Date: Tue, 15 Apr 2003 15:28:22 -0700 From: "steven r. eastlake" <seastlake@gci.net> To: freebsd-questions@FreeBSD.ORG Subject: followup to Fwd: tech support Message-ID: <5.2.0.9.0.20030415152243.00a5cec0@mail.gci.net>
next in thread | raw e-mail | index | archive | help
i just looked at MAKEDEV in /usr/src/etc and it is executable, so cd to /dev and attempt /usr/src/etc/MAKEDEV snd0, snd1, then attempt /usr/src/etc/MAKEDEV uhid0, uhid1, all attempts show mknod message "no such file or directory"... move MAKEDEV to / removes execute permission, my confusion... >Date: Tue, 15 Apr 2003 15:08:34 -0700 >To: freebsd-questions@FreeBSD.ORG >From: "steven r. eastlake" <seastlake@gci.net> >Subject: tech support > >i am setting up freebsd 5.0 and would like to attempt to "wake up" my >generic sound >card and also wacom usb tablet mouse/pen > >1. MAKEDEV not in /dev and not executable, found in /usr/src/etc, move to /, > cannot move to /dev, then permission executable >2. MAKEDEV fails numerous ways attempting snd and uhid, review online dialogs > for these failures and try to correct my problems to no avail >3. attempt mknod sndstat c 30 6 root:operator gives "no such file or >directory", an error > message i have seen previously > >i suspect this may be an easy fix for those with knowledge... > >following are setenv, dmesg, which may help... > >thanks for support... > >setenv setenv setenv setenv > >TERM=cons25 >PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/root/bin >MAIL=/var/mail/root >BLOCKSIZE=K >FTP_PASSIVE_MODE=YES >SHELL=/bin/csh >HOME=/root >LOGNAME=root >USER=root >HOSTTYPE=FreeBSD >VENDOR=intel >OSTYPE=FreeBSD >MACHTYPE=i386 >SHLVL=1 >PWD=/root >GROUP=wheel >HOST= >EDITOR=vi >PAGER=more > >dmesg dmesg dmesg dmesg > >Copyright (c) 1992-2003 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.0-RELEASE #0: Wed Apr 9 16:40:57 AKDT 2003 > root@:/usr/src/sys/i386/compile/SREX >Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a7000. >Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04a70a8. >Timecounter "i8254" frequency 1193182 Hz >Timecounter "TSC" frequency 900038103 Hz >CPU: AMD Athlon(tm) processor (900.04-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 > >Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!> >real memory = 805240832 (767 MB) >avail memory = 777211904 (741 MB) >Initializing GEOMetry subsystem >Pentium Pro MTRR support enabled >npx0: <math processor> on motherboard >npx0: INT 16 interface >acpi0: <VT8371 AWRDACPI> on motherboard > ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 >Using $PIR table, 9 entries at 0xc00fdee0 >acpi0: power button is handled as a fixed feature programming model. >Timecounter "ACPI-fast" frequency 3579545 Hz >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 >acpi_cpu0: <CPU> on acpi0 >acpi_button0: <Power Button> on acpi0 >acpi_button1: <Sleep Button> on acpi0 >pcib0: <ACPI Host-PCI bridge> port >0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem >0xe8000000-0xebffffff at device 0.0 on pci0 >pcib1: <PCI-PCI bridge> at device 1.0 on pci0 >pci1: <PCI bus> on pcib1 >pci1: <display, VGA> at device 0.0 (no driver attached) >isab0: <PCI-ISA bridge> at device 7.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 >on pci0 >atapci0: Correcting VIA config for southbridge data corruption bug >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 >on pci0 >usb0: <VIA 83C572 USB controller> on uhci0 >usb0: USB revision 1.0 >uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >ums0: WACOM ET-0405A-UV2.0-3, rev 1.10/2.03, addr 2, iclass 3/1 >ums0: 3 buttons and Z dir. >uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.3 >on pci0 >usb1: <VIA 83C572 USB controller> on uhci1 >usb1: USB revision 1.0 >uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached) >pci0: <serial bus, FireWire> at device 13.0 (no driver attached) >sio0: <3COM PCI FaxModem> port 0xe000-0xe007 irq 10 at device 15.0 on pci0 >sio0: moving to sio4 >sio4: type 16550A >pci0: <multimedia, audio> at device 17.0 (no driver attached) >fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port >0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 >fdc0: FIFO enabled, 8 bytes threshold >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >sio0 port 0x3f8-0x3ff irq 4 on acpi0 >sio0: type 16550A >sio1 port 0x2f8-0x2ff irq 3 on acpi0 >sio1: type 16550A >ppc0 port 0x378-0x37f irq 7 on acpi0 >ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode >ppbus0: IEEE1284 device found /NIBBLE >Probing for PnP devices on ppbus0: >ppbus0: <NEC SuperScript 150C (Monochrome)> PCL III+ >plip0: <PLIP network interface> on ppbus0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >kbd0 at atkbd0 >orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0 >pmtimer0 on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >Timecounters tick every 10.000 msec >acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% >ad0: 8063MB <FUJITSU MPD3084AT> [16383/16/63] at ata0-master UDMA66 >ad2: 114473MB <WDC WD1200BB-00CAA0> [232581/16/63] at ata1-master UDMA100 >ad3: 12971MB <WDC WD136AA-35BAA0> [26354/16/63] at ata1-slave UDMA66 >acd0: CD-RW <SONY CD-RW CRX0811> at ata0-slave PIO4 >Mounting root from ufs:/dev/ad3s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.0.9.0.20030415152243.00a5cec0>