Date: Thu, 22 Oct 1998 14:22:26 +0200 From: Lars =?iso-8859-1?Q?K=F6ller?= <lkoeller@cc.fh-lippe.de> To: freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Cc: lkoeller@odie.lippe.de, Lars.Koeller@Uni-Bielefeld.DE Subject: Still freeze with 3.0-RELEASE, PLEASE give me any suggestions!! Message-ID: <199810221222.OAA01073@odie.lippe.de>
next in thread | raw e-mail | index | archive | help
This is a multipart MIME message. --==_Exmh_-3533862440 Content-Type: text/plain; charset=us-ascii -------- Hello again! I've just upgraded my 3.0CAM SNAP to 3.0-RELEASE with no problems. But there are still a freeze of the system soon after I've enabled X11. This is not the kind of a proof X11 is responsibe for the problems, but more like an intuition. Again, the hole system is running very very stable with 2.2.7!! The hardware is a Tyan Titan Pro with 2x200 MHz PPro and 64MB RAM, Matrox Millenium (8MB). (Xserver version, etc. see attachment). I also change the BIOS values to slower RAM access and disable some features, no change. Andreas Klemm which own the same Board has no such freezes with the same BIOS settings! I've also reserved IRQ 15 for the video card (could be set in the BIOS) cause else it's occupied by the Adaptec 2940: ahc1 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 15 on pci0:13:0 Again no change (after this IRQ 15 is occupied by the vga device and the Adaptec is on IRQ 2)! The system freezes with both SMP and NO-SMP, I've also changed the RAM, the PPro slot 0->1, 1->0, no change at all. 2.2.7-RELEASE is stable, 3.0 freezes with no message on the console, until today!!! I've get the following panic: kernel: type 12 trap, code = 0 Stopped at _dasendorderedtag+0x15: cmpl $0,0xb4(%ebx) db> show registers cs 0x8 ds 0x582a0010 es 0xf01e0010 _vid_set_border+0xb8 ss 0x10 eax 0xc0000000 ecx 0xf1c9ec38 edx 0 ebx 0x306c esp 0xf01ecf8c _etext+0x2b4c ebp 0xf01ecf90 _etext+0x2b50 esi 0xf01f1f8? _dasendorderedtag (sorry, address wrong noted) edi 0xc0000000 eip 0xf010f20d _dasendorderedtag+0x15 efl 0x10286 The hole upgrade/install (aout to elf) was done with X11 disabled. Any suggestions are welcome! Thanks Lars E-Mail: | Lars Koeller Lars.Koeller@Uni-Bielefeld.DE | UNIX Sysadmin lkoeller@cc.fh-lippe.de | Computing Center PGP-key: | University of Bielefeld http://www.nic.surfnet.nl/pgp/pks-toplev.html | Germany ----------- FreeBSD, what else? ---- http://www.freebsd.org ------------- --==_Exmh_-3533862440 Content-Type: text/plain ; name="messages"; charset=us-ascii Content-Description: messages Content-Disposition: attachment; filename="messages" Oct 22 12:23:53 odie /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Oct 22 12:23:53 odie /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Oct 22 12:23:53 odie /kernel: The Regents of the University of California. All rights reserved. Oct 22 12:23:53 odie /kernel: FreeBSD 3.0-RELEASE #0: Thu Oct 22 10:32:22 CEST 1998 Oct 22 12:23:53 odie /kernel: root@odie.lippe.de:/usr/src/sys/compile/GENERICupgrade Oct 22 12:23:53 odie /kernel: Timecounter "i8254" frequency 1193182 Hz cost 3345 ns Oct 22 12:23:53 odie /kernel: CPU: Pentium Pro (199.43-MHz 686-class CPU) Oct 22 12:23:53 odie /kernel: Origin = "GenuineIntel" Id = 0x619 Stepping=9 Oct 22 12:23:53 odie /kernel: Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> Oct 22 12:23:53 odie /kernel: real memory = 67108864 (65536K bytes) Oct 22 12:23:53 odie /kernel: avail memory = 62799872 (61328K bytes) Oct 22 12:23:53 odie /kernel: Probing for devices on PCI bus 0: Oct 22 12:23:53 odie /kernel: Correcting Natoma config for non-SMP Oct 22 12:23:53 odie /kernel: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 Oct 22 12:23:53 odie /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 Oct 22 12:23:53 odie /kernel: ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 14 on pci0.12.0 Oct 22 12:23:53 odie /kernel: ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Oct 22 12:23:53 odie /kernel: ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 15 on pci0.13.0 Oct 22 12:23:53 odie /kernel: ahc1: aic7880 Wide Channel A, SCSI Id Oct 22 12:23:53 odie /kernel: =7, 16/255 SCBs Oct 22 12:23:53 odie /kernel: vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 255 on pci0.14.0 Oct 22 12:23:53 odie /kernel: Probing for devices on the ISA bus: Oct 22 12:23:53 odie /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Oct 22 12:23:53 odie /kernel: sc0: VGA color <8 virtual consoles, flags=0x0> Oct 22 12:23:53 odie /kernel: psm0 at 0x60-0x64 irq 12 on motherboard Oct 22 12:23:53 odie /kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 22 12:23:53 odie /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Oct 22 12:23:53 odie /kernel: sio0: type 16550A Oct 22 12:23:53 odie /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Oct 22 12:23:53 odie /kernel: sio1: type 16550A Oct 22 12:23:53 odie /kernel: lpt0 at 0x378-0x37f irq 7 on isa Oct 22 12:23:53 odie /kernel: lpt0: Interrupt-driven port Oct 22 12:23:53 odie /kernel: lp0: TCP/IP capable interface Oct 22 12:23:53 odie /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Oct 22 12:23:53 odie /kernel: fdc0: FIFO enabled, 8 bytes threshold Oct 22 12:23:53 odie /kernel: fd0: 1.44MB 3.5in Oct 22 12:23:53 odie /kernel: fd1: 1.2MB 5.25in Oct 22 12:23:53 odie /kernel: apm0 on isa Oct 22 12:23:53 odie /kernel: apm: found APM BIOS version 1.2 Oct 22 12:23:53 odie /kernel: npx0 on motherboard Oct 22 12:23:53 odie /kernel: npx0: INT 16 interface Oct 22 12:23:53 odie /kernel: sb0 at 0x220 irq 5 drq 1 on isa Oct 22 12:23:53 odie /kernel: snd0: <SoundBlaster 16 4.13> Oct 22 12:23:53 odie /kernel: sbxvi0 at ? drq 5 on isa Oct 22 12:23:53 odie /kernel: snd0: <SoundBlaster 16 4.13> Oct 22 12:23:53 odie /kernel: sbmidi0 at 0x330 on isa Oct 22 12:23:53 odie /kernel: snd0: <SoundBlaster MPU-401> Oct 22 12:23:53 odie /kernel: awe0 at 0x620 on isa Oct 22 12:23:53 odie /kernel: AWE32: not detected Oct 22 12:23:53 odie /kernel: Oct 22 12:23:54 odie /kernel: ccd0-3: Concatenated disk drivers Oct 22 12:23:54 odie /kernel: Waiting 8 seconds for SCSI devices to settle Oct 22 12:23:54 odie /kernel: ahc0:A:6: Missed busfree Oct 22 12:23:54 odie /kernel: . Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x44 Oct 22 12:23:54 odie /kernel: SEQADDR == 0x8 Oct 22 12:23:54 odie /kernel: SSTAT1 == 0x13 Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): Queuing a BDR SCB Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x44 Oct 22 12:23:54 odie /kernel: SEQADDR == 0x4 Oct 22 12:23:54 odie /kernel: SSTAT1 == 0x13 Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): no longer in timeout, status = 34b Oct 22 12:23:54 odie /kernel: ahc0: Issued Channel A Bus Reset. 4 SCBs aborted Oct 22 12:23:54 odie /kernel: sa1 at ahc0 bus 0 target 6 lun 0 Oct 22 12:23:54 odie /kernel: sa1: <HP C1533A 9503> Removable Sequential Access SCSI2 device Oct 22 12:23:54 odie /kernel: sa1: 3.300MB/s transfers Oct 22 12:23:54 odie /kernel: da2 at ahc1 bus 0 target 8 lun 0 Oct 22 12:23:54 odie /kernel: da2: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da2: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:23:54 odie /kernel: da3 at ahc1 bus 0 target 9 lun 0 Oct 22 12:23:54 odie /kernel: da3: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:23:54 odie /kernel: changing root device to da0s2a Oct 22 12:23:54 odie /kernel: ch0 at ahc0 bus 0 target 5 lun 0 Oct 22 12:23:54 odie /kernel: Oct 22 12:23:54 odie /kernel: ch0: <ADIC DAT AutoChanger 0360> Removable Changer SCSI2 device Oct 22 12:23:54 odie /kernel: ch0: 3.300MB/s transfers Oct 22 12:23:54 odie /kernel: ch0: 12 slots, 1 drive, 1 picker, 1 portal Oct 22 12:23:54 odie /kernel: da1 at ahc0 bus 0 target 1 lun 0 Oct 22 12:23:54 odie /kernel: da1: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da1: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:23:54 odie /kernel: da0 at ahc0 bus 0 target 0 lun 0 Oct 22 12:23:54 odie /kernel: da0: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): ILLEGAL REQUEST asc:25,0 Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): Logical unit not supported Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): fatal error, failed to attach to device(da4:ahc0:0:6:3): removing device entry Oct 22 12:23:54 odie /kernel: WARNING: / was not properly dismounted Oct 22 12:24:00 odie lpd[151]: restarted Oct 22 12:24:05 odie /kernel: PCM device 1 not installed. Oct 22 12:24:06 odie dattape: dattape: Using tapedevice /dev/nrsa1 Oct 22 12:24:06 odie dattape: dattape: Listening to port 620 Oct 22 12:24:20 odie login: ROOT LOGIN (root) ON ttyv0 Oct 22 12:27:22 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 64 Oct 22 12:27:23 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 63 Oct 22 12:44:15 odie /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Oct 22 12:44:15 odie /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Oct 22 12:44:15 odie /kernel: The Regents of the University of California. All rights reserved. Oct 22 12:44:15 odie /kernel: FreeBSD 3.0-RELEASE #0: Thu Oct 22 10:32:22 CEST 1998 Oct 22 12:44:15 odie /kernel: root@odie.lippe.de:/usr/src/sys/compile/GENERICupgrade Oct 22 12:44:15 odie /kernel: Timecounter "i8254" frequency 1193182 Hz cost 3342 ns Oct 22 12:44:15 odie /kernel: CPU: Pentium Pro (199.43-MHz 686-class CPU) Oct 22 12:44:15 odie /kernel: Origin = "GenuineIntel" Id = 0x619 Stepping=9 Oct 22 12:44:15 odie /kernel: Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> Oct 22 12:44:15 odie /kernel: real memory = 67108864 (65536K bytes) Oct 22 12:44:15 odie /kernel: avail memory = 62799872 (61328K bytes) Oct 22 12:44:15 odie /kernel: Probing for devices on PCI bus 0: Oct 22 12:44:15 odie /kernel: Correcting Natoma config for non-SMP Oct 22 12:44:15 odie /kernel: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 Oct 22 12:44:15 odie /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 Oct 22 12:44:15 odie /kernel: ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 14 on pci0.12.0 Oct 22 12:44:15 odie /kernel: ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Oct 22 12:44:15 odie /kernel: ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 15 on pci0.13.0 Oct 22 12:44:15 odie /kernel: ahc1: aic7880 Wide Channel A, SCSI Id Oct 22 12:44:15 odie /kernel: =7, 16/255 SCBs Oct 22 12:44:15 odie /kernel: vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 255 on pci0.14.0 Oct 22 12:44:15 odie /kernel: Probing for devices on the ISA bus: Oct 22 12:44:15 odie /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Oct 22 12:44:15 odie /kernel: sc0: VGA color <8 virtual consoles, flags=0x0> Oct 22 12:44:15 odie /kernel: psm0 at 0x60-0x64 irq 12 on motherboard Oct 22 12:44:15 odie /kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 22 12:44:16 odie /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Oct 22 12:44:16 odie /kernel: sio0: type 16550A Oct 22 12:44:16 odie /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Oct 22 12:44:16 odie /kernel: sio1: type 16550A Oct 22 12:44:16 odie /kernel: lpt0 at 0x378-0x37f irq 7 on isa Oct 22 12:44:16 odie /kernel: lpt0: Interrupt-driven port Oct 22 12:44:16 odie /kernel: lp0: TCP/IP capable interface Oct 22 12:44:16 odie /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Oct 22 12:44:16 odie /kernel: fdc0: FIFO enabled, 8 bytes threshold Oct 22 12:44:16 odie /kernel: fd0: 1.44MB 3.5in Oct 22 12:44:16 odie /kernel: fd1: 1.2MB 5.25in Oct 22 12:44:16 odie /kernel: apm0 on isa Oct 22 12:44:16 odie /kernel: apm: found APM BIOS version 1.2 Oct 22 12:44:16 odie /kernel: npx0 on motherboard Oct 22 12:44:16 odie /kernel: npx0: INT 16 interface Oct 22 12:44:16 odie /kernel: sb0 at 0x220 irq 5 drq 1 on isa Oct 22 12:44:16 odie /kernel: snd0: <SoundBlaster 16 4.13> Oct 22 12:44:16 odie /kernel: sbxvi0 at ? drq 5 on isa Oct 22 12:44:16 odie /kernel: snd0: <SoundBlaster 16 4.13> Oct 22 12:44:16 odie /kernel: sbmidi0 at 0x330 on isa Oct 22 12:44:16 odie /kernel: snd0: <SoundBlaster MPU-401> Oct 22 12:44:16 odie /kernel: awe0 at 0x620 on isa Oct 22 12:44:16 odie /kernel: AWE32: not detected Oct 22 12:44:16 odie /kernel: Oct 22 12:44:16 odie /kernel: ccd0-3: Concatenated disk drivers Oct 22 12:44:16 odie /kernel: Waiting 8 seconds for SCSI devices to settle Oct 22 12:44:16 odie /kernel: sa0 at ahc0 bus 0 target Oct 22 12:44:16 odie /kernel: 3 lun 0 Oct 22 12:44:16 odie /kernel: sa0: <ARCHIVE Python 28388-XXX 5ACB> Removable Sequential Access SCSI2 device Oct 22 12:44:16 odie /kernel: sa0: 7.812MB/s transfers (7.812MHz, offset 15) Oct 22 12:44:16 odie /kernel: sa1 at ahc0 bus 0 target 6 lun 0 Oct 22 12:44:16 odie /kernel: sa1: <HP C1533A 9503> Removable Sequential Access SCSI2 device Oct 22 12:44:16 odie /kernel: sa1: 10.0MB/s transfers (10.0MHz, offset 8) Oct 22 12:44:16 odie /kernel: da1 at ahc0 bus 0 target 1 lun 0 Oct 22 12:44:16 odie /kernel: da1: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI2 device Oct 22 12:44:16 odie /kernel: da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da1: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:44:16 odie /kernel: da2 at ahc1 bus 0 target 8 lun 0 Oct 22 12:44:16 odie /kernel: da2: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device Oct 22 12:44:16 odie /kernel: da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da2: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:44:16 odie /kernel: da3 at ahc1 bus 0 target 9 lun 0 Oct 22 12:44:16 odie /kernel: da3: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device Oct 22 12:44:16 odie /kernel: da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:44:16 odie /kernel: da0 at ahc0 bus 0 target 0 lun 0 Oct 22 12:44:16 odie /kernel: da0: <SEAGATE ST15150N 0017> Fixed D Oct 22 12:44:16 odie /kernel: irect Access SCSI2 device Oct 22 12:44:16 odie /kernel: da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:44:16 odie /kernel: cd0 at ahc0 bus 0 target 4 lun 0 Oct 22 12:44:16 odie /kernel: cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI2 device Oct 22 12:44:16 odie /kernel: cd0: 10.0MB/s transfers (10.0MHz, offset 15) Oct 22 12:44:16 odie /kernel: cd0: cd present [304767 x 2048 byte records] Oct 22 12:44:16 odie /kernel: ch0 at ahc0 bus 0 target 5 lun 0 Oct 22 12:44:16 odie /kernel: ch0: <ADIC DAT AutoChanger 0360> Removable Changer SCSI2 device Oct 22 12:44:16 odie /kernel: ch0: 3.300MB/s transfers Oct 22 12:44:16 odie /kernel: ch0: 12 slots, 1 drive, 1 picker, 1 portal Oct 22 12:44:16 odie /kernel: changing root device to da0s2a Oct 22 12:44:16 odie /kernel: WARNING: / was not properly dismounted Oct 22 12:44:19 odie lpd[196]: restarted Oct 22 12:44:24 odie /kernel: PCM device 1 not installed. Oct 22 12:44:25 odie dattape: dattape: Using tapedevice /dev/nrsa1 Oct 22 12:44:25 odie dattape: dattape: Listening to port 620 Oct 22 12:44:46 odie login: ROOT LOGIN (root) ON ttyv0 Oct 22 12:46:21 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 64 Oct 22 12:46:22 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 63 Oct 22 12:46:44 odie login: ROOT LOGIN (root) ON ttyv1 Oct 22 13:03:25 odie /kernel: (da2:ahc1:0:8:0): tagged openings now 64 Oct 22 13:03:25 odie /kernel: (da2:ahc1:0:8:0): tagged openings now 63 Oct 22 13:03:55 odie /kernel: (da3:ahc1:0:9:0): tagged openings now 64 Oct 22 13:03:55 odie /kernel: (da3:ahc1:0:9:0): tagged openings now 63 Oct 22 13:31:37 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 64 Oct 22 13:31:38 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 62 Oct 22 13:31:38 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 61 --==_Exmh_-3533862440 Content-Type: text/plain ; name="ODIE"; charset=us-ascii Content-Description: ODIE Content-Disposition: attachment; filename="ODIE" # # ODIE kernel config file # machine "i386" cpu "I686_CPU" # aka Pentium Pro(tm) ident ODIE maxusers 32 config kernel root on da1 # This allows you to actually store this configuration file into # the kernel binary itself, where it may be later read by saying: # strings /kernel | grep ^___ | sed -e 's/^___//' > MYKERNEL # options INCLUDE_CONFIG_FILE # Include this file in kernel # Create a SMP capable kernel (mandatory options): #options SMP #Smmetric Multiprocessor Kernel #options APIC_IO #Smmetric (APIC) I/O # Lets always enable the kernel debugger for SMP. options DDB # # Certain applications can grow to be larger than the 128M limit # that FreeBSD initially imposes. Below are some options to # allow that limit to grow to 256MB, and can be increased further # with changing the parameters. MAXDSIZ is the maximum that the # limit can be set to, and the DFLDSIZ is the default value for # the limit. You might want to set the default lower than the # max, and explicitly set the maximum with a shell command for processes # that regularly exceed the limit like INND. # options "MAXDSIZ=(256*1024*1024)" options "DFLDSIZ=(256*1024*1024)" options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options NFS #Network Filesystem #options MFS #Memory Filesystem #options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 #options MROUTING #Multicast routing options MAXCONS=8 #Number of max. allowed virt. consoles options QUOTA #enable disk quotas #options COMPAT_LINUX #Linux Emulator #options "COMPAT_IBCS2" #SCO & SYSV Emulator options PERFMON #Pentium (Pro) performance counters options SYSVSHM #System V shared memory support options SYSVSEM #System V Semophore support options SYSVMSG #System V Message support options UCONSOLE #Allow ordinary users to take the #console - this is useful for X. options XSERVER #include code for XFree86 options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SC_HISTORY_SIZE=512 #number of history buffer lines # # KTRACE enables the system-call tracing facility ktrace(2). # options KTRACE #kernel tracing # # ISA devices # controller isa0 options "AUTO_EOI_1" options "AUTO_EOI_2" controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 device apm0 at isa? #controller pnp0 # # PCI devices # controller pci0 options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device options SCSI_REPORT_GEOMETRY # Adaptec 2940[U/UW] SCSI Adapter controller ahc0 controller ahc1 # Devices connected device ch0 device da0 device sa0 device cd0 device pass0 # The syntax for wiring down devices is: # AH2940 U controller scbus0 at ahc0 # Seagate ST15150N disk da0 at scbus0 target 0 disk da1 at scbus0 target 1 # Seagate Python 28388, DDS2 tape sa0 at scbus0 target 3 # PIONEER CD-ROM DR-U12X auf ID 4 device cd0 at scbus? # Adic Autochanger mit HP DAT, DDS2 device ch0 at scbus0 target 5 tape sa1 at scbus0 target 6 # AH 2940 UW controller scbus1 at ahc1 # Seagate ST32171W disk da2 at scbus1 target 8 disk da3 at scbus1 target 9 # ps2 mouse device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr # sio1 (dcf-77) # serial console options BREAK_TO_DEBUGGER # a BREAK on a comconsole goes to DDB options CONSPEED=19200 #default speed for serial console (default 9600) device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ed0 at isa? port 0x280 net irq ? iomem 0xe8000 vector edintr # # Audio drivers: `snd', `sb', `pas', `gus', `pca' # controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device awe0 at isa? port 0x620 #device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr pseudo-device loop pseudo-device ether pseudo-device ccd 4 pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device bpfilter 4 pseudo-device sl 2 # ijppp uses tun instead of ppp device pseudo-device ppp 2 pseudo-device tun 3 pseudo-device pty 128 pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) # i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver) # note that the ``options'' and ``device'' lines must BOTH be defined ! # Teles S0/16.3 options "TEL_S0_16_3" device isic0 at isa? port 0xd80 net irq 10 flags 0x04 vector isicintr # i4b passive cards D channel handling # Q.921 pseudo-device "i4bq921" # Q.931 pseudo-device "i4bq931" # common passive and active layer 4 # layer 4 pseudo-device "i4b" # userland driver to do ISDN tracing (for passive cards oly) pseudo-device "i4btrc" 4 # userland driver to control the whole thing pseudo-device "i4bctl" # userland driver for access to raw B channel pseudo-device "i4brbch" 4 # userland driver for telephony pseudo-device "i4btel" 2 # network driver for IP over raw HDLC ISDN pseudo-device "i4bipr" 4 # enable VJ header compression detection for ipr i/f options IPR_VJ # network driver for sync PPP over ISDN pseudo-device "i4bisppp" 4 pseudo-device sppp 4 --==_Exmh_-3533862440 Content-Type: text/plain ; name="xdm.log"; charset=us-ascii Content-Description: xdm.log Content-Disposition: attachment; filename="xdm.log" XFree86 Version 3.3.2 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: March 2 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.0-980221-SNAP i386 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge, s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, generic Using syscons driver with X support (version 2.0) (using VT number 5) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) module xf86Jstk.so successfully loaded from /usr/X11R6/lib/modules (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us-de" (**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) SVGA: Graphics device ID: "Matrox Millenium 8MB" (**) SVGA: Monitor ID: "ELSA ECOMO 21H95" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/freefont,/usr/local/lib/pcemu/font" (--) SVGA: PCI: Matrox MGA 2064W rev 1, Memory @ 0xe0000000, 0xe1000000 (--) SVGA: Linear framebuffer at 0xE1000000 (--) SVGA: MMIO registers at 0xE0000000 (--) SVGA: Video BIOS info block at 0x000c7d00 (--) SVGA: chipset: mga2064w (--) SVGA: videoram: 8192k (**) SVGA: Option "hw_cursor" (**) SVGA: Option "dac_8_bit" (**) SVGA: Option "power_saver" (**) SVGA: Using 32 bpp, Depth 24, Color weight: 888 (--) SVGA: Maximum allowed dot-clock: 220.000 MHz (**) SVGA: Mode "1280x1024": mode clock = 157.500 (**) SVGA: Mode "1152x864": mode clock = 137.650 (**) SVGA: Mode "1024x768": mode clock = 115.500 (**) SVGA: Mode "800x600": mode clock = 69.650 (**) SVGA: Mode "640x480": mode clock = 45.800 (--) SVGA: Virtual resolution set to 1280x1024 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: MCLK set to 50.000 MHz (--) SVGA: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 10 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and stipples (--) SVGA: XAA: General lines and segments (--) SVGA: XAA: Dashed lines and segments xdm error (pid 335): fatal IO error 32 (Broken pipe) X connection to :0.0 broken (explicit kill or server shutdown). --==_Exmh_-3533862440-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199810221222.OAA01073>