Date: Fri, 5 Aug 2005 02:10:31 +0200 From: Marcin Jessa <lists@yazzy.org> To: Stephane Raimbault <stephane@enertiasoft.com> Cc: freebsd-net@freebsd.org Subject: Re: How-to use CARP? Message-ID: <20050805021031.21dbcf52.lists@yazzy.org> In-Reply-To: <F6D71550-0E6A-40CC-9ED3-2AA00F4ECF46@enertiasoft.com> References: <F6D71550-0E6A-40CC-9ED3-2AA00F4ECF46@enertiasoft.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi. Here is a good link http://www.countersiege.com/doc/pfsync-carp/ Cheers, Marcin Jessa On Wed, 3 Aug 2005 15:40:39 -0600 Stephane Raimbault <stephane@enertiasoft.com> wrote: > Hi all, > > I'm having a bit of a problem running 5.4-RELEASE and carp. All the > documentation that I read (man carp and other web based sources) > indicate to simply create my carp interface as follows: > > ifconfig carp0 create > > However when I run this... I get the following error: > > # ifconfig carp0 create > ifconfig: SIOCIFCREATE: Invalid argument > # > > > Any thoughts or comments that can steer me in the right direction > would be appreciated. > > > I'm sure I'm missing something obvious... here's my dmesg.boot > > > # cat /var/run/dmesg.boot > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 > root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > ACPI APIC Table: <IntelR AWRDACPI> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2660.46-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE > ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 528416768 (503 MB) > avail memory = 507523072 (484 MB) > ioapic0 <Version 2.0> irqs 0-23 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <IntelR AWRDACPI> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82845G (845G GMCH) SVGA controller> mem > 0xec100000-0xec17ffff,0xe0000000-0xe7ffffff irq 16 at device 2.0 on pci0 > agp0: detected 8060k stolen memory > agp0: aperture size is 128M > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f > irq 16 at device 29.0 on pci0 > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f > irq 19 at device 29.1 on pci0 > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f > irq 18 at device 29.2 on pci0 > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xa000-0xa03f mem 0xec000000-0xec01ffff irq 22 at device 5.0 on pci1 > em0: Ethernet address: 00:30:48:42:49:c4 > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xa400-0xa43f mem 0xec020000-0xec03ffff irq 23 at device 6.0 on pci1 > em1: Ethernet address: 00:30:48:42:49:c5 > em1: Speed:N/A Duplex:N/A > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port 0xcc00-0xcc0f, > 0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > on acpi0 > sio0: type 16550A, console > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 > drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > orm0: <ISA Option ROMs> at iomem 0xce000-0xcf7ff,0xcc000-0xcd7ff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounter "TSC" frequency 2660461336 Hz quality 800 > Timecounters tick every 10.000 msec > ad0: 38166MB <WDC WD400JB-00ENA0/05.03E05> [77545/16/63] at ata0- > master UDMA100 > acd0: CDROM <MATSHITA CR-177/7T0D> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > # > > > Thank you, > Stephane. > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050805021031.21dbcf52.lists>