From owner-freebsd-questions Wed Jun 27 12:51:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kheops.demo.telefonica.com.pe (kheops.demo.telefonica.com.pe [200.37.84.130]) by hub.freebsd.org (Postfix) with ESMTP id 89A9437B407 for ; Wed, 27 Jun 2001 12:51:31 -0700 (PDT) (envelope-from rcc@demo.telefonica.com.pe) Received: from elcsa20008 (khephren.demo.telefonica.com.pe [200.37.84.131]) by kheops.demo.telefonica.com.pe (8.11.0/8.11.0) with SMTP id f5RF6Gt15245; Wed, 27 Jun 2001 10:06:16 -0500 (PET) Message-ID: <00ca01c0ff17$d53a6ac0$4d01190a@tp.com.pe> From: "Richard Cotrina" To: "SD" Cc: References: <000a01c0fdb4$3825b5f0$2506ff3e@zen> <01062520091901.00512@mark9.vladsempire.net> Subject: RE: Cant get Adaptec 1520 SCSI (ISA Bus) to work in 4.3 Date: Wed, 27 Jun 2001 09:45:38 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi : It's the same problem I had. Those cards only works if they have the AIC 6360 ROM. Otherwise, they are not recognized under FreeBSD 4.x. That card was perfectly supported until FreeBSD 3.4-RELEASE, but since the change to the FreeBSD 4 it had some troubles. AFAIK, this problem have been corrected under FreeBSD 5-CURRENT. Good Luck. ----- Original Message ----- From: Josh Paetzel To: SD ; Sent: Monday, June 25, 2001 8:09 PM Subject: Re: Cant get Adaptec 1520 SCSI (ISA Bus) to work in 4.3 > On Monday 25 June 2001 15:20, SD wrote: > > I bought an Adaptec ISA 1520 SCSI controller ('new' - box unopened) - > > > > mainly as I believed that it was pretty much 'Industry Standard' and > > > > would thus work well with all my OS's... ;-) > > > > BSD 4.3 Release isnt happy .. > > > > I have recompiled with 'aic' present in the kernel and after RTFM made > > > > sure that all that else that *seemed* to be required was also enabled. > > > > On reboot dmesg reports: > > > > isa0 - too many dependant configs (8) > > > > at the point of probing the controller. > > > > Has anyone got one of these to work with 4.3? > > > > Surely it must be one of the most ordinary / poular ISA SCSI cards ever > > > > - so it cant be too much of a prob? ;-) > > Have you made sure that the jumpers are set to the resources that the driver > is expecting the card to use? The driver really seems to want the card to > be on irq 11 and I/O address 0x0140. Most likely you are having some sort of > conflict in your system with irq 11. > > I dug one of those up from the back room and checked it out on a 4.3-STABLE > machine from last weekend. It seemed to work just fine. > > Josh > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message