Date: Mon, 30 Jan 1995 19:27:08 -0600 (CST) From: Daniel Baker <dbaker@Starbase.NeoSoft.COM> To: hackers@FreeBSD.org Subject: Ferenhite Pro 64 -- X! Message-ID: <Pine.BSI.3.90.950130192617.26765A-100000@Starbase.NeoSoft.COM>
next in thread | raw e-mail | index | archive | help
[ Article crossposted from comp.os.386bsd.questions,comp.windows.x.i386bsd,hackers@freebsd.org,dbaker@concorde-mail.neosoft.com,dawes@physics.su.oz.au ]
[ Author was Daniel Baker ]
[ Posted on 30 Jan 1995 23:58:55 GMT ]
I have a Farenhite 64 Pro with 2 megs of Ram -- the PCI version. My
monitor is a Dell V1528U 15" . I am trying to get X Windows to run. It
isn't working. I've tried making my own Xf86config file, I have run
xf86config on FreeBSD 2, and asked Other Xers for help..
Here is my XF86Config file:
[COPYRIGHT SNIP]
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
RGBPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
ServerNumLock
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/psm0"
Emulate3Buttons
EndSection
Section "Monitor"
Identifier "VESA Standard Monitor"
VendorName "VESA"
ModelName "Standard Monitor"
BandWidth 135 MHz
HorizSync 30-58.5 kHz
VertRefresh 50-90 Hz
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
#Modeline "640x480" 28.322 640 680 720 864 480 488 491 521
#Modeline "640x480" 31.5 640 664 704 832 480 489 492 520
Modeline "800x600" 36 800 824 896 1024 600 601 603 625
#Modeline "800x600" 40 800 848 1000 1056 600 605 607 633
#Modeline "800x600" 50 800 856 976 1040 600 637 643 666
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806
#Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806
EndSection
Section "Device"
Identifier "Orchid Farenheit Pro64"
VendorName "Orchid"
BoardName "Farenheit Pro64"
ClockChip "s3_sdac"
RamDac "s3_sdac"
MemBase 0x80000000
# Option "power_saver"
EndSection
Section "Screen"
Driver "accel"
Device "Orchid Farenheit Pro64"
Monitor "VESA Standard Monitor"
Subsection "Display"
Modes "1024x768"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
#END OF FILE
Here is what happens when I run X:
XFree86 Version 3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: FreeBSD 2.0
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 3)
mmio_928, s3_generic
Using syscons driver with X support (version 1.3)
(using VT number 1)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/psm0, baudrate: 1200,
3 button emulation
(**) S3: Graphics device ID: "Orchid Farenheit Pro64"
(**) S3: Monitor ID: "VESA Standard Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) S3: card type: PCI
(--) S3: chipset: 964 rev. 0
(--) S3: chipset driver: mmio_928
(--) S3: videoram: 2048k
(--) S3: Ramdac type: normal
(--) S3: Ramdac speed: 110
(**) S3: Using S3 Gendac/SDAC programmable clock
(--) S3: Maximum allowed dot-clock: 110.000 MHz
(**) S3: Mode "1024x768": mode clock = 65.000
(--) S3: Using 6 bits per RGB value
(**) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xF3000000
(--) S3: Using a banksize of 2048k, line width of 1024
(--) S3: Using a single 64x64 area for expanding pixmaps
(--) S3: Using 8 planes of 960x1279 at (0,769) aligned 8 as font cache
MIT-SHM extension disabled due to lack of kernel support
Any Ideas?
Thanks in advance,
Daniel Baker
--
Daniel Baker -- NeoSoft FTP/UseNet Administrator (713)531-8571
DBaker@NeoSoft.COM
DBaker@Concorde-Mail.NeoSoft.COM
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.90.950130192617.26765A-100000>