Date: Wed, 14 Jun 1995 12:33:48 +0200 (GMT+0200) From: ccdw@kudu.ru.ac.za (Dave Wilson) To: freebsd-questions@freebsd.org Subject: 2.0.5 network config woes Message-ID: <m0sLplc-000CPXC@kudu.ru.ac.za>
next in thread | raw e-mail | index | archive | help
I'm having problems with configuring my network interface with the 2.0.5 installation. First of all, when I select 'configure network' from the sysinstall menu, I don't get any prompts coming up for any of the parameters. Ok, so I finished the install, rebooted, and edited /etc/sysconfig instead to add ifconfig for ed0, but it is now giving 'edo device timeout' messages. The following is the dmesg output: avail memory = 6623232 (1617 pages) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa ed0: address 00:00:c0:23:c9:4e, type WD8013EPC (16 bit) ed1 not probed due to maddr conflict with ed0 at 0xd8000 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 sio2 not found at 0x3e8 sio3 not found at 0x2e8 lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff lpt2 not found at 0xffffffff fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 ahc1 not found ahb0 not found aha0: AHA-1542CF BIOS v2.01-VB.0, enabling mailbox, enabling residuals aha0: reading board settings, dma=5 int=11 (bus speed defaulted) aha0 at 0x330-0x333 irq 11 drq 5 on isa aha0 waiting for scsi devices to settle (aha0:0:0): "SEAGATE ST5660N 0518" type 0 fixed SCSI 2 sd0(aha0:0:0): Direct-Access 520MB (1065664 512 byte sectors) aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not found at 0x300 mcd0: timeout getting status mcd0 not found at 0x300 mcd1: timeout getting status mcd1 not found at 0x340 matcd0 not found at 0xffffffff scd0 not found at 0x230 ie0 not found at 0x360 ep0 not found at 0x300 ix0 not found at 0x300 le0: no board found at 0x300 le0 not found at 0x300 lnc0: disabled, not probed. lnc1 not found at 0x300 ze0 not probed due to maddr conflict with ed0 at 0xd8000 zp0 not probed due to maddr conflict with ed0 at 0xd8000 npx0 on motherboard npx0: INT 16 interface Probing for devices on the pci0 bus: configuration mode 1 allows 32 devices. pci0:5: vendor=0x1025, device=0x1435, class=bridge [not supported] changing root device to sd0a ed0: device timeout ed0: device timeout -- Dave Wilson Director, Computing Services, Rhodes University Phone: +27-461-318279 Grahamstown, South Africa Fax: +27-461-25049
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0sLplc-000CPXC>