From owner-freebsd-smp Thu Jan 3 9:23:24 2002 Delivered-To: freebsd-smp@freebsd.org Received: from elvis.mu.org (elvis.mu.org [216.33.66.196]) by hub.freebsd.org (Postfix) with ESMTP id A27C837B405; Thu, 3 Jan 2002 09:23:11 -0800 (PST) Received: by elvis.mu.org (Postfix, from userid 1192) id 2F93B81D03; Thu, 3 Jan 2002 11:23:06 -0600 (CST) Date: Thu, 3 Jan 2002 11:23:06 -0600 From: Alfred Perlstein To: John Baldwin Cc: smp@freebsd.org Subject: Re: smp hang on -current? Message-ID: <20020103112306.D82406@elvis.mu.org> References: <20020102054324.W16101@elvis.mu.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from jhb@FreeBSD.org on Wed, Jan 02, 2002 at 09:53:07AM -0800 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org * John Baldwin [020102 11:53] wrote: > > On 02-Jan-02 Alfred Perlstein wrote: > > * Alfred Perlstein [020102 05:37] wrote: > >> I have a box, I've enabled SMP, and APIC, disabled WITNESS and > >> INVARIANTS. It hangs after probing scsi right before > >> mountroot. It looks like something may be botched with interrupts: > > > > I'll have info tomorrow and any suggestions for providing that > > info would be followed. > > Rest of the dmesg might be nice. :) This is mptable+dmesg from the kernel that boots. =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000ff780 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0xd4 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f0db0 signature: 'PCMP' base table length: 276 version: 1.4 checksum: 0x8f OEM ID: 'AMI ' Product ID: 'CNB30LE ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 26 local APIC address: 0xfee00000 extended table length: 200 extended table checksum: 43 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 8 6 0x387fbff 1 0x11 AP, usable 6 8 6 0x387fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 4 0x11 usable 0xfec00000 5 0x11 usable 0xfec01000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 0 1:A 5 6 INT active-lo level 1 6:B 5 12 INT active-lo level 0 4:A 5 4 INT active-lo level 0 5:A 5 5 INT active-lo level 0 15:A 4 10 INT active-lo level 1 6:A 5 13 ExtINT active-hi edge 2 0 4 0 INT active-hi edge 2 1 4 1 INT active-hi edge 2 0 4 2 INT active-hi edge 2 3 4 3 INT active-hi edge 2 4 4 4 INT active-hi edge 2 6 4 6 INT active-hi edge 2 8 4 8 INT active-hi edge 2 12 4 12 INT active-hi edge 2 13 4 13 INT active-hi edge 2 14 4 14 INT active-hi edge 2 15 4 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 2 0 255 0 NMI active-hi edge 0 0:A 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0xc000 address range: 0x2000 -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x100 -- System Address Space bus ID: 0 address type: memory address address base: 0xfc200000 address range: 0x2900000 -- System Address Space bus ID: 0 address type: prefetch address address base: 0xfc000000 address range: 0x100000 -- System Address Space bus ID: 1 address type: I/O address address base: 0xe000 address range: 0x1000 -- System Address Space bus ID: 1 address type: memory address address base: 0xfeb00000 address range: 0x100000 -- System Address Space bus ID: 1 address type: prefetch address address base: 0xfc100000 address range: 0x100000 -- Bus Heirarchy bus ID: 2 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 1 address modifier: subtract predefined range: 0x00000000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 -- Compatibility Bus Address bus ID: 1 address modifier: subtract predefined range: 0x00000001 =============================================================================== Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20011222-CURRENT #0: Sat Dec 22 11:54:13 GMT 2001 root@usw2.freebsd.org:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel.ok/kernel" at 0xc04f9000. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 847182446 Hz CPU: Pentium III/Pentium III Xeon/Celeron (847.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff real memory = 536870912 (524288K bytes) avail memory = 516562944 (504456K bytes) Pentium Pro MTRR support enabled Using $PIR table, 10 entries at 0xc00f51e0 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: on pcib0 pci0: at device 1.0 (no driver attached) fxp0: port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafe000-0xfeafefff irq 9 at device 4.0 on pci0 fxp0: Ethernet address 00:e0:81:02:50:2a inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: port 0xd000-0xd03f mem 0xfe700000-0xfe7fffff,0xfeafd000-0xfeafdfff irq 5 at device 5.0 on pci0 fxp1: Ethernet address 00:e0:81:02:50:2b inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: port 0x580-0x58f at device 15.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: mem 0xfeafc000-0xfeafcfff irq 10 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: at pcibus 1 on motherboard pci1: on pcib1 sym0: <1010-66> port 0xe400-0xe4ff mem 0xfebd8000-0xfebd9fff,0xfebe0000-0xfebe03ff irq 7 at device 6.0 on pci1 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: <1010-66> port 0xe800-0xe8ff mem 0xfebf0000-0xfebf1fff,0xfebf8000-0xfebf83ff irq 10 at device 6.1 on pci1 sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. ata-: ata0 already exists, skipping it ata-: ata1 already exists, skipping it sc-: sc0 already exists, skipping it vga-: vga0 already exists, skipping it orm0: