Date: Thu, 2 Dec 1999 23:18:17 -0500 (EST) From: nrrobins@unity.ncsu.edu To: freebsd-questions@freebsd.org Subject: ppp troubles: failed to open /dev/cuaa0 Message-ID: <199912030418.XAA17123@uni01du.unity.ncsu.edu>
next in thread | raw e-mail | index | archive | help
Hello, I just cvsup'd and did a "make world" successfully to 3.3-Stable this afternoon and now I am trying to connect to the internet again. I know it worked before hand, and I am pretty sure I used the connection afterwards, but not certain. I left for work and when I returned I started to get an error and have not been able to connect since. My modem is a external Boca 33.6 that I have had success with since 3.1. Here is my ppp.conf: default: set log Phase Chat LCP IPCP CCP tun command set device /dev/cuaa0 set speed 115200 set dial "ABORT BUSY ABORT ...." isp: set phone 1234567 set timeout 0 set authname username set authkey password set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns Here is the command I use to start PPP: # ppp isp # ppp ON myname> dial # ppp on myname> and it just sits there doing nothing. Here is my info from my ppp.log file: Phase: Using interface: tun0 Phase: deflink: Created in closed state tun0: Command: default: set device /dev/cuaa0 tun0: Command: default: set speed 115200 tun0: Command: default: set dial ABORT BUSY ABORT .... tun0: Command: isp: set phone 1234567 tun0: Command: isp: set timeout 0 tun0: Command: isp: set authname username tun0: Command: isp: set authkey password tun0: Command: isp: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 tun0: Command: isp: add default HISADDR tun0: Command: isp: enable dns tun0: Phase: PPP started (Interactive mode) tun0: Command: /dev/tty: term tun0: Phase: bundle: Establish tun0: Phase: deflink: closed -> opening tun0: Phase: /dev/cuaa0 is in use: uu_lock creat error: No such file or directory tun0: Chat: Failed to open device tun0: Phase: deflink: opening -> closed tun0: Phase: bundle: Dead tun0: Command: /dev/tty: quit tun0: Phase: PPP Terminated (normal) cuaa0 exists (dmesg reports it found and I did a MAKEDEV) but when I try a manual ppp with term I dont see the lights on the modem acting up in response. What might be the solution to this? I did not see anything in the archives specifically regarding this. Thanks. -Neill To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912030418.XAA17123>