Date: Fri, 06 Feb 1998 10:26:02 -0500 (EST) From: Jeff Wheat <jeff@cetlink.net> To: freebsd-questions@FreeBSD.ORG Subject: Adaptec 1542 drivers busted?? Message-ID: <XFMail.980206103437.jeff@cetlink.net>
next in thread | raw e-mail | index | archive | help
Looks like once again NetBSD/OpenBSD have functional drivers:
Feb 6 10:23:26 johnnybravo /kernel: aha0: DMA beyond end Of ISA: 0x262bd24
Feb 6 10:23:26 johnnybravo /kernel: ch0: could not sense element address page
Both current releases of NetBSD and OpenBSD work without errors. This is
from a 3.0-19971225-SNAP system. BOUNCE_BUFFERS are included in the kernel.
I have observed this in 2.1, 2.2, 2.2.1, 2.2.5 and now 3.0. Is this device
dropped from development or is there plans to fix this problem? I am sure I
am not the only one to have seen this.
Config:
FreeBSD 3.0-971225-SNAP #1: Thu Feb 5 16:00:25 EST 1998
root@johnnybravo.cetlink.net:/usr/src/sys/compile/JB
CPU: AMD Enhanced Am486DX4 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x494 Stepping=4
Features=0x1<FPU>
real memory = 67108864 (65536K bytes)
avail memory = 62820352 (61348K bytes)
Probing for devices on PCI bus 0:
chip0: <SiS 85c496> rev 0x31 on pci0.5.0
vga0: <Trident model 9440 VGA-compatible display device> rev 0xe3 int a irq 0 on
pci0.15.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x360-0x37f irq 5 on isa
ed0: address 00:80:1e:01:23:3d, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0 not probed due to I/O address conflict with ed0 at 0x378
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC2700F>
wd0: 696MB (1427328 sectors), 1416 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <WDC AC21200H>
wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0: waiting for scsi devices to settle
scbus0 at aha0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <SEAGATE ST12550N 0014> type 0 fixed SCSI 2
sd0: Direct-Access 2040MB (4178874 512 byte sectors)
st0 at scbus0 target 4 lun 0
st0: <ARCHIVE Python 28849-XXX 4.CM> type 1 removable SCSI 2
st0: Sequential-Access density code 0x13, 512-byte blocks, write-enabled
ch0 at scbus0 target 4 lun 1
ch0: <ARCHIVE Python 28849-XXX 4.CM> type 8 removable SCSI 2
ch0: Medium-Changer 0 slot, 1 drive, 1 picker
aic0 not found at 0x340
npx0 on motherboard
npx0: INT 16 interface
Jeff
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.980206103437.jeff>