Date: Tue, 13 Jan 2004 17:53:52 -0500 From: Jesse Guardiani <jesse@wingnet.net> To: freebsd-mobile@freebsd.org Subject: Re: Subset of power patch: subtractive decoding Message-ID: <bu1su1$roh$1@sea.gmane.org> References: <20040110.172705.107216603.imp__30021.5326635682$1073780875@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
M. Warner Losh wrote: > I've teased out the subtractive bridge decoding patches from the > larger power patches. Please test them and let me know how things > go. This eliminates hw.pci.allow_unsupported_io_range by fixing the > underlying problem this was kludging around. Please test it and let > me know how it is working for you. It should only make things better, > and make nothing worse. > > This won't fix the other problems that the more complete power patches > attempt to fix. > > http://people.freebsd.org/~imp/pci-subtractive.diff > > Warner > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" Well, on my IBM A30p this patch mostly works. However, if I try to boot with my pcmcia 56k 3Com Megahertz 3CXM756 installed the machine hangs. In fact, if I insert the card after a successfull boot the machine hangs, but removing the card immediately fixes the hang. Here's the message it prints before it hangs: pcib2: device pccard0 requested decoded memory range 0xc0200000-0xcfffffff And here's my verbose dmesg.boot: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC1 #1: Tue Jan 13 17:06:09 EST 2004 jesse@trevarthan.int.wingnet.net:/usr/src/sys/i386/compile/TREVARTHAN Preloaded elf kernel "/boot/kernel/kernel" at 0xc086c000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc086c278. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc086c324. Preloaded elf module "/boot/kernel/apm.ko" at 0xc086c3d0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc086c478. Calibrating clock(s) ... i8254 clock: 1193165 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1198987285 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1198.99-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 402063360 (383 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000001788bfff, 382099456 bytes (93286 pages) avail memory = 380850176 (363 MB) bios32: Found BIOS32 Service Directory header at 0xc00f7420 bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd770+0x18e pnpbios: Found PnP BIOS data at 0xc00f7480 pnpbios: Entry = f0000:a15c Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: Other PM system enabled. pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00fdeb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3575, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3576, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pci_cfgintr_valid: BIOS irq 9 is valid pci_cfgintr: 0:29 INTA BIOS irq 9 found-> vendor=0x8086, dev=0x2482, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[20]: type 4, range 32, base 00001820, size 5, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:29 INTB BIOS irq 11 found-> vendor=0x8086, dev=0x2484, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pci_cfgintr_valid: BIOS irq 9 is valid pci_cfgintr: 0:29 INTC BIOS irq 9 found-> vendor=0x8086, dev=0x2487, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 found-> vendor=0x8086, dev=0x2448, revid=0x41 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=0x8086, dev=0x248a, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 0:31 INTB BIOS irq 5 found-> vendor=0x8086, dev=0x2483, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 000018c0, size 6, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 0:31 INTB BIOS irq 5 found-> vendor=0x8086, dev=0x2485, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 4, range 32, base 00002000, size 7, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 0:31 INTB BIOS irq 5 found-> vendor=0x8086, dev=0x2486, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 228M pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base c0100000, size 16, enabled pci_cfgintr_valid: BIOS irq 9 is valid pci_cfgintr: 1:0 INTA BIOS irq 9 found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xf00fffff pcib2: Subtractively decoded bridge. pci2: <PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base 50000000, size 12, enabled pci_cfgintr_valid: BIOS irq 9 is valid pci_cfgintr: 2:0 INTA BIOS irq 9 found-> vendor=0x1180, dev=0x0478, revid=0xa0 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 50100000, size 12, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 2:0 INTB BIOS irq 5 found-> vendor=0x1180, dev=0x0478, revid=0xa0 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0201000, size 11, enabled pci_cfgintr_valid: BIOS irq 9 is valid pci_cfgintr: 2:0 INTC BIOS irq 9 found-> vendor=0x1180, dev=0x0522, revid=0x00 bus=2, slot=0, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=c, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type 3, range 32, base f0000000, size 12, enabled pci_cfgintr_valid: BIOS irq 9 is valid pci_cfgintr: 2:2 INTA BIOS irq 9 found-> vendor=0x1260, dev=0x3873, revid=0x01 bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0200000, size 12, enabled map[14]: type 4, range 32, base 00008000, size 6, enabled pci_cfgintr_valid: BIOS irq 10 is valid pci_cfgintr: 2:8 INTA BIOS irq 10 found-> vendor=0x8086, dev=0x1031, revid=0x41 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: <RF5C478 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 9 at device 0.0 on pci2 pcib2: device cbb0 requested decoded memory range 0x50000000-0x50000fff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04781180 0x02100107 0x060700a0 0x00824000 0x10: 0x50000000 0x020000dc 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000109 0x40: 0x01841014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04800001 0x00000000 0x04630464 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x000a0000 0x00000000 0x00f00000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x01841014 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <RF5C478 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 5 at device 0.1 on pci2 pcib2: device cbb1 requested decoded memory range 0x50100000-0x50100fff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x04781180 0x02100107 0x060700a0 0x00824000 0x10: 0x50100000 0x020000dc 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000205 0x40: 0x01841014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04800001 0x00000000 0x04630464 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x000a0000 0x00000000 0x00f00000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x01841014 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci2: <serial bus, FireWire> at device 0.2 (no driver attached) wi0: <Intersil Prism2.5> mem 0xf0000000-0xf0000fff irq 9 at device 2.0 on pci2 pcib2: device wi0 requested decoded memory range 0xf0000000-0xf0000fff wi0: 802.11 address: 00:20:e0:8a:90:61 wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2 pcib2: device fxp0 requested decoded memory range 0xc0200000-0xc0200fff fxp0: using memory space register mapping fxp0: Ethernet address 00:d0:59:aa:70:ec fxp0: PCI IDs: 8086 1031 1014 0209 0041 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 5 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at device 31.5 on pci0 pcm0: <Cirrus Logic CS4299 AC97 Codec (id = 0x43525936)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP pcm0: sndbuf_setmap 2c1000, 4000; 0xe38ed000 -> 2c1000 pcm0: sndbuf_setmap 2c5000, 4000; 0xe38f1000 -> 2c5000 pci0: <simple comms> at device 31.6 (no driver attached) eisa0: <EISA bus> on motherboard eisa0: unknown card @H@0000 (0x01000000) at slot 1 pnpbios: 23 devices, largest 238 bytes PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1 PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1 PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1 PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1 PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1 PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1 PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1 PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1 PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1 PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1 PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1 PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1 PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1 PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1 PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1 PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1 PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0x8 PNP0c02: adding io range 0x1600-0x167f, size=0x80, align=0x8 PNP0c02: adding fixed memory32 range 0xffc00000-0xffffffff, size=0x400000 pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x17ffffff, size=0x17f00000 pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 5 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 6 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 9 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1 PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1 PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1 pnpbios: handle 11 device ID PNP0c02 (020cd041) INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000 INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000 INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000 INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000 INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000 INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff000000-0xff07ffff, size=0x80000 pnpbios: handle 12 device ID INT0800 (0008d425) PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000 pnpbios: handle 13 device ID PNP0c02 (020cd041) pnpbios: handle 14 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xd2000-0xd3fff, size=0x2000 pnpbios: handle 15 device ID PNP0c02 (020cd041) PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0x1 PNP0680: adding io range 0x3f6-0x3f6, size=0x1, align=0x1 PNP0680: adding irq mask 0x4000 PNP0680: adding io range 0x1860-0x1867, size=0x8, align=0x1 pnpbios: handle 16 device ID PNP0680 (8006d041) PNP0680: adding io range 0x170-0x177, size=0x8, align=0x1 PNP0680: adding io range 0x376-0x376, size=0x1, align=0x1 PNP0680: adding irq mask 0x8000 PNP0680: adding io range 0x1868-0x186f, size=0x8, align=0x1 pnpbios: handle 17 device ID PNP0680 (8006d041) IBM3780: adding irq mask 0x1000 pnpbios: handle 18 device ID IBM3780 (80374d24) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 19 device ID PNP0501 (0105d041) IBM0071: adding dma mask 0x8 IBM0071: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 IBM0071: adding irq mask 0x8 pnpbios: handle 20 device ID IBM0071 (71004d24) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 21 device ID PNP0700 (0007d041) PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0x4 PNP0400: adding irq mask 0x80 pnpbios: handle 23 device ID PNP0400 (0004d041) pnpbios: handle 26 device ID PNP0e03 (030ed041) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 0f c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 0f c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x3bc ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <INT0800> failed to probe at iomem 0xff000000-0xff07ffff,0xff800000-0xff87ffff,0xff880000-0xff8fffff,0xff900000-0xff97ffff,0xff980000-0xff9fffff,0xffa00000-0xffa7ffff,0xffa80000-0xffafffff,0xffb00000-0xffb7ffff,0xffb80000-0xffbfffff on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0c02> at iomem 0xdc000-0xdffff on isa0 unknown: <PNP0680> can't assign resources (port) unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0 unknown: <PNP0680> can't assign resources (port) unknown: <PNP0680> at port 0x170-0x177 on isa0 unknown: <IBM3780> can't assign resources (irq) unknown: <IBM3780> at irq 12 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <IBM0071> can't assign resources (port) unknown: <IBM0071> at port 0x2f8-0x2ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 ppc1: using normal I/O port range ppc1: SPP ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0e03> failed to probe on isa0 Device configuration finished. procfs registered TSC timecounter disabled: APM enabled. Timecounter "TSC" frequency 1198987285 Hz quality -1000 Timecounters tick every 10.000 msec lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x01 ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH3 chip ata0-master: setting UDMA100 on Intel ICH3 chip GEOM: create disk ad0 dp=0xc3b6a960 ad0: <IC25T048ATDA05-0/DA8OA76A> ATA-5 disk at ata0-master ad0: 45780MB (93759120 sectors), 93015 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/134/63 s:63 l:21455217 [1] f:00 typ:28 s(CHS):1023/255/63 e(CHS):1023/59/63 s:91098000 l:2661120 [2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:21455280 l:69633270 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 10985071104 end 10985103359 GEOM: Configure ad0s2, start 46642176000 length 1362493440 end 48004669439 GEOM: Configure ad0s3, start 10985103360 length 35652234240 end 46637337599 GEOM: Configure ad0s3a, start 0 length 314572800 end 314572799 GEOM: Configure ad0s3b, start 314572800 length 1073741824 end 1388314623 GEOM: Configure ad0s3c, start 0 length 35652234240 end 35652234239 GEOM: Configure ad0s3d, start 1388314624 length 8589934592 end 9978249215 GEOM: Configure ad0s3e, start 9978249216 length 1073741824 end 11051991039 GEOM: Configure ad0s3f, start 11051991040 length 24600243200 end 35652234239 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH3 chip ata1-master: setting UDMA33 on Intel ICH3 chip acd0: <HL-DT-STDVD-ROM GDR8081N/0011> DVDROM drive at ata1 as master acd0: read 1722KB/s (4134KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered -- Jesse Guardiani, Systems Administrator WingNET Internet Services, P.O. Box 2605 // Cleveland, TN 37320-2605 423-559-LINK (v) 423-559-5145 (f) http://www.wingnet.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bu1su1$roh$1>