"
+ echo "POSTFIX_CCARGS+= -DHAS_LDAP -I\${LOCALBASE}/include"
+ echo "POSTFIX_AUXLIBS+= -lldap -llber"
+ echo "OPENLDAP_SUFFIX= +openldap21"
;;
Test)
echo "BIN1= smtp-sink smtp-source"
SUB_TEST=""
;;
IPv6)
- if [ `uname -m` != "i386" ]; then
- /usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
- rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
- exit 1
- fi
if [ X$SUB_TLS = "X" ]; then
/usr/bin/dialog --msgbox "Select exactly one of the IPv6 and TLS patches" 5 60 > /dev/stderr
rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
exit 1
fi
- echo "PATCH_SITES+= http://www.cyber-magic.org/~taka/misc/"
- echo "PATCHFILES+= postfix-1.1.11+ipv6.patch.gz"
- echo "PATCH_DIST_STRIP= -p1"
+ echo "PATCH_SITES+= ftp://ftp.stack.nl/pub/postfix/tls+ipv6/1.14/"
+ echo "PATCHFILES+= ipv6-1.14-pf-2.0.9.patch.gz"
+ echo "PATCH_DIST_STRIP= -p1"
echo "IPv6_SUFFIX= +ipv6"
echo ""
IPv6SELECTED=YES
@@ -174,12 +212,13 @@
exit 1
fi
echo "MAN8+= tlsmgr.8"
- echo "POSTFIX_CCARGS+= -DHAS_SSL -I/usr/include/openssl"
- echo "POSTFIX_AUXLIBS+= -lssl -lcrypto"
- echo "PATCH_SITES+= ftp://ftp.stack.nl/pub/postfix/tls+ipv6/1.8/"
- echo "PATCHFILES+= tls+ipv6-1.8-pf-1.1.11-20021115.patch"
+ echo "USE_OPENSSL= yes"
+ echo "POSTFIX_CCARGS+= -DHAS_SSL -I\${OPENSSLINC}"
+ echo "POSTFIX_AUXLIBS+= -L\${OPENSSLLIB} -lssl -lcrypto"
+ echo "PATCH_SITES+= ftp://ftp.stack.nl/pub/postfix/tls+ipv6/1.14/"
+ echo "PATCHFILES+= tls+ipv6-1.14-pf-2.0.9.patch.gz"
echo "PATCH_DIST_STRIP= -p1"
- echo "TLS_SUFFIX= +ipv6+tls"
+ echo "TLS_SUFFIX= +tls+ipv6"
SUB_TLS=""
;;
*)
@@ -198,4 +237,4 @@
# we ask the configure questions) doesn't pick up the extensions, but
# any subsequent build will. so "make; make install" will build twice.
# don't do this for now.
-#echo "PKGNAMESUFFIX= \${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${PGSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
+#echo "PKGNAMESUFFIX= \${NOPCRE_SUFFIX}\${SASL_SUFFIX}\${DB_SUFFIX}\${MYSQL_SUFFIX}\${PGSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
Only in postfix-current: work
--LQksG6bCIzRHxTLp--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200306051610.h55GABwB057121>