Date: Sun, 11 Jul 1999 19:49:30 -1000 From: Richard Puga <puga@mauibuilt.com> To: freebsd-hackers@freebsd.org, freebsd-hardware@freebsd.org Subject: WaveLAN problem Message-ID: <378981EA.5CC31B1C@mauibuilt.com>
next in thread | raw e-mail | index | archive | help
I have a WaveLAN ISA adaptor. I am trying to run it in a machine equiped with an AMD K6-2 350 processor running at 66mhz bus speed. I am getting the following error while ifconfiging the card. ifconfig wl0 192.168.10.1 ifconfig: ioctl (SIOCAIFADDR): File exists cray100 /root 2% Jul 12 03:43:23 cray100 /kernel: wl0: diag() failed; status = 0, inw = 0, outw = e0a0 Jul 12 03:43:23 cray100 /kernel: wl0: diag() failed; status = 0, inw = 0, outw = e0a0 Jul 12 03:43:23 cray100 /kernel: scb_status a000 Jul 12 03:43:23 cray100 /kernel: scb_status a000 Jul 12 03:43:23 cray100 /kernel: scb_command 0 Jul 12 03:43:23 cray100 /kernel: scb_command 0 Jul 12 03:43:23 cray100 /kernel: scb_cbl ffc0 Jul 12 03:43:23 cray100 /kernel: scb_cbl ffc0 Jul 12 03:43:23 cray100 /kernel: cu_cmd 8007 Jul 12 03:43:23 cray100 /kernel: cu_cmd 8007 Jul 12 03:43:23 cray100 /kernel: wl0 init(): trouble resetting board. Jul 12 03:43:23 cray100 /kernel: wl0 init(): trouble resetting board. I belive the issure is some kind of timeing problem because the dos drivers and ptpdiag work and the card works with freebsd in other machines. I have tried about everything I can think of I have set machdep.wl_xmit_delay: up and down as well as played with clock speeds of the CPU and motherboard as well as bios wait states, pnp settings ect. and differant wavelan cards. I even reset the factory setting off 0x300 irq 10 to other ones just to be sure.. I have tried the drivers in 3.0 3.1 and 4.0 current they all do the same thing.. thease are the current dmesg settings wl0 at 0x390-0x39f irq 5 on isa wl0: address 08:00:6a:2b:e3:30, NWID 0x5262, Freq 2422 MHz and the wlconfig info... cray100 /root 6% wlconfig wl0 Board type : ISA Base address options : 0x300, 0x390, 0x3c0, 0x3e0 Waitstates : 0 Bus mode : ISA IRQ : 5 Default MAC address : 08:00:6a:2b:e3:30 Soft MAC address : 00:00:00:00:00:00 Current MAC address : Default Adapter compatability : PCCARD or 1/2 size AT, 915MHz or 2.4GHz Threshold preset : 1 Call code required : NO Subband : 915MHz/see WaveModem Quality threshold : 3 Hardware version : 1 (Rel3) Network ID enable : YES NWID : 0x5262 Datalink security : NO Databus width : 16 (variable) Configuration state : unconfigured CRC-16 : 0xaba1 CRC status : OK If anyone can help in any way or point me to someone who might I would greatly apreciate it. Thanks in advance Richard Puga puga@mauibuilt.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?378981EA.5CC31B1C>