Date: Wed, 27 Jun 2001 14:41:07 -0600 From: Chuck Paterson <cp@twistedbit.com> To: freebsd-questions@FreeBSD.ORG Subject: vmware2 any configurations known not to work. Message-ID: <200106272041.f5RKf7w00695@grendel.twistedbit.com>
next in thread | raw e-mail | index | archive | help
I'm trying to get vmware 2 running. As soon as I start the virtual
machine the host locks up, and evenutally reboots. I was running
4.2 and just upgraded to 4.3 with the same results. I still
need to upgrade the linux stuff though.
The guest is is going to be w2k if I can every get it that far.
Any suggestion are welcome.
Chuck
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Wed Jun 27 12:52:40 MDT 2001
cp@grendel.twistedbit.com:/cp/src/grendel/src/sys/compile/GRENDEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (996.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 512000000 (500000K bytes)
avail memory = 494604288 (483012K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03d3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 6 -> irq 2
IOAPIC #1 intpin 4 -> irq 5
IOAPIC #1 intpin 5 -> irq 7
IOAPIC #0 intpin 10 -> irq 9
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafe000-0xfeafefff irq 5 at device 4.0 on pci0
fxp0: Ethernet address 00:e0:81:01:ba:59
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd03f mem 0xfe700000-0xfe7fffff,0xfeafd000-0xfeafdfff irq 7 at device 5.0 on pci0
fxp1: Ethernet address 00:e0:81:01:ba:5a
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 9 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhid0: Microsoft SideWinder Precision 2 Joystick, rev 1.10/1.05, addr 2, iclass 3/0
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 13 -> irq 10
IOAPIC #1 intpin 12 -> irq 11
pci1: <PCI bus> on pcib1
sym0: <1010-33> port 0xe400-0xe4ff mem 0xfebd8000-0xfebd9fff,0xfebe0000-0xfebe03ff irq 10 at device 6.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <1010-33> port 0xe800-0xe8ff mem 0xfebf0000-0xfebf1fff,0xfebf8000-0xfebf83ff irq 11 at device 6.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
ad0: 38166MB <ST340823A> [77545/16/63] at ata0-master UDMA33
acd0: CD-RW <PLEXTOR CD-R PX-W1210A> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sa0 at sym0 bus 0 target 1 lun 0
sa0: <SONY SDT-10000 0110> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM-PSG DRHS36D !# 0272> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
Mounting root from ufs:/dev/da0s2a
WARNING: / was not properly dismounted
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
fxp0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106272041.f5RKf7w00695>