Date: Wed, 4 Oct 2006 12:44:16 +0200 From: Anders Nordby <anders@FreeBSD.org> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-acpi@freebsd.org, freebsd-smp@freebsd.org Subject: Re: Compaq DL 360 SMP problem (was: i386/89545: Compaq DL 360 ACPI boot problem) Message-ID: <20061004104415.GB23653@fupp.net> In-Reply-To: <200601060753.18180.jhb@freebsd.org> References: <200601052220.k05MK78w044322@freefall.freebsd.org> <200601060753.18180.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--TB36FDmn/VVEgNH/ Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit Hi, And old mail here, but I still have this problem getting SMP to work on the machine. On Fri, Jan 06, 2006 at 07:53:17AM -0500, John Baldwin wrote: >> How can I get SMP running? This worked in 5.x and 4.x, I believe. > 2) Re: SMP, just to make sure, do you have 'device apic' and 'options SMP' in > your kernel? Also, can you provide the output of 'acpidump -t' so I can see > what your APIC table (MADT) looks like. Also, does the kernel find SMP if > you disable ACPI? Yes, apic is enabled in the kernel that I run. ACPI is loaded as a kernel module. If I disable ACPI, FreeBSD also finds only one processor. I still use the custom dsdt as modified after getting instructions by you in this PR http://www.freebsd.org/cgi/query-pr.cgi?pr=89545. The modifications are: --- vm.asl Sat Jan 7 12:06:14 2006 +++ vm-fixed.asl Sat Jan 7 12:08:04 2006 @@ -5,13 +5,13 @@ /* RSDT: Length=52, Revision=1, Checksum=69, OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2, - Creator ID=Ò, Creator Revision=0x162e + Creator ID=ASL Creator Revision=0x162e Entries={ 0x67ffc040, 0x67ffc100, 0x67fff800, 0x67ffc180 } */ /* FACP: Length=116, Revision=1, Checksum=110, OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2, - Creator ID=Ò, Creator Revision=0x162e + Creator ID=ASL Creator Revision=0x162e FACS=0x67ffc0c0, DSDT=0x67ffc200 INT_MODEL=APIC Preferred_PM_Profile=Unspecified (0) @@ -84,7 +84,7 @@ /* SPCR: Length=80, Revision=1, Checksum=14, OEMID=COMPAQ, OEM Table ID=SPCR_ROM, OEM Revision=0x1, - Creator ID=Ò, Creator Revision=0x162e + Creator ID=ASL Creator Revision=0x162e */ /* * Intel ACPI Component Architecture @@ -1573,7 +1573,7 @@ Else { Store ("PCI0._PRT in PIC mode", Debug) - Return (Package (0x08) + Return (Package (0x07) { Package (0x04) { @@ -1588,14 +1588,6 @@ 0x0001FFFF, 0x01, ITR2, - 0x00 - }, - - Package (0x04) - { - 0x0004FFFF, - 0x00, - FAKE, 0x00 }, I'm running 6.1 on the system now, but still FreeBSD sees only one CPU. When booting the system it lists two: Processor 1 initialized at 800/133 MHz with 256 Kbyte Cache Processor 2 initialized at 800/133 MHz with 256 Kbyte Cache If I try to run with acpi but without the modified dsdt, I get these pci/cpu/apic/acpi messages on boot: CPU: Intel Pentium III (797.48-MHz 686-class CPU) acpi0: <COMPAQ MICRO> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci_link0: apparently invalid index 0 pci0: <ACPI PCI bus> on pcib0 ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0 pci0: <display, VGA> at device 3.0 (no driver attached) pci0: <base peripheral> at device 4.0 (no driver attached) pcib1: <PCI-PCI bridge> at device 5.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <memory> at device 5.1 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib2: <ACPI Host-PCI bridge> on acpi0 pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid pci3: <ACPI PCI bus> on pcib2 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3 fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3 ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem 0xc6bff000-0xc6bfffff irq 9 at device 6.0 on pci3 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 With the custom dsdt, I get: CPU: Intel Pentium III (797.48-MHz 686-class CPU) ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI: overriding DSDT/SSDT with custom table ACPI-0377: *** Info: Table [DSDT] replaced by host OS acpi0: <COMPAQ MICRO> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0 pci0: <display, VGA> at device 3.0 (no driver attached) pci0: <base peripheral> at device 4.0 (no driver attached) pcib1: <PCI-PCI bridge> at device 5.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <memory> at device 5.1 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x17 7,0x376,0x2800-0x280f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib2: <ACPI Host-PCI bridge> on acpi0 pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid pci3: <ACPI PCI bus> on pcib2 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem 0xc6fff000-0xc6fffff f,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3 fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem 0xc6dff000-0xc6dffff f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3 ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem 0xc6bff000-0xc 6bfffff irq 9 at device 6.0 on pci3 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 If I run without ACPI, I get: CPU: Intel Pentium III (797.48-MHz 686-class CPU) cpu0 on motherboard pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0 pci0: <display, VGA> at device 3.0 (no driver attached) pci0: <base peripheral> at device 4.0 (no driver attached) pcib1: <PCI-PCI bridge> at device 5.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <memory> at device 5.1 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x17 7,0x376,0x2800-0x280f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 3 on motherboard pci3: <PCI bus> on pcib3 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem 0xc6fff000-0xc6fffff f,0xc6e00000-0xc6efffff irq 7 at device 4.0 on pci3 fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem 0xc6dff000-0xc6dffff f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3 ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem 0xc6bff000-0xc 6bfffff irq 3 at device 6.0 on pci3 In any case, I only get one CPU. How to fix? Acpidump attached. Bye, -- Anders. --TB36FDmn/VVEgNH/ Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="acpidump.txt" Content-Transfer-Encoding: quoted-printable /* RSD PTR: OEM=3DCOMPAQ, ACPI_Rev=3D1.0x (0) RSDT=3D0x67ffc000, cksum=3D250 */ /* RSDT: Length=3D52, Revision=3D1, Checksum=3D69, OEMID=3DCOMPAQ, OEM Table ID=3DMICRO, OEM Revision=3D0x2, Creator ID=3D=D2=04, Creator Revision=3D0x162e Entries=3D{ 0x67ffc040, 0x67ffc100, 0x67fff800, 0x67ffc180 } */ /* FACP: Length=3D116, Revision=3D1, Checksum=3D110, OEMID=3DCOMPAQ, OEM Table ID=3DMICRO, OEM Revision=3D0x2, Creator ID=3D=D2=04, Creator Revision=3D0x162e FACS=3D0x67ffc0c0, DSDT=3D0x67ffc200 INT_MODEL=3DAPIC Preferred_PM_Profile=3DUnspecified (0) SCI_INT=3D9 SMI_CMD=3D0x230, ACPI_ENABLE=3D0x1, ACPI_DISABLE=3D0x0, S4BIOS_REQ=3D0x0 PSTATE_CNT=3D0x0 PM1a_EVT_BLK=3D0x220-0x223 PM1a_CNT_BLK=3D0x230-0x231 PM_TMR_BLK=3D0x240-0x243 P_LVL2_LAT=3D65535 us, P_LVL3_LAT=3D65535 us FLUSH_SIZE=3D0, FLUSH_STRIDE=3D0 DUTY_OFFSET=3D0, DUTY_WIDTH=3D0 DAY_ALRM=3D0, MON_ALRM=3D0, CENTURY=3D0 IAPC_BOOT_ARCH=3D Flags=3D{WBINVD,PROC_C1,SLP_BUTTON,FIX_RTC} */ /* FACS: Length=3D64, HwSig=3D0x0000abcd, Firm_Wake_Vec=3D0x00000000 Global_Lock=3D Flags=3D Version=3D0 */ /* DSDT: Length=3D8075, Revision=3D1, Checksum=3D89, OEMID=3DCOMPAQ, OEM Table ID=3DDSDT, OEM Revision=3D0x1, Creator ID=3DMSFT, Creator Revision=3D0x100000b */ /* APIC: Length=3D94, Revision=3D1, Checksum=3D76, OEMID=3DCOMPAQ, OEM Table ID=3D00000083, OEM Revision=3D0x2, Creator ID=3D, Creator Revision=3D0x0 Local APIC ADDR=3D0xfee00000 Flags=3D{PC-AT} Type=3DLocal APIC ACPI CPU=3D0 Flags=3D{ENABLED} APIC ID=3D0 Type=3DLocal APIC ACPI CPU=3D1 Flags=3D{DISABLED} APIC ID=3D1 Type=3DLocal APIC ACPI CPU=3D2 Flags=3D{DISABLED} APIC ID=3D2 Type=3DLocal APIC ACPI CPU=3D3 Flags=3D{ENABLED} APIC ID=3D3 Type=3DIO APIC APIC ID=3D8 INT BASE=3D0 ADDR=3D0x00000000fec00000 Type=3DLocal NMI ACPI CPU=3DALL LINT Pin=3D1 Flags=3D{Polarity=3Dconforming, Trigger=3Dconforming} */ /* SSDT: Length=3D546, Revision=3D1, Checksum=3D240, OEMID=3DCOMPAQ, OEM Table ID=3DSSDT, OEM Revision=3D0x1, Creator ID=3DMSFT, Creator Revision=3D0x100000b */ /* SPCR: Length=3D80, Revision=3D1, Checksum=3D14, OEMID=3DCOMPAQ, OEM Table ID=3DSPCR_ROM, OEM Revision=3D0x1, Creator ID=3D=D2=04, Creator Revision=3D0x162e */ --TB36FDmn/VVEgNH/--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061004104415.GB23653>