Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 29 Nov 1998 22:41:52 +0100
From:      Eivind Eklund <eivind@yes.no>
To:        Gary Jennejohn <garyj@muc.de>
Cc:        Jon Johansen <digitech@mmadb.no>, freebsd-isdn@FreeBSD.ORG
Subject:   Re: Which port to use with isdn card?
Message-ID:  <19981129224152.C9226@follo.net>
In-Reply-To: <199811292055.VAA04074@peedub.muc.de>; from Gary Jennejohn on Sun, Nov 29, 1998 at 09:55:55PM %2B0100
References:  <19981129213328.A9226@follo.net> <199811292055.VAA04074@peedub.muc.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Nov 29, 1998 at 09:55:55PM +0100, Gary Jennejohn wrote:
> Eivind Eklund writes:
> >On Sun, Nov 29, 1998 at 04:41:45PM +0100, Jon Johansen wrote:
> >> Probing for PnP devices:
> >> CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x0d6d8df3 Comp ID: PNPb02f
> >> [0x2fb0d041]
> >> CSN 2 Vendor ID: ASU1688 [0x88167506] Serial 0x00000044 Comp ID: @@@0000
> >> [0x00000000]
> >> CSN 2 is disabled. (Dynalink PNP probe)
> >
> >I don't believe this card is supported.  If you drop by me with the
> >card one evening, I'll try to add support for it.  This is likely to
> >take between 1/2 and 2 hours (iff it is based on the ISAC/HSCX
> >combination).  Contact me off-list for an address (Oslo-area).
> >
> 
> There's a comment in the driver to the effect that it may work with the
> Asuscom card. The info reproduced above is exactlty what the driver author
> lists for his card.
> 
> He might have better luck with the newer version (if he could get it :)
> since Hellmuth did some work on the PnP support.

It looks like the card is attempted supported, at least.  I didn't
read through what Hellmuth had done with the PnP code after I
submitted it - it appears he has added support for a bunch more cards.
However, unless the developers version has been tested with the card
in PnP mode, I would be vary of expecting it to work.  If the pnpinfo
output Jon sent was correct (ie, included the complete information
from his ISDN card - and I'm not sure his pruning was correct) then it
will almost certainly _not_ work.

> The Comp ID looks fubar.

Agreed.

Eivind.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981129224152.C9226>