Date: Sun, 15 Jun 2003 23:45:27 -0400 From: "Alexi Papaleonardos" <papaleonardos.3@osu.edu> To: <freebsd-mobile@freebsd.org> Subject: orinoco wavelan (bronze) and vadem isa pcmcia bridge woes? Message-ID: <014901c333b9$b9ca6000$1f00a8c0@metatron>
next in thread | raw e-mail | index | archive | help
Trying to get the orinoco wavelan and an old vadem ISA-PCMCIA bridge to work under 5.1-RELEASE. It bears noting that the whole thing worked wonderfully under 4.0-RELEASE with the exact same hardware. I'm not nearly well-versed enough in NEWCARD to understand what's going on here, but below is the dmesg (with pcmcia debugging flag on in /boot/loader.conf). If anyone has any ideas that would be great! Thanks, Alexi. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Fri Jun 13 00:55:00 GMT 2003 root@ajiao.alexi.us:/usr/src/sys/i386/compile/AJIAO-FW Preloaded elf kernel "/boot/kernel/kernel" at 0xc0693000. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 167046444 Hz CPU: Pentium/P55C (167.05-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 41943040 (40 MB) avail memory = 33796096 (32 MB) bios32: Bad BIOS32 Service Directory Intel Pentium detected, installing workaround for F00F bug npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <display, VGA> at device 10.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 3 on isa0 pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only pccard0: <16-bit PCCard bus> on pcic0 pccard1: <16-bit PCCard bus> on pcic0 pccard2: <16-bit PCCard bus> on pcic0 pcic0: bus_space_alloc range 0x0330-0x03ff (probed) ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA (mono) <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3b0-0x3cf iomem 0xa0000-0xbffff on isa0 ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0 ep0: Ethernet address 00:20:af:26:3f:c5 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (irq) unknown: <PNP0600> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default pccard2: 80 READY ad0: 810MB <QUANTUM TRB850A> [1646/16/63] at ata0-master PIO4 Mounting root from ufs:/dev/ad0s1a pccard1: 40 CD af pccard1: enqueing INSERTION event pccard2: 80 READY pccard1: insertion event pccard1: pcic_chip_socket_enable cardtype mem 40 pcic_chip_mem_map window 0 bus 0+0+400 at card addr 0 pcic_chip_do_mem_map window 0: 0000 8000 0000 pcic_chip_do_mem_map window 0: 00d2 80d2 4000 cis mem map c00d2000 pccard1: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 03 00 00 ff CISTPL_DEVICE_A type=sram speed=ext 17 04 67 5a 08 ff unhandled CISTPL 1d 1d 05 01 67 5a 08 ff CISTPL_VERS_1 15 50 05 00 4c 75 63 65 6e 74 20 54 65 63 68 6e 6f 6c 6f 67 69 65 73 00 57 61 76 65 4c 41 4e 2f 49 45 45 45 00 56 65 72 73 69 6f 6e 20 30 31 2e 30 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff CISTPL_MANFID 20 04 56 01 02 00 CISTPL_FUNCID 21 02 06 00 CISTPL_FUNCE 22 02 01 07 CISTPL_FUNCE 22 05 02 40 42 0f 00 CISTPL_FUNCE 22 05 02 80 84 1e 00 CISTPL_FUNCE 22 02 03 07 CISTPL_FUNCE 22 08 04 06 00 60 1d 04 a7 ab CISTPL_FUNCE 22 02 05 01 CISTPL_CONFIG 1a 07 03 01 e0 03 00 00 01 CISTPL_CFTABLE_ENTRY 1b 0f c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff CISTPL_END ff pcic_chip_do_mem_map window 0: 00d2 80d2 4000 cis mem map c00d2000 CISTPL_LINKTARGET expected, code 01 observed pcic_chip_io_alloc map port 180+40 pccard1: Allocation failed for cfe 1 pccard1: pcic_chip_socket_enable cardtype mem 40 pccard1: No config entry could be allocated.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?014901c333b9$b9ca6000$1f00a8c0>