Date: Thu, 29 Aug 2002 03:23:09 +0100 (BST) From: Steve Parker <steve.parker@netops.co.uk> To: freebsd-questions@FreeBSD.ORG Subject: AJP 8500C Laptop Message-ID: <Pine.GSO.4.44.0208290307320.2129-100000@www>
next in thread | raw e-mail | index | archive | help
Hi,
I'm trying to install FreeBSD4.6.2 on an AJP (aka Kapok) 8500C laptop. I
get this problem even with no PCMCIA cards inserted (though I'll need my
3COM 3c59x card to install over FTP!)...
I'm new to *BSD, though I've got a decent background in Solaris and Linux,
and I'd really like to get this installed....
I boot from the kern.flp floppy, then the mfsroot.flp floppy. I get 7
conflicts - these seem to be a bunch of ethernet cards I don't have, all
on IRQ10, and a PCMCIA controller I do have, also on IRQ10.
By deleting the unused NICs, I can start booting off the mfsroot RAMdisk
image, but it almost immediately PANICs.
As I only get 15 seconds to read the PANIC before it reboots, all I can
say is that it's just after it's loaded the power management module.
The machine is currently running Linux, so I can give the configuration of
the machine, as reported by Linux. Any ideas what may be causing the
problem, and if I can do anything about it?
Hardware configuration is:
64Mb Intel Celeron 433MHz, ATI Mach64 (3D Rage LT Pro AGP-133), 3COM 3c59x
NIC, single 6GB IDE HDD, single IDE CD-ROM, single 1.44MB floppy, that's
about it...
Linux# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
3).
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xa0000000 [0xa3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
3).
Master Capable. No bursts. Min Gnt=136.
Bus 0, device 7, function 0:
Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0x1100 [0x110f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 10.
Master Capable. Latency=240.
I/O at 0xf300 [0xf31f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 10, function 0:
CardBus bridge: Texas Instruments PCI1225 (rev 1).
IRQ 10.
Master Capable. Latency=168. Max Lat=5.
Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
Bus 0, device 10, function 1:
CardBus bridge: Texas Instruments PCI1225 (#2) (rev 1).
IRQ 10.
Master Capable. Latency=168. Min Gnt=192.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff].
Bus 0, device 13, function 0:
FireWire (IEEE 1394): Texas Instruments OHCI Compliant FireWire
Controller (rev 1).
Master Capable. No bursts. Min Gnt=3.Max Lat=4.
Non-prefetchable 32 bit memory at 0x10002000 [0x100027ff].
Non-prefetchable 32 bit memory at 0x10004000 [0x10007fff].
Bus 0, device 16, function 0:
Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev
16).
IRQ 5.
Master Capable. Latency=128. Min Gnt=2.Max Lat=24.
I/O at 0x3100 [0x31ff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133
(rev 220).
IRQ 11.
Master Capable. No bursts. Min Gnt=8.
Non-prefetchable 32 bit memory at 0xd8000000 [0xd8ffffff].
I/O at 0x8000 [0x80ff].
Non-prefetchable 32 bit memory at 0xd9000000 [0xd9000fff].
Bus 2, device 0, function 0:
Ethernet controller: PCI device 10b7:5157 (rev 1).
IRQ 10.
Master Capable. Latency=64. Min Gnt=10.Max Lat=5.
I/O at 0x1800 [0x187f].
Non-prefetchable 32 bit memory at 0x10800000 [0x1080007f].
Non-prefetchable 32 bit memory at 0x10800080 [0x108000ff].
Linux# cat /proc/interrupts
CPU0
0: 67277 XT-PIC timer
1: 25 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
10: 891 XT-PIC usb-uhci, Texas Instruments PCI1225,
Texas Instruments PCI1225 (#2), eth0
12: 0 XT-PIC PS/2 Mouse
14: 6079 XT-PIC ide0
15: 10 XT-PIC ide1
NMI: 0
ERR: 114
Linux# cat /proc/apm
1.14 1.2 0x03 0x01 0xff 0xff -1% -1 ?
Linux# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 433.346
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 865.07
Linux# cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
29 fb
36 netlink
108 ppp
128 ptm
129 ptm
130 ptm
131 ptm
132 ptm
133 ptm
134 ptm
135 ptm
136 pts
137 pts
138 pts
139 pts
140 pts
141 pts
142 pts
143 pts
162 raw
180 usb
254 pcmcia
Block devices:
1 ramdisk
2 fd
3 ide0
9 md
22 ide1
Linux# cat /proc/iomem
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03ffffff : System RAM
00100000-0023c967 : Kernel code
0023c968-0025354b : Kernel data
10000000-10000fff : Texas Instruments PCI1225
10001000-10001fff : Texas Instruments PCI1225 (#2)
10002000-100027ff : Texas Instruments OHCI Compliant FireWire Controller
10004000-10007fff : Texas Instruments OHCI Compliant FireWire Controller
10400000-107fffff : PCI CardBus #02
10400000-1041ffff : PCI device 10b7:5157
10800000-10bfffff : PCI CardBus #02
10800000-1080007f : PCI device 10b7:5157
10800080-108000ff : PCI device 10b7:5157
10c00000-10ffffff : PCI CardBus #06
11000000-113fffff : PCI CardBus #06
a0000000-a3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
d0000000-d7ffffff : PCI Bus #01
d8000000-dfffffff : PCI Bus #01
d8000000-d8ffffff : ATI Technologies Inc 3D Rage LT Pro AGP-133
d9000000-d9000fff : ATI Technologies Inc 3D Rage LT Pro AGP-133
Linux# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-103f : Intel Corporation 82371AB PIIX4 ACPI
1100-110f : Intel Corporation 82371AB PIIX4 IDE
1100-1107 : ide0
1108-110f : ide1
1400-141f : Intel Corporation 82371AB PIIX4 ACPI
1800-18ff : PCI CardBus #02
1800-187f : PCI device 10b7:5157
1800-187f : 02:00.0
1c00-1cff : PCI CardBus #02
2000-20ff : PCI CardBus #06
2400-24ff : PCI CardBus #06
3100-31ff : ESS Technology ES1978 Maestro 2E
8000-9fff : PCI Bus #01
8000-80ff : ATI Technologies Inc 3D Rage LT Pro AGP-133
f300-f31f : Intel Corporation 82371AB PIIX4 USB
f300-f31f : usb-uhci
Linux# cat /proc/interrupts
CPU0
0: 75772 XT-PIC timer
1: 25 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
10: 1862 XT-PIC usb-uhci, Texas Instruments PCI1225, Texas Instruments PCI1225 (#2), eth0
12: 0 XT-PIC PS/2 Mouse
14: 6120 XT-PIC ide0
15: 21 XT-PIC ide1
NMI: 0
ERR: 216
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.44.0208290307320.2129-100000>