FreeBSD 10.0-RELEASE Errata

The FreeBSD Project

FreeBSD 10.1-RELEASE Errata

The FreeBSD Project

FreeBSD is a registered trademark of the FreeBSD Foundation.

Intel, Celeron, EtherExpress, i386, i486, Itanium, Pentium, and Xeon are trademarks or registered @@ -13,7 +13,7 @@ as trademarks. Where those designations appear in this document, and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the “™” or the - “®” symbol.

Last modified on 2014-09-16 by gjb.

Abstract

This document lists errata items for FreeBSD 10.0-RELEASE, + “®” symbol.

Last modified on 2014-10-14 by gjb.

Abstract

This document lists errata items for FreeBSD 10.1-RELEASE, containing significant information discovered after the release or too late in the release cycle to be otherwise included in the release documentation. This information @@ -21,9 +21,9 @@ software or documentation that could affect its operation or usability. An up-to-date version of this document should always be consulted before installing this version of - FreeBSD.

This errata document for FreeBSD 10.0-RELEASE will be - maintained until the release of FreeBSD 10.1-RELEASE.

Table of Contents

1. Introduction
2. Security Advisories
3. Open Issues
4. Late-Breaking News

1. Introduction

This errata document contains “late-breaking - news” about FreeBSD 10.0-RELEASE Before installing this + FreeBSD.

This errata document for FreeBSD 10.1-RELEASE will be + maintained until the release of FreeBSD 10.2-RELEASE.

Table of Contents

1. Introduction
2. Security Advisories
3. Open Issues
4. Late-Breaking News

1. Introduction

This errata document contains “late-breaking + news” about FreeBSD 10.1-RELEASE before installing this version, it is important to consult this document to learn about any post-release discoveries or problems that may already have been found and fixed.

Any version of this errata document actually distributed @@ -32,19 +32,9 @@ the Internet and should be consulted as the “current errata” for this release. These other copies of the errata are located at http://www.FreeBSD.org/releases/, plus any - sites which keep up-to-date mirrors of this location.

Source and binary snapshots of FreeBSD 10.0-STABLE also + sites which keep up-to-date mirrors of this location.

Source and binary snapshots of FreeBSD 10.1-STABLE also contain up-to-date copies of this document (as of the time of - the snapshot).

For a list of all FreeBSD CERT security advisories, see http://www.FreeBSD.org/security/ or ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/.

2. Security Advisories

Advisory	Date	Topic
SA-13:14.openssh	19 November 2013	OpenSSH AES-GCM memory corruption - vulnerability
SA-14:01.bsnmpd	14 January 2014	bsnmpd remote denial of service vulnerability
SA-14:02.ntpd	14 January 2014	ntpd distributed reflection Denial of Service vulnerability
SA-14:03.openssl	14 January 2014	OpenSSL multiple vulnerabilities
SA-14:04.bind< /a>	14 January 2014	BIND remote denial of service vulnerability
SA-14:05.nfsserver	8 April 2014	Deadlock in the NFS server
SA-14:06.openssl	8 April 2014	OpenSSL multiple vulnerabilities
SA-14:07.devfs	30 April 2014	Fix devfs rules not applied by default for - jails
SA-14:08.tcp	30 April 2014	Fix TCP reassembly - vulnerability
SA-14:09.openssl	30 April 2014	Fix OpenSSL use-after-free - vulnerability
SA-14:10.openssl	15 May 2014	Fix OpenSSL NULL pointer deference - vulnerability
SA-14:11.sendmail	3 June 2014	Fix sendmail improper close-on-exec flag - handling
SA-14:13.pam	3 June 2014	Fix incorrect error handling in PAM policy - parser
SA-14:14.openssl	5 June 2014	Multiple vulnerabilities
SA-14:15.iconv	24 June 2014	NULL pointer dereference and out-of-bounds - array access
SA-14:16.file	24 June 2014	Multiple vulnerabilities
SA-14:17.kmem	8 July 2014	Kernel memory disclosure in control messages - and SCTP notifications
SA-14:18.openssl	9 September 2014	Multiple vulnerabilities
SA-14:19.tcp	16 September 2014	Denial of Service in TCP packet - processing.

3. Open Issues

FreeBSD/i386 10.0-RELEASE running as a guest + the snapshot).
For a list of all FreeBSD CERT security advisories, see http://www.FreeBSD.org/security/ or ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/.

2. Security Advisories

Advisory	Date	Topic
No advisories.

3. Open Issues

FreeBSD/i386 10.1-RELEASE running as a guest operating system on VirtualBox can have a problem with disk I/O access. It depends on some specific hardware configuration and does not depend on a @@ -59,56 +49,10 @@ boot
/boot/loader.conf after a boot. It disables unmapped I/O at every boot:
```
vfs.unmapped_buf_allowed=0
```
[2014-04-03 update] It has been reported that instability may be present on virtual machines running - on other hypervisors, such as Xen or KVM.
A bug in Heimdal (an - implementation of Kerberos - authentication in FreeBSD base system) has been fixed. It - could cause an interoperability issue between - Heimdal and the other - implementations including MIT - Kerberos. However, due to this fix, - Heimdal and some applications - which depend on it in the previous FreeBSD releases do not work - with one in 10.0-RELEASE in certain cases. Errata Notice - for the supported releases to fix it will be - released.
A bug in killall(1) has been discovered. It - makes killall -INT to deliver - SIGTERM rather than the desired - SIGINT, and may cause blocking - behavior for scripts that uses it, as -I - means “interactive”. A workaround of this - would be to use -SIGINT instead. - This bug has been fixed on FreeBSD-CURRENT and will be fixed - in FreeBSD 10.0-STABLE.
The bxe(4) driver can cause packet corruption when - TSO (TCP Segmentation Offload) feature is enabled. This - feature is enabled by default and can be disabled by using a - -tso parameter of ifconfig(8). It can - be specified in rc.conf(5) like the following:
```
ifconfig_bxe0="DHCP -tso"
```
This bug has been fixed on FreeBSD - 10.0-STABLE.
Due to a minor incompatibility with pkg(7) version - 1.2.x, bsdconfig(8) will duplicate - the list of available packages for installation. This is - due to the PACKAGESITE environment - variable being set for backwards compatibility with older - versions of pkg(7). This affects generation of the - available package list only, and does not affect the - behavior when processing packages for installation.
A regression in pw(8) does not remove a user from - groups not specified in the provided group list when the - -G flag is used. This is expected to be - corrected in FreeBSD-CURRENT and FreeBSD 10.0-STABLE.
ipfw(8) fwd action can send - packets to the correct interface with a wrong link-layer - address when the route is updated. This bug has been fixed - on FreeBSD-CURRENT and will be fixed in FreeBSD - 10.0-STABLE.
The mount_udf(8) utility has a bug which prevents - it from mounting any UDF file system. This has been fixed - in FreeBSD-CURRENT and FreeBSD 10.0-STABLE.
Updating LSI firmware on mps(4) controllers with - the sas2flash utility may cause - the system to hang, or may cause the system to panic. This - is fixed in the stable/10 branch with - revisions r262553 and - r262575, and will be included in - FreeBSD 10.1-RELEASE.

4. Late-Breaking News

No news.

This file, and other release-related documents, - can be downloaded from http://www.FreeBSD.org/snapshots/.

For questions about FreeBSD, read the + on other hypervisors, such as Xen or KVM.

FreeBSD 10.0-STABLE Hardware Notes

The FreeBSD Documentation Project

FreeBSD 10.1-RELEASE Hardware Notes

The FreeBSD Documentation Project

FreeBSD is a registered trademark of the FreeBSD Foundation.

AMD, AMD Athlon, AMD Opteron, Athlon, Élan, Opteron, and PCnet are @@ -27,7 +27,7 @@ and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the “™” or the “®” symbol.

Last modified on 2014-08-26 by gjb.

Table of Contents

1. Introduction
2. Supported Processors and System Boards
3. Supported Devices

1. Introduction

This document contains the hardware compatibility notes for - FreeBSD 10.0-STABLE. It lists the hardware platforms + FreeBSD 10.1-RELEASE. It lists the hardware platforms supported by FreeBSD, as well as the various types of hardware devices (storage controllers, network interfaces, and so on), along with known working instances of these devices.

2. Supported Processors and System Boards

This section provides some architecture-specific information @@ -157,7 +157,7 @@ as well as the ATI Mach64 chips found onboard in for example Sun Blade™ 100, Sun Blade™ 150, Sun Ultra™ 5 and Sun Ultra™ 10) driver must use the serial console.

If you have a system that is not listed here, it may not - have been tested with FreeBSD 10.0-STABLE. We encourage + have been tested with FreeBSD 10.1-RELEASE. We encourage you to try it and send a note to the FreeBSD SPARC porting mailing list with your results, including which devices work and which do not.

The following systems are fully supported by FreeBSD:

Naturetech GENIALstation 777S
Sun Blade™ 100
Sun Blade™ 150
Sun Enterprise™ 150
Sun Enterprise™ 220R
Sun Enterprise™ 250
Sun Enterprise™ 420R
Sun Enterprise™ 450
Sun Fire™ B100s (support for the on-board NICs first appeared in 8.1-RELEASE)
Sun Fire™ V100
Sun Fire™ V120
Sun Netra™ t1 100/105
Sun Netra™ T1 AC200/DC200
Sun Netra™ t 1100
Sun Netra™ t 1120
Sun Netra™ t 1125
Sun Netra™ t 1400/1405
Sun Netra™ 120
Sun Netra™ X1
Sun SPARCEngine® Ultra AX1105
Su! n SPARCEngine® Ultra AXe
Sun SPARCEngine® Ultra AXi
Sun SPARCEngine® Ultra AXmp
Sun SPARCEngine® CP1500
Sun Ultra™ 1
Sun Ultra™ 1E
Sun Ultra™ 2
Sun Ultra™ 5
Sun Ultra™ 10
Sun Ultra™ 30
Sun Ultra™ 60
Sun Ultra™ 80
Sun Ultra™ 450

The following systems are partially supported by FreeBSD. In @@ -337,9 +337,9 @@ cards compatible with the HOT1 from Virtual Computers (xrpu driver).

[pc98] Power Management Controller of NEC PC-98 Note (pmc driver)

This file, and other release-related documents, - can be downloaded from http://www.FreeBSD.org/snapshots/.

For questions about FreeBSD, read the + can be downloaded from http://www.FreeBSD.org/releases/.

For questions about FreeBSD, read the documentation before - contacting <questions@FreeBSD.org>.

All users of FreeBSD 10.0-STABLE should + contacting <questions@FreeBSD.org>.

All users of FreeBSD 10.1-STABLE should subscribe to the <stable@FreeBSD.org> mailing list.

For questions about this documentation, e-mail <doc@FreeBSD.org>.

\ No newline at end of file Modified: head/en_US.ISO8859-1/htdocs/releases/10.1R/readme.html ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/10.1R/readme.html Tue Oct 14 10:06:25 2014 (r45822) +++ head/en_US.ISO8859-1/htdocs/releases/10.1R/readme.html Tue Oct 14 12:43:56 2014 (r45823) @@ -1,5 +1,5 @@ -FreeBSD 10.0-STABLE README

FreeBSD 10.0-STABLE README

The FreeBSD Project

FreeBSD 10.1-RELEASE README

The FreeBSD Project

FreeBSD is a registered trademark of the FreeBSD Foundation.

Intel, Celeron, EtherExpress, i386, i486, Itanium, Pentium, and Xeon are trademarks or registered @@ -17,12 +17,12 @@ and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the “™” or the “®” symbol.

Last modified on 2014-08-26 by gjb.

Abstract

This document gives a brief introduction to FreeBSD - 10.0-STABLE. It includes some information on how to + 10.1-RELEASE. It includes some information on how to obtain FreeBSD, a listing of various ways to contact the FreeBSD Project, and pointers to some other sources of - information.

Table of Contents

1. Introduction
2. Obtaining FreeBSD
3. Contacting the FreeBSD Project
4. Further Reading
5. Acknowledgments

1. Introduction

This distribution is a snapshot of FreeBSD - 10.0-STABLE, the latest point along the 10.0-STABLE - branch.

1.1. About FreeBSD

FreeBSD is an operating system based on 4.4 BSD Lite for + information.

Table of Contents

1. Introduction
2. Obtaining FreeBSD
3. Contacting the FreeBSD Project
4. Further Reading
5. Acknowledgments

1. Introduction

This distribution is a release of FreeBSD + 10.1-RELEASE, the latest point along the 10.1-STABLE + branch.

1.1. About FreeBSD

FreeBSD is an operating system based on 4.4 BSD Lite for AMD64 and Intel EM64T based PC hardware (amd64), Intel, AMD, Cyrix or NexGen “x86” based PC hardware (i386), Intel Itanium Processor based computers @@ -50,23 +50,13 @@ operating environment that extends far beyond what's provided by many commercial versions of UNIX®. Most ports are also available as pre-compiled “packages”, which can - be quickly installed from the installation program.

1.2. Target Audience

This snapshot is aimed - primarily at early adopters and various other users who want - to get involved with the ongoing development of FreeBSD. While - the FreeBSD development team tries its best to ensure that each - snapshot works as advertised, 10.0-STABLE is very - much a work-in-progress.

The basic requirements for using - this snapshot are technical proficiency with FreeBSD and an - understanding of the ongoing development process of FreeBSD - 10.0-STABLE (as discussed on the FreeBSD-STABLE mailing list).

For those more interested in doing - business with FreeBSD than in experimenting with new FreeBSD - technology, formal releases (such as 10.0-RELEASE) - are frequently more appropriate. Releases undergo a period of - testing and quality assurance checking to ensure high + be quickly installed from the installation program.

1.2. Target Audience

This release of FreeBSD is + suitable for all users. It has undergone a period of testing + and quality assurance checking to ensure the highest reliability and dependability.

2. Obtaining FreeBSD

FreeBSD may be obtained in a variety of ways. This section focuses on those ways that are primarily useful for obtaining a complete FreeBSD distribution, rather than updating an existing - installation.

2.1. CDROM and DVD

FreeBSD -RELEASE distributions may be ordered on CDROM or DVD + installation.

2.1. CDROM and DVD

FreeBSD -RELEASE distributions may be ordered on CDROM or DVD from several publishers. This is frequently the most convenient way to obtain FreeBSD for new installations, as it provides a convenient way to quickly reinstall the system if @@ -74,7 +64,7 @@ precompiled “packages” from the FreeBSD Ports Collection, or other extra material.

A list of the CDROM and DVD publishers known to the project are listed in the “Obtaining - FreeBSD” appendix to the Handbook.

2.2. FTP

You can use FTP to retrieve FreeBSD and any or all of its + FreeBSD” appendix to the Handbook.

2.2. FTP

You can use FTP to retrieve FreeBSD and any or all of its optional packages from ftp://ftp.FreeBSD.org/, which is the official FreeBSD release site, or any of its “mirrors”.

Lists of locations that mirror FreeBSD can be found in the @@ -90,8 +80,8 @@ floppy disk images (for applicable platforms), as well as the files necessary to do an installation over the network. Finally mirrors sites usually contain a set of packages for - the most current release.

3. Contacting the FreeBSD Project

3.1. Email and Mailing Lists

For any questions or general technical support issues, - please send mail to the FreeBSD general questions mailing list.

If tracking the 10.0-STABLE development efforts, you + the most current release.

3. Contacting the FreeBSD Project

3.1. Email and Mailing Lists

For any questions or general technical support issues, + please send mail to the FreeBSD general questions mailing list.

If tracking the 10.1-STABLE development efforts, you must join the FreeBSD-STABLE mailing list, in order to keep abreast of recent developments and changes that may affect the way you use and maintain the system.

Being a largely-volunteer effort, the FreeBSD Project is @@ -112,7 +102,7 @@ from the Mailman pages or the mailing lists section of the FreeBSD Web site.

Important:

Do not send email to the lists asking to be subscribed. Use the Mailman interface - instead.

3.2. Submitting Problem Reports

Suggestions, bug reports and contributions of code are + instead.

3.2. Submitting Problem Reports

Suggestions, bug reports and contributions of code are always valued—please do not hesitate to report any problems you may find. Bug reports with attached fixes are of course even more welcome.

The preferred method to submit bug reports from a machine @@ -130,7 +120,7 @@ submitting effective problem reports.

4. Further Reading

There are many sources of information about FreeBSD; some are included with this distribution, while others are available on-line or in print versions.

4.1. Release Documentation

A number of other files provide more specific information - about this snapshot distribution. These files are + about this release distribution. These files are provided in various formats. Most distributions will include both ASCII text (.TXT) and HTML (.HTM) renditions. Some distributions @@ -140,7 +130,7 @@ some cursory notes about obtaining a distribution.

RELNOTES.TXT: The release notes, showing what's new and different in FreeBSD - 10.0-STABLE compared to the previous release (FreeBSD + 10.1-RELEASE compared to the previous release (FreeBSD 10.0-RELEASE).

HARDWARE.TXT: The hardware compatibility list, showing devices with which FreeBSD has been tested and is known to work.

ERRATA.TXT: Release errata. @@ -165,7 +155,7 @@ release. These other copies of the errata are located at ../../../../releases/ (as well as any sites which keep up-to-date mirrors of this - location).

4.2. Manual Pages

As with almost all UNIX® like operating systems, FreeBSD + location).

4.2. Manual Pages

As with almost all UNIX® like operating systems, FreeBSD comes with a set of on-line manual pages, accessed through the man(1) command or through the hypertext manual pages gateway on the FreeBSD Web site. In @@ -174,7 +164,7 @@ information on particular topics. Notable examples of such manual pages are tuning(7) (a guide to performance tuning), security(7) (an introduction to FreeBSD security), - and style(9) (a style guide to kernel coding).

4.3. Books and Articles

Two highly-useful collections of FreeBSD-related information, + and style(9) (a style guide to kernel coding).

4.3. Books and Articles

Two highly-useful collections of FreeBSD-related information, maintained by the FreeBSD Project, are the FreeBSD Handbook and FreeBSD FAQ (Frequently Asked Questions document). On-line versions of the Handbook and FAQ are always @@ -197,16 +187,16 @@ systems are applicable as well, some of which are also listed in the bibliography.

5. Acknowledgments

FreeBSD represents the cumulative work of many hundreds, if not thousands, of individuals from around the world who have worked - countless hours to bring about this snapshot. For + countless hours to bring about this release. For a complete list of FreeBSD developers and contributors, please see “Contributors to FreeBSD” on the FreeBSD Web site or any of its mirrors.

Special thanks also go to the many thousands of FreeBSD users - and testers all over the world, without whom this snapshot + and testers all over the world, without whom this release simply would not have been possible.

This file, and other release-related documents, - can be downloaded from http://www.FreeBSD.org/snapshots/.

For questions about FreeBSD, read the + can be downloaded from http://www.FreeBSD.org/releases/.

For questions about FreeBSD, read the documentation before - contacting <questions@FreeBSD.org>.

All users of FreeBSD 10.0-STABLE should + contacting <questions@FreeBSD.org>.

All users of FreeBSD 10.1-STABLE should subscribe to the <stable@FreeBSD.org> mailing list.

For questions about this documentation, e-mail <doc@FreeBSD.org>.

\ No newline at end of file Modified: head/en_US.ISO8859-1/htdocs/releases/10.1R/relnotes.html ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/10.1R/relnotes.html Tue Oct 14 10:06:25 2014 (r45822) +++ head/en_US.ISO8859-1/htdocs/releases/10.1R/relnotes.html Tue Oct 14 12:43:56 2014 (r45823) @@ -1,5 +1,5 @@ -FreeBSD 10.0-STABLE Release Notes

FreeBSD 10.0-STABLE Release Notes

The FreeBSD Project

FreeBSD 10.1-RELEASE Release Notes

The FreeBSD Project

FreeBSD is a registered trademark of the FreeBSD Foundation.

IBM, AIX, OS/2, PowerPC, PS/2, S/390, and ThinkPad are @@ -18,27 +18,29 @@ as trademarks. Where those designations appear in this document, and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the “™” or the - “®” symbol.

Last modified on 2014-09-25 by gjb.

Abstract

The release notes for FreeBSD 10.0-STABLE contain + “®” symbol.

Last modified on 2014-09-25 by gjb.

Abstract

The release notes for FreeBSD 10.1-RELEASE contain a summary of the changes made to the FreeBSD base system on the - 10.0-STABLE development line. This document lists + 10.1-STABLE development line. This document lists applicable security advisories that were issued since the last release, as well as significant changes to the FreeBSD kernel and userland. Some brief remarks on upgrading are also presented.

Table of Contents

1. Introduction
2. What's New
3. Upgrading from Previous Releases of FreeBSD

1. Introduction

This document contains the release notes for FreeBSD - 10.0-STABLE. It describes recently added, changed, or + 10.1-RELEASE. It describes recently added, changed, or deleted features of FreeBSD. It also provides some notes on - upgrading from previous versions of FreeBSD.

The snapshot distribution to - which these release notes apply represents a point along the - 10.0-STABLE development branch between 10.0-RELEASE and - the future 10.1-RELEASE. Information regarding pre-built, - binary snapshot distributions along this branch can be - found at http://www.FreeBSD.org/snapshots/.

All users are encouraged to consult the release errata + upgrading from previous versions of FreeBSD.

This distribution of FreeBSD + 10.1-RELEASE is a release distribution. It can be + found at http://www.FreeBSD.org/releases/ or + any of its mirrors. More information on obtaining this (or + other) release distributions of FreeBSD can be found in the + “Obtaining + FreeBSD” appendix to the FreeBSD + Handbook.

All users are encouraged to consult the release errata before installing FreeBSD. The errata document is updated with “late-breaking” information discovered late in the release cycle or after the release. Typically, it contains information on known bugs, security advisories, and corrections to documentation. An up-to-date copy of the errata for FreeBSD - 10.0-STABLE can be found on the FreeBSD Web site.

2. What's New

This section describes the most user-visible new or changed + 10.1-RELEASE can be found on the FreeBSD Web site.

2. What's New

This section describes the most user-visible new or changed features in FreeBSD since 10.0-RELEASE.

Typical release note items document recent security advisories issued after 10.0-RELEASE, new drivers or hardware support, new commands or options, major bug fixes, or @@ -219,7 +221,7 @@ updated to version 7.4.2. [r269196]

The ixgbe(4) tunables have been renamed to match their sysctl(8) counterparts: [r269975]

Old Name	New Name
`hw.ixgbe.enable_aim`	`hw.ix.enable_aim`
`hw.ixgbe.max_interrupt_rate`	`hw.ix.max_interrupt_rate`
`hw.ixgbe.rx_process_limit`	`hw.ix.rx_process_limit`
`hw.ixgbe.tx_process_limit`	`hw.ix.tx_process_lim it`
`hw.ixgbe.enable_msix`	`hw.ix.enable_msix`
`hw.ixgbe.num_queues`	`hw.ix.num_queues`
`hw.ixgbe.txd`	`hw.ix.txd`
`hw.ixgbe.rxd`	`hw.ix.rxd`
`hw.ixgbe.unsupported_sfp`	`hw.ix.unsupported_sfp`

Be sure to update loader.conf(5) if using the old tunables before upgrading to - FreeBSD 10.0-STABLE.

The if_nf10bmac(4) driver has + FreeBSD 10.1-RELEASE.

The if_nf10bmac(4) driver has been merged from FreeBSD-CURRENT to support the NetFPGA-10G Embedded CPU Ethernet Core. [r270061]

The cxgbe(4) driver has been updated to support netmap(4) for the T5 10G/40G @@ -730,9 +732,9 @@ /usr/src/UPDATING.

Important:

Upgrading FreeBSD should only be attempted after backing up all data and configuration files.

This file, and other release-related documents, - can be downloaded from http://www.FreeBSD.org/snapshots/.

For questions about FreeBSD, read the + can be downloaded from http://www.FreeBSD.org/releases/.

For questions about FreeBSD, read the documentation before - contacting <questions@FreeBSD.org>.

All users of FreeBSD 10.0-STABLE should + contacting <questions@FreeBSD.org>.

All users of FreeBSD 10.1-STABLE should subscribe to the <stable@FreeBSD.org> mailing list.

For questions about this documentation, e-mail <doc@FreeBSD.org>.

\ No newline at end of file