From owner-freebsd-mobile Thu Feb 14 7:11:36 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mailhost.stack.nl (vaak.stack.nl [131.155.140.140]) by hub.freebsd.org (Postfix) with ESMTP id 31C9137B400 for ; Thu, 14 Feb 2002 07:11:26 -0800 (PST) Received: from toad.stack.nl (toad.stack.nl [2001:610:1108:5010:202:b3ff:fe17:9e1a]) by mailhost.stack.nl (Postfix) with ESMTP id 3FE9C3D852 for ; Thu, 14 Feb 2002 16:11:24 +0100 (CET) Received: by toad.stack.nl (Postfix, from userid 816) id CC2E09631; Thu, 14 Feb 2002 16:11:23 +0100 (CET) Subject: pccard not recognised by 4.5 succesfully installed To: freebsd-mobile@freebsd.org Date: Thu, 14 Feb 2002 16:11:23 +0100 (CET) X-Mailer: ELM [version 2.4ME+ PL88 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Message-Id: <20020214151123.CC2E09631@toad.stack.nl> From: marcov@stack.nl (Marco van de Voort) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org I got the "Dynalink lc100c16" pcmcia card working using 4.5, and though a trivial exercise (20 minutes, no previous pcmcia exposure), I though the info could be useful for auto detection in later versions. Note: I'm not subscribed to this list, if somebody needs extra data/wants me to perform tests (Notebook: Dell cpi 233), please mail me directly. Vendor: Dynalink (Tulip.com all over the box??!?) card lc100c16 (16 bit 10/100 UTP) Award winning pccard.conf data: card "Dynalink" "L100C16" config auto "ed0" ? 0x9 insert /etc/pccard_ether ed0 link0 -link1 remove /sbin/ifconfig ed0 delete dumpcis: (for people that know what to look for) Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x15 (Version 1 info), length = 26 000: 04 01 44 79 6e 61 6c 69 6e 6b 00 4c 31 30 30 43 010: 31 36 00 56 00 31 2e 30 00 ff Version = 4.1, Manuf = [Dynalink], card vers = [L100C16] Addit. info = [V],[1.0] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: ff ff 90 10 PCMCIA ID = 0xffff, OEM ID = 0x1090 Tuple #4, code = 0x1a (Configuration map), length = 5 000: 01 01 c0 03 63 Reg len = 2, config register addr = 0x3c0, last config = 0x1 Registers: XX---XX- Tuple #5, code = 0x1b (Configuration entry), length = 11 000: c7 81 19 07 55 4d 5d 65 30 ff ff Config index = 0x7(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Card decodes 5 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #6, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 00 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 20 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 40 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 60 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x360 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 00 02 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x200 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 20 02 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x220 block length = 0x20 Tuple #12, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #13, code = 0x22 (Functional EXT), length = 2 000: 01 02 Network technology: Ethernet Tuple #14, code = 0x22 (Functional EXT), length = 2 000: 02 64 Wrong length for network extension tuple Tuple #15, code = 0x22 (Functional EXT), length = 2 000: 03 01 Network media: UTP Tuple #16, code = 0xff (Terminator), length = 0 2 slots found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message