Date: Fri, 17 Apr 2009 23:22:06 +0000 (UTC) From: Marius Strobl <marius@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-releng@freebsd.org Subject: svn commit: r191231 - in releng/7.2/sys: . contrib/pf dev/ath/ath_hal dev/cxgb dev/fb Message-ID: <200904172322.n3HNM6Ym038382@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: marius Date: Fri Apr 17 23:22:06 2009 New Revision: 191231 URL: http://svn.freebsd.org/changeset/base/191231 Log: MFC: r191076 - Remove the second license as I'm also fine with the first one. - Remove redundant softc members for RIDs. - Change some softc members to be unsigned where more appropriate. - Add some missing const. - Remove support for mmap(2)'ing VGA I/O as it was broken [1] and not required by X.Org anyway. - Fix some confusion between bus, physical and virtual addresses which mostly consisted in using members of struct video_adapter inappropriately but wasn't fatal except for the regular framebuffer mmap(2)'ing. - Remove redundant bzero(9)'ing of the softc. - Don't map the framebuffer twice in case the firmware has already mapped it as besides wasting resources this isn't possible with all MMUs. This is a bit tricky as a) just because the firmware provides a property with a virtual address doesn't mean it's actually mapped (but typically is when the framebuffer is the console) and b) the firmware doesn't necessarily map it with the same byteorder as we do. This makes machfb(4) work on machines with cheetah-class MMUs (including X.Org). Reported by: Michael Plass [1] Approved by: re (kib) Modified: releng/7.2/sys/ (props changed) releng/7.2/sys/contrib/pf/ (props changed) releng/7.2/sys/dev/ath/ath_hal/ (props changed) releng/7.2/sys/dev/cxgb/ (props changed) releng/7.2/sys/dev/fb/machfb.c Modified: releng/7.2/sys/dev/fb/machfb.c ============================================================================== --- releng/7.2/sys/dev/fb/machfb.c Fri Apr 17 23:22:01 2009 (r191230) +++ releng/7.2/sys/dev/fb/machfb.c Fri Apr 17 23:22:06 2009 (r191231) @@ -1,5 +1,6 @@ /*- * Copyright (c) 2002 Bang Jun-Young + * Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -26,33 +27,6 @@ * * from: NetBSD: machfb.c,v 1.23 2005/03/07 21:45:24 martin Exp */ -/*- - * Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org> - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification, immediately at the beginning of the file. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ #include <sys/cdefs.h> __FBSDID("$FreeBSD$"); @@ -66,18 +40,23 @@ __FBSDID("$FreeBSD$"); #include <sys/systm.h> #include <sys/bus.h> #include <sys/consio.h> +#include <sys/endian.h> #include <sys/eventhandler.h> #include <sys/fbio.h> #include <sys/kernel.h> #include <sys/module.h> #include <sys/resource.h> +#include <vm/vm.h> +#include <vm/pmap.h> + #include <dev/ofw/ofw_bus.h> #include <dev/ofw/openfirm.h> #include <machine/bus.h> #include <machine/bus_private.h> #include <machine/ofw_machdep.h> +#include <machine/pmap.h> #include <machine/resource.h> #include <machine/sc_machdep.h> @@ -104,58 +83,53 @@ struct machfb_softc { uint16_t sc_chip_id; uint8_t sc_chip_rev; - int sc_memrid; - int sc_viorid; - int sc_vmemrid; struct resource *sc_memres; - struct resource *sc_viores; struct resource *sc_vmemres; bus_space_tag_t sc_memt; bus_space_tag_t sc_regt; - bus_space_tag_t sc_viot; - bus_space_tag_t sc_vmemt; bus_space_handle_t sc_memh; bus_space_handle_t sc_regh; - bus_space_handle_t sc_vioh; - bus_space_handle_t sc_vmemh; + u_long sc_mem; + u_long sc_vmem; - int sc_height; - int sc_width; - int sc_depth; - int sc_xmargin; - int sc_ymargin; + u_int sc_height; + u_int sc_width; + u_int sc_depth; + u_int sc_xmargin; + u_int sc_ymargin; size_t sc_memsize; - int sc_memtype; - int sc_mem_freq; - int sc_ramdac_freq; - int sc_ref_freq; - - int sc_ref_div; - int sc_mclk_post_div; - int sc_mclk_fb_div; + u_int sc_memtype; + u_int sc_mem_freq; + u_int sc_ramdac_freq; + u_int sc_ref_freq; + + u_int sc_ref_div; + u_int sc_mclk_post_div; + u_int sc_mclk_fb_div; const u_char *sc_font; - int sc_cbwidth; + u_int sc_cbwidth; vm_offset_t sc_curoff; int sc_bg_cache; int sc_fg_cache; - int sc_draw_cache; + u_int sc_draw_cache; #define MACHFB_DRAW_CHAR (1 << 0) #define MACHFB_DRAW_FILLRECT (1 << 1) - int sc_flags; + u_int sc_flags; #define MACHFB_CONSOLE (1 << 0) #define MACHFB_CUREN (1 << 1) #define MACHFB_DSP (1 << 2) +#define MACHFB_SWAP (1 << 3) }; static const struct { uint16_t chip_id; const char *name; uint32_t ramdac_freq; -} machfb_info[] = { +} const machfb_info[] = { { ATI_MACH64_CT, "ATI Mach64 CT", 135000 }, { ATI_RAGE_PRO_AGP, "ATI 3D Rage Pro (AGP)", 230000 }, { ATI_RAGE_PRO_AGP1X, "ATI 3D Rage Pro (AGP 1x)", 230000 }, @@ -193,7 +167,7 @@ static const struct machfb_cmap { uint8_t red; uint8_t green; uint8_t blue; -} machfb_default_cmap[16] = { +} const machfb_default_cmap[16] = { {0x00, 0x00, 0x00}, /* black */ {0x00, 0x00, 0xff}, /* blue */ {0x00, 0xff, 0x00}, /* green */ @@ -214,7 +188,7 @@ static const struct machfb_cmap { #define MACHFB_CMAP_OFF 16 -static const u_char machfb_mouse_pointer_bits[64][8] = { +static const u_char const machfb_mouse_pointer_bits[64][8] = { { 0x00, 0x00, }, /* ............ */ { 0x80, 0x00, }, /* *........... */ { 0xc0, 0x00, }, /* **.......... */ @@ -243,12 +217,12 @@ static const u_char machfb_mouse_pointer * Lookup table to perform a bit-swap of the mouse pointer bits, * map set bits to CUR_CLR0 and unset bits to transparent. */ -static const u_char machfb_mouse_pointer_lut[] = { +static const u_char const machfb_mouse_pointer_lut[] = { 0xaa, 0x2a, 0x8a, 0x0a, 0xa2, 0x22, 0x82, 0x02, 0xa8, 0x28, 0x88, 0x08, 0xa0, 0x20, 0x80, 0x00 }; -static const char *machfb_memtype_names[] = { +static const char *const machfb_memtype_names[] = { "(N/A)", "DRAM", "EDO DRAM", "EDO DRAM", "SDRAM", "SGRAM", "WRAM", "(unknown type)" }; @@ -351,8 +325,6 @@ static video_switch_t machfbvidsw = { .clear = machfb_clear, .fill_rect = machfb_fill_rect, .bitblt = machfb_bitblt, - NULL, - NULL, .diag = machfb_diag, .save_cursor_palette = machfb_save_cursor_palette, .load_cursor_palette = machfb_load_cursor_palette, @@ -698,7 +670,7 @@ machfb_set_mode(video_adapter_t *adp, in sc->sc_bg_cache = -1; sc->sc_fg_cache = -1; - sc->sc_draw_cache = -1; + sc->sc_draw_cache = 0; return (0); } @@ -869,30 +841,28 @@ machfb_mmap(video_adapter_t *adp, vm_off int prot) { struct machfb_softc *sc; + video_info_t *vi; sc = (struct machfb_softc *)adp; + vi = &adp->va_info; - if (adp->va_io_base != 0 && offset >= adp->va_io_base && - offset < adp->va_io_base + adp->va_io_size) { - *paddr = sc->sc_vioh + offset - adp->va_io_size; - return (0); - } - - if (adp->va_mem_base != 0 && offset >= adp->va_mem_base && - offset < adp->va_mem_base + adp->va_mem_size) { - *paddr = sc->sc_vmemh + offset - adp->va_mem_base; + /* BAR 2 - VGA memory */ + if (sc->sc_vmem != 0 && offset >= sc->sc_vmem && + offset < sc->sc_vmem + vi->vi_registers_size) { + *paddr = vi->vi_registers + offset - sc->sc_vmem; return (0); } - if (offset >= adp->va_registers && - offset < adp->va_registers + adp->va_registers_size) { - *paddr = sc->sc_memh + offset - adp->va_registers; + /* BAR 0 - framebuffer */ + if (offset >= sc->sc_mem && + offset < sc->sc_mem + vi->vi_buffer_size) { + *paddr = vi->vi_buffer + offset - sc->sc_mem; return (0); } /* 'regular' framebuffer mmap()ing */ if (offset < adp->va_window_size) { - *paddr = adp->va_window + offset; + *paddr = vi->vi_window + offset; return (0); } @@ -1184,10 +1154,11 @@ machfb_pci_attach(device_t dev) struct machfb_softc *sc; video_adapter_t *adp; video_switch_t *sw; + video_info_t *vi; phandle_t node; - uint32_t *p32, saved_value; + int error, i, rid; + uint32_t *p32, u32; uint8_t *p; - int error, i; node = ofw_bus_get_node(dev); if ((sc = (struct machfb_softc *)vid_get_adapter(vid_find_adapter( @@ -1196,18 +1167,19 @@ machfb_pci_attach(device_t dev) device_set_softc(dev, sc); } else { sc = device_get_softc(dev); - bzero(sc, sizeof(struct machfb_softc)); sc->sc_node = node; sc->sc_chip_id = pci_get_device(dev); sc->sc_chip_rev = pci_get_revid(dev); } adp = &sc->sc_va; + vi = &adp->va_info; /* - * Regardless whether we are the console and already allocated - * resources in machfb_configure() or not we have to allocate - * them here (again) in order for rman_get_virtual() to work. + * Allocate resources regardless of whether we are the console + * and already obtained the bus tag and handle for the framebuffer + * in machfb_configure() or not so the resources are marked as + * taken in the respective RMAN. */ /* Enable memory and IO access. */ @@ -1215,21 +1187,44 @@ machfb_pci_attach(device_t dev) pci_read_config(dev, PCIR_COMMAND, 2) | PCIM_CMD_PORTEN | PCIM_CMD_MEMEN, 2); - sc->sc_memrid = PCIR_BAR(0); + /* + * NB: we need to take care that the framebuffer isn't mapped + * in twice as besides wasting resources this isn't possible with + * all MMUs. + */ + rid = PCIR_BAR(0); if ((sc->sc_memres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, - &sc->sc_memrid, RF_ACTIVE)) == NULL) { + &rid, 0)) == NULL) { device_printf(dev, "cannot allocate memory resources\n"); return (ENXIO); } + if (OF_getprop(sc->sc_node, "address", &u32, sizeof(u32)) > 0 && + vtophys(u32) == rman_get_bushandle(sc->sc_memres)) + adp->va_mem_base = u32; + else { + bus_release_resource(dev, SYS_RES_MEMORY, + rman_get_rid(sc->sc_memres), sc->sc_memres); + rid = PCIR_BAR(0); + if ((sc->sc_memres = bus_alloc_resource_any(dev, + SYS_RES_MEMORY, &rid, RF_ACTIVE)) == NULL) { + device_printf(dev, + "cannot allocate memory resources\n"); + return (ENXIO); + } + adp->va_mem_base = + (vm_offset_t)rman_get_virtual(sc->sc_memres); + } sc->sc_memt = rman_get_bustag(sc->sc_memres); sc->sc_memh = rman_get_bushandle(sc->sc_memres); - adp->va_registers = rman_get_start(sc->sc_memres); - adp->va_registers_size = rman_get_size(sc->sc_memres); sc->sc_regt = sc->sc_memt; bus_space_subregion(sc->sc_regt, sc->sc_memh, MACH64_REG_OFF, MACH64_REG_SIZE, &sc->sc_regh); - adp->va_buffer = (vm_offset_t)rman_get_virtual(sc->sc_memres); - adp->va_buffer_size = rman_get_size(sc->sc_memres); + adp->va_mem_size = rman_get_size(sc->sc_memres); + adp->va_buffer = adp->va_mem_base; + adp->va_buffer_size = adp->va_mem_size; + sc->sc_mem = rman_get_start(sc->sc_memres); + vi->vi_buffer = sc->sc_memh; + vi->vi_buffer_size = adp->va_buffer_size; /* * Depending on the firmware version the VGA I/O and/or memory @@ -1239,46 +1234,27 @@ machfb_pci_attach(device_t dev) * mean that we get valid ones. Invalid resources seem to have * in common that they start at address 0. We don't allocate * them in this case in order to avoid warnings in apb(4) and - * crashes when using these invalid resources. Xorg is aware + * crashes when using these invalid resources. X.Org is aware * of this and doesn't use the VGA resources in this case (but * demands them if they are valid). */ - sc->sc_viorid = PCIR_BAR(1); - if (bus_get_resource_start(dev, SYS_RES_IOPORT, sc->sc_viorid) != 0) { - if ((sc->sc_viores = bus_alloc_resource_any(dev, - SYS_RES_IOPORT, &sc->sc_viorid, RF_ACTIVE)) == NULL) { - device_printf(dev, - "cannot allocate VGA I/O resources\n"); - error = ENXIO; - goto fail_memres; - } - sc->sc_viot = rman_get_bustag(sc->sc_viores); - sc->sc_vioh = rman_get_bushandle(sc->sc_viores); - adp->va_io_base = rman_get_start(sc->sc_viores); - adp->va_io_size = rman_get_size(sc->sc_viores); - } - - sc->sc_vmemrid = PCIR_BAR(2); - if (bus_get_resource_start(dev, SYS_RES_MEMORY, sc->sc_vmemrid) != 0) { + rid = PCIR_BAR(2); + if (bus_get_resource_start(dev, SYS_RES_MEMORY, rid) != 0) { if ((sc->sc_vmemres = bus_alloc_resource_any(dev, - SYS_RES_MEMORY, &sc->sc_vmemrid, RF_ACTIVE)) == NULL) { + SYS_RES_MEMORY, &rid, RF_ACTIVE)) == NULL) { device_printf(dev, "cannot allocate VGA memory resources\n"); error = ENXIO; - goto fail_viores; + goto fail_memres; } - sc->sc_vmemt = rman_get_bustag(sc->sc_vmemres); - sc->sc_vmemh = rman_get_bushandle(sc->sc_vmemres); - adp->va_mem_base = rman_get_start(sc->sc_vmemres); - adp->va_mem_size = rman_get_size(sc->sc_vmemres); + adp->va_registers = + (vm_offset_t)rman_get_virtual(sc->sc_vmemres); + adp->va_registers_size = rman_get_size(sc->sc_vmemres); + sc->sc_vmem = rman_get_start(sc->sc_vmemres); + vi->vi_registers = rman_get_bushandle(sc->sc_vmemres); + vi->vi_registers_size = adp->va_registers_size; } - device_printf(dev, - "%d MB aperture at 0x%08x, %d KB registers at 0x%08x\n", - (u_int)(adp->va_buffer_size / (1024 * 1024)), - (u_int)adp->va_buffer, MACH64_REG_SIZE / 1024, - (u_int)sc->sc_regh); - if (!(sc->sc_flags & MACHFB_CONSOLE)) { if ((sw = vid_get_switch(MACHFB_DRIVER_NAME)) == NULL) { device_printf(dev, "cannot get video switch\n"); @@ -1303,33 +1279,46 @@ machfb_pci_attach(device_t dev) } } - device_printf(dev, - "%ld KB %s %d.%d MHz, maximum RAMDAC clock %d MHz, %sDSP\n", - (u_long)sc->sc_memsize, machfb_memtype_names[sc->sc_memtype], - sc->sc_mem_freq / 1000, sc->sc_mem_freq % 1000, - sc->sc_ramdac_freq / 1000, - (sc->sc_flags & MACHFB_DSP) ? "" : "no "); - device_printf(dev, "resolution %dx%d at %d bpp\n", - sc->sc_width, sc->sc_height, sc->sc_depth); - /* * Test whether the aperture is byte swapped or not, set - * va_window and va_window_size as appropriate. + * va_window and va_window_size as appropriate. Note that + * the aperture could be mapped either big or little endian + * on independently of the endianess of the host so this + * has to be a runtime test. */ p32 = (uint32_t *)adp->va_buffer; - saved_value = *p32; + u32 = *p32; p = (uint8_t *)adp->va_buffer; *p32 = 0x12345678; if (!(p[0] == 0x12 && p[1] == 0x34 && p[2] == 0x56 && p[3] == 0x78)) { adp->va_window = adp->va_buffer + 0x800000; adp->va_window_size = adp->va_buffer_size - 0x800000; + vi->vi_window = vi->vi_buffer + 0x800000; + vi->vi_window_size = vi->vi_buffer_size - 0x800000; + sc->sc_flags |= MACHFB_SWAP; } else { adp->va_window = adp->va_buffer; adp->va_window_size = adp->va_buffer_size; + vi->vi_window = vi->vi_buffer; + vi->vi_window_size = vi->vi_buffer_size; } - *p32 = saved_value; + *p32 = u32; adp->va_window_gran = adp->va_window_size; + device_printf(dev, + "%d MB aperture at %p %sswapped\n", + (u_int)(adp->va_window_size / (1024 * 1024)), + (void *)adp->va_window, (sc->sc_flags & MACHFB_SWAP) ? + "" : "not "); + device_printf(dev, + "%ld KB %s %d.%d MHz, maximum RAMDAC clock %d MHz, %sDSP\n", + (u_long)sc->sc_memsize, machfb_memtype_names[sc->sc_memtype], + sc->sc_mem_freq / 1000, sc->sc_mem_freq % 1000, + sc->sc_ramdac_freq / 1000, + (sc->sc_flags & MACHFB_DSP) ? "" : "no "); + device_printf(dev, "resolution %dx%d at %d bpp\n", + sc->sc_width, sc->sc_height, sc->sc_depth); + /* * Allocate one page for the mouse pointer image at the end of * the little endian aperture, right before the memory mapped @@ -1359,14 +1348,11 @@ machfb_pci_attach(device_t dev) fail_vmemres: if (sc->sc_vmemres != NULL) - bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_vmemrid, - sc->sc_vmemres); - fail_viores: - if (sc->sc_viores != NULL) - bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_viorid, - sc->sc_viores); + bus_release_resource(dev, SYS_RES_MEMORY, + rman_get_rid(sc->sc_vmemres), sc->sc_vmemres); fail_memres: - bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid, sc->sc_memres); + bus_release_resource(dev, SYS_RES_MEMORY, + rman_get_rid(sc->sc_memres), sc->sc_memres); return (error); } @@ -1396,7 +1382,7 @@ machfb_cursor_enable(struct machfb_softc static int machfb_cursor_install(struct machfb_softc *sc) { - uint16_t *p; + uint16_t *p, v; uint8_t fg; int i, j; @@ -1410,12 +1396,18 @@ machfb_cursor_install(struct machfb_soft machfb_default_cmap[fg].green << 16 | machfb_default_cmap[fg].blue << 8); p = (uint16_t *)(sc->sc_va.va_buffer + sc->sc_curoff); - for (i = 0; i < 64; i++) - for (j = 0; j < 8; j++) - *(p++) = machfb_mouse_pointer_lut[ - machfb_mouse_pointer_bits[i][j] >> 4] | + for (i = 0; i < 64; i++) { + for (j = 0; j < 8; j++) { + v = machfb_mouse_pointer_lut[ + machfb_mouse_pointer_bits[i][j] >> 4] << 8 | machfb_mouse_pointer_lut[ - machfb_mouse_pointer_bits[i][j] & 0x0f] << 8; + machfb_mouse_pointer_bits[i][j] & 0x0f]; + if (sc->sc_flags & MACHFB_SWAP) + *(p++) = bswap16(v); + else + *(p++) = v; + } + } return (0); } @@ -1424,7 +1416,7 @@ static int machfb_get_memsize(struct machfb_softc *sc) { int tmp, memsize; - int mem_tab[] = { + const int const mem_tab[] = { 512, 1024, 2048, 4096, 6144, 8192, 12288, 16384 };
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904172322.n3HNM6Ym038382>