Date: Thu, 19 Feb 1998 20:22:47 -0700 (MST) From: Jeff Reed <jreed@BSDI.COM> To: Greg Lehey <grog@lemis.com> Cc: freebsd-questions@FreeBSD.ORG, Jeff Reed <jreed@corp.BSDI.COM> Subject: Re: X11 Screen width short by 1.5" on laptop Message-ID: <Pine.BSI.3.95.980219201619.27321A-100000@corp.BSDI.COM> In-Reply-To: <19980220132643.40436@freebie.lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 20 Feb 1998, Greg Lehey wrote: > Oops. I forgot to tell you that you need to switch to the second > resolution with ctrl-alt-keypad+. This may be difficult to find on a > laptop. Try replacing the line with: > > Modes "800x600" > > > Also tried changing the Modeline line to: > > > > Modeline "800x600" 25.18 640 664 760 800 480 491 493 525 > > No, it can't. The label in "" is just a name. The real resolution is > in the numbers that follow: see the 640 and 480 in there? Don't let > the 800 confuse you: the resolutions are in the 2nd and 6th numbers. Changed first the "Mode" lines, then the Modeline line. In both cases it fails with: (--) SVGA: There is no mode definition named "800x600" Fatal server error: No valid modes found. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= **********The full error output follows: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= XFree86 Version 3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 4 1997 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2-STABLE i386 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic Using syscons driver with X support (version 2.0) (using VT number 13) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc101)" (**) XKB: geometry: "pc" (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: Microsoft, device: /dev/ttyd0, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) SVGA: Graphics device ID: "Chips & Technologies CT65548" (**) SVGA: Monitor ID: "My Monitor" (--) SVGA: Invalid horizontal timing for mode "800x600". Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon ts/100dpi/" (--) SVGA: CHIPS: chip revision: 4 (--) SVGA: Chipset: ct65548 (--) SVGA: CHIPS: no monitor detected. (--) SVGA: CHIPS: 1024 kB VRAM (--) SVGA: CHIPS: DD-STN probed. (--) SVGA: CHIPS: LCD (--) SVGA: CHIPS: Display Size: x=800; y=600 (--) SVGA: CHIPS: Frame Buffer used. (--) SVGA: CHIPS: Using embedded Frame Buffer. (--) SVGA: CHIPS: Frame Accelerator Enabled. (--) SVGA: CHIPS: VL Bus (--) SVGA: CHIPS: base address is set at 0x7800000. (--) SVGA: CHIPS: Linear addressing is enabled at 0x7800000. (--) SVGA: CHIPS: Internal DAC disabled. (--) SVGA: CHIPS: syncronous reset ignored. (--) SVGA: CHIPS: using programmable clocks. (--) SVGA: chipset: ct65548 (--) SVGA: videoram: 1024k (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 80.000 MHz (--) SVGA: There is no mode definition named "800x600" Fatal server error: No valid modes found. When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.95.980219201619.27321A-100000>