Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 26 Nov 2022 16:08:58 -0800
From:      klu <kludev@gmail.com>
To:        FreeBSD Questions Mailing List <freebsd-questions@freebsd.org>
Subject:   Thinkpad T61 display won't wake from hibernate
Message-ID:  <CAEz5-Sx7cui2%2BdafyETtmMy4K8jcSdeYKpCZ2AW2LyxXXLsmmQ@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
I have FreeBsd 13.1 installed on a Thinkpad T61p laptop. I try to make
hibernate work so it can save power between uses.

If I type `sudo zzz`, it successfully goes to hibernate mode. When I
open the lid again, I can hear the computer is waking up. However the
screen does not come back. I can type blindly `sudo reboot`, which
will bring back the screen to show the shutting down messages.

I wonder what kind diagnostics I can do and how to fix this issue? Thanks!


root@t60:~ # cat /etc/rc.conf
hostname="t60"
wlans_wpi0="wlan0"
ifconfig_wlan0="WPA DHCP"
sshd_enable="YES"
ntpd_enable="YES"
powerd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="NO"
zfs_enable="YES"
linux_enable="YES"
kld_list="i915kms acpi_video"



root@t60:~ # cat /boot/loader.conf
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
cryptodev_load="YES"
zfs_load="YES"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
cryptodev_load="YES"
zfs_load="YES"
hw.vga.textmode=0
kern.vty=vt
acpi_ibm_load="YES"


root@t60:~ # kldstat
Id Refs Address                Size Name
 1   92 0xffffffff80200000  1f30470 kernel
 2    1 0xffffffff82131000     8710 acpi_ibm.ko
 3    1 0xffffffff8213a000     a158 cryptodev.ko
 4    1 0xffffffff82146000   5b93a8 zfs.ko
 5    1 0xffffffff82b20000   1848b8 i915kms.ko
 6    1 0xffffffff82ca5000    739e0 drm.ko
 7    2 0xffffffff82d19000     5220 linuxkpi_gplv2.ko
 8    3 0xffffffff82d1f000     62d8 dmabuf.ko
 9    1 0xffffffff82d26000     4350 acpi_video.ko
10    1 0xffffffff82d2b000     21e8 acpi_dock.ko
11    1 0xffffffff82d2e000     3250 ichsmb.ko
12    1 0xffffffff82d32000     2180 smbus.ko
13    1 0xffffffff82d35000     4d00 ng_ubt.ko
14    6 0xffffffff82d3a000     aac8 netgraph.ko
15    2 0xffffffff82d45000     a238 ng_hci.ko
16    4 0xffffffff82d50000     25a8 ng_bluetooth.ko
17    1 0xffffffff82d53000     e250 ng_l2cap.ko
18    1 0xffffffff82d62000    1bee8 ng_btsocket.ko
19    1 0xffffffff82d7e000     39c0 ng_socket.ko
20    1 0xffffffff82d82000    38070 linux.ko
21    4 0xffffffff82dbb000    10ab0 linux_common.ko
22    1 0xffffffff82dcc000    32208 linux64.ko
23    1 0xffffffff82dff000     2260 pty.ko
24    1 0xffffffff82e02000     3530 fdescfs.ko
25    1 0xffffffff82e06000     639c linprocfs.ko
26    1 0xffffffff82e0d000     3284 linsysfs.ko
27    1 0xffffffff82e11000     2a08 mac_ntpd.ko


root@t60:~ # dmesg | grep -i -e freebsd -e cpu -e ibm -e acpi -e power -e nvidia
Copyright (c) 1992-2021 The FreeBSD Project.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p3 GENERIC amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git
llvmorg-13.0.0-0-gd7b669b3a303)
CPU: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz (1995.07-MHz K8-class CPU)
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ACPI APIC Table: <LENOVO TP-7I   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block:
64/32 (20201113/tbfadt-748)
Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid
Address but zero Length: 0x000000000000102C/0x0 (20201113/tbfadt-796)
acpi0: <LENOVO TP-7I>
CPU0: local APIC error 0x40
CPU1: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib6
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <ThinkPad ACPI Extras> on acpi0
acpi_ibm0: Firmware version is 0x100
est0: <Enhanced SpeedStep Frequency Control> on cpu0
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 8 ports with 8 removable, self powered
acpi_video0: <ACPI video extension> on vgapci0
acpi_dock0: <ACPI Docking Station> on acpi0



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAEz5-Sx7cui2%2BdafyETtmMy4K8jcSdeYKpCZ2AW2LyxXXLsmmQ>