Date: Thu, 1 Nov 2007 19:40:12 +0100 From: Max Laier <max@love2party.net> To: freebsd-current@freebsd.org Cc: freebsd-acpi@freebsd.org Subject: apic vs. ASUS P5N-E (nforce 650) Message-ID: <200711011940.18510.max@love2party.net>
next in thread | raw e-mail | index | archive | help
--nextPart3828379.rAXiEC845h Content-Type: multipart/mixed; boundary="Boundary-01=_N2hKHZAYVDEsOTi" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I'm having big trouble with this board. It works fine once I set=20 hint.apic.0.disabled=3D1, but unfortunately without using the second core. = =20 When the apic is used, the nforce IDE/ATA controller and the nforce NIC=20 are not working at all. No disks or CDROMs are recognized, the NIC=20 doesn't send or receive any packets. Attached are verbose dmesgs (captured via serial): boot_v.apic - ACPI enabled APIC enabled boot_v.noacpi - ACPI disabled APIC enabled boot_v.noapic - ACPI enabled APIC disabled (this works) =46WIW, linux (knoppix CD) does boot and seems to use the apic (dmesg=20 attached). I suspect that there is something wrong with the ACPI interrupt overrides. = =20 IRQ9 is listed as (level, high) and IRQ0->2 seems only to make sense if=20 the HEPT is being used, but neither ACPI_Q_MADT_IRQ0 nor forcing (level,=20 low) for IRQ9 in madt.c doesn't seem to do the trick. I've tried a couple of things, but didn't get anywhere. If anyone has an=20 idea I'd be eager to try it. Thanks. =2D-=20 /"\ Best regards, | mlaier@freebsd.org \ / Max Laier | ICQ #67774661 X http://pf4freebsd.love2party.net/ | mlaier@EFnet / \ ASCII Ribbon Campaign | Against HTML Mail and News --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii"; name="mptable" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="mptable" =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D MPTable =2D------------------------------------------------------------------------= =2D----- MP Floating Pointer Structure: location: BIOS physical address: 0x000f5c80 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x7d mode: Virtual Wire =2D------------------------------------------------------------------------= =2D----- MP Config Table Header: physical address: 0x000f1400 signature: 'PCMP' base table length: 300 version: 1.4 checksum: 0xcd OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 29 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 =2D------------------------------------------------------------------------= =2D----- MP Config Base Table Entries: =2D- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 15 11 0xfbff 1 0x11 AP, usable 6 15 11 0xfbff =2D- Bus: Bus ID Type 0 PCI =20 1 PCI =20 2 PCI =20 3 PCI =20 4 ISA =20 =2D- I/O APICs: APIC ID Version State Address 4 0x11 usable 0xfec00000 =2D- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 0 20:A 4 5 INT active-lo level 0 16:B 4 11 INT active-lo level 1 0:A 4 10 INT active-lo level 2 0:A 4 11 INT active-lo level 0 14:A 4 10 INT active-lo level 0 15:A 4 11 ExtINT conforms conforms 4 0 4 0 INT conforms conforms 4 1 4 1 INT conforms conforms 4 0 4 2 INT conforms conforms 4 3 4 3 INT conforms conforms 4 4 4 4 INT conforms conforms 4 6 4 6 INT conforms conforms 4 7 4 7 INT active-hi edge 4 8 4 8 INT conforms conforms 4 9 4 9 INT conforms conforms 4 12 4 12 INT conforms conforms 4 13 4 13 INT conforms conforms 4 14 4 14 INT conforms conforms 4 15 4 15 =2D- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 0 0:A 255 0 NMI conforms conforms 0 0:A 255 1 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii"; name="dmesg.linux" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.linux" Linux version 2.6.19 (root@Knoppix) (gcc version 4.1.2 20061028 (prerelease= ) (Debian 4.1.1-19)) #7 SMP PREEMPT Sun Dec 17 22:01:07 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5c80 Entering add_active_range(0, 0, 524016) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524016 early_node_map[1] active PFN ranges 0: 0 -> 524016 On node 0 totalpages: 524016 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2301 pages used for memmap HighMem zone: 292339 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v002 Nvidia ) @ 0x000f77c0 ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fef30c0 ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fef9740 ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x7fef9980 ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fef9a00 ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fef9880 ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10de8201 base: 0xfeff0000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) Detected 2333.461 MHz processor. Built 1 zonelists. Total pages: 519923 Kernel command line: ramdisk_size=3D100000 init=3D/etc/init lang=3Dus apm= =3Dpower-off vga=3D791 initrd=3Dminirt.gz nomce loglevel=3D0 quiet BOOT_IMA= GE=3Dknoppix BOOT_IMAGE=3Dlinux apic=3Dverbose mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2071932k/2096064k available (2747k kernel code, 22860k reserved, 95= 8k data, 336k init, 1178560k highmem) virtual kernel memory layout: fixmap : 0xffe16000 - 0xfffff000 (1956 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04a6000 - 0xc04fa000 ( 336 kB) .data : 0xc03aef9c - 0xc049e7b4 ( 958 kB) .text : 0xc0100000 - 0xc03aef9c (2747 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 4670.54 BogoMIPS (lpj=3D93= 41081) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= e3fd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3fd 00= 000000 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Checking for popad bug... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b enabled ExtINT on CPU#0 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 4666.73 BogoMIPS (lpj=3D93= 33460) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= e3fd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3fd 00= 000000 00000001 CPU1: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b Total of 2 processors activated (9337.27 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 n= ot connected. =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 Using local APIC timer interrupts. calibrating APIC timer ... =2E.... CPU clock speed is 2333.1335 MHz. =2E.... host bus clock speed is 333.1333 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=3D65 checking if image is initramfs...it isn't (no cpio magic); looks like an in= itrd =46reeing initrd memory: 1188k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport number of MP IRQ sources: 15. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #4...... =2E... register #00: 00000000 =2E...... : physical APIC id: 00 =2E...... : Delivery Type: 0 =2E...... : LTS : 0 =2E... register #01: 00170011 =2E...... : max redirection entries: 0017 =2E...... : PRQ implemented: 0 =2E...... : IO APIC version: 0011 =2E... register #02: 00000000 =2E...... : arbitration: 00 =2E... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 003 03 1 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 1 0 0 0 0 1 1 49 05 003 03 1 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 1 0 0 0 0 1 1 61 08 003 03 1 0 0 0 0 1 1 69 09 003 03 0 1 0 0 0 1 1 71 0a 003 03 1 0 0 0 0 1 1 79 0b 003 03 1 0 0 0 0 1 1 81 0c 003 03 1 0 0 0 0 1 1 89 0d 003 03 1 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 =2E................................... done. NetLabel: Initializing NetLabel: domain hash size =3D 128 NetLabel: protocols =3D UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0x1000-0x107f could not be reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:03.0 IO window: e000-efff MEM window: fa000000-fcffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:07.0 IO window: c000-cfff MEM window: fdd00000-fddfffff PREFETCH window: fdc00000-fdcfffff PCI: Bridge: 0000:00:10.0 IO window: d000-dfff MEM window: fdf00000-fdffffff PREFETCH window: fde00000-fdefffff PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1193849666.040:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.8) fuse distribution version: 2.6.1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Setting latency timer of device 0000:00:03.0 to 64 pcie_portdrv_probe->Dev[03b7:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie03] PCI: Setting latency timer of device 0000:00:07.0 to 64 pcie_portdrv_probe->Dev[03bb:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie03] vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3072k, total= 262144k vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D1 vesafb: protected mode interface info at c000:c340 vesafb: pmi: set display start =3D c00cc376, set palette =3D c00cc3e0 vesafb: pmi: ports =3D 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce = 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da=20 vesafb: scrolling: redraw vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: IBM-DTLA-305040, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=3D65535/16/63 hda: cache flushes not supported hda: hda1 hda1: <bsd: hda5 hda6 hda7 hda8 hda9 > hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724.<7>ahci 0000:02:00.0: version 2.0 ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -= > IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part=20 ata1: SATA max UDMA/133 cmd 0xF881C100 ctl 0x0 bmdma 0x0 irq 16 scsi0 : ahci ata1: SATA link down (SStatus 0 SControl 300) sata_nv 0000:00:0e.0: version 2.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -= > IRQ 17 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata2: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF800 irq 17 ata3: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF808 irq 17 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 293046768 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 1 ata2.00: configured for UDMA/133 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 1:0:0:0: Direct-Access ATA WDC WD1500AHFD-0 21.0 PQ: 0 ANSI: 5 SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 1:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -= > IRQ 18 PCI: Setting latency timer of device 0000:00:0f.0 to 64 ata4: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF300 irq 18 ata5: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF308 irq 18 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x9E7 scsi4 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x967 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 EISA: Detected 0 cards. Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 input: PS2++ Logitech Wheel Mouse as /class/input/input1 RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). =46ailed initialization of WD-7000 SCSI card! usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -= > IRQ 19 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 19, io mem 0xfe02e000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 20 (level, low) -= > IRQ 20 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -= > IRQ 21 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[21] MMIO=3D[fdfff000-fdfff= 7ff] Max Packet=3D[2048] IR/IT contexts=3D[4/8] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=3D1) ieee1394: sbp2: Try serialize_io=3D0 for better performance ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001682310] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed = soon! Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev hda. ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs= on hda =46AT: invalid media value (0xa5) VFS: Can't find a valid FAT filesystem on dev hda. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.05 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 15609 blocks, 131072 bytes/block, largest bl= ock is 131098 bytes. cloop: loaded 256 blocks into cache. ISO 9660 Extensions: RRIP_1991A aufs 2.6.19-20061211 =46reeing unused kernel memory: 336k freed ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) Using specific hotkey driver ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not= present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not= present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Thermal Zone [THRM] (40 C) cpufreq: No nForce2 chipset. p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <lin= ux@brodo.de> p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <lin= ux@brodo.de> powernow: This module only works with AMD K7 CPUs Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -= > IRQ 17 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA 00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A eth1: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] eth1: no link during initialization. ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -= > IRQ 18 PCI: Setting latency timer of device 0000:00:10.1 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... NET: Registered protocol family 17 eth1: link up. Linux agpgart interface v0.101 (c) Dave Jones device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redha= t.com NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii"; name="boot_v.noapic" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="boot_v.noapic" /boot/kernel/acpi.ko text=0x53728 data=0x23a0+0x186c syms=[0x4+0x85f0+0x4+0xb06b] GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000001400000 SMAP type=02 base=00000000f0000000 len=0000000002000000 SMAP type=03 base=000000007fef3000 len=000000000000d000 SMAP type=04 base=000000007fef0000 len=0000000000003000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=01 base=0000000000100000 len=000000007fdf0000 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA1 #5: Thu Nov 1 18:21:33 CET 2007 mlaier@c2d.laiers.local:/usr/src/sys/i386/compile/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1691000. Preloaded mfs_root "/boot/mfsroot" at 0xc1691180. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc16911c4. Calibrating clock(s) ... i8254 clock: 1193192 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2333352742 Hz CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2333.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 2146369536 (2046 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001828000 - 0x000000007daa4fff, 2082983936 bytes (508541 pages) avail memory = 2082439168 (1985 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb430 bios32: Entry = 0xfba10 (c00fba10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xba40 pnpbios: Found PnP BIOS data at 0xc00fc5e0 pnpbios: Entry = f0000:c610 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Nov 1 2007 18:21:22) ACPI: RSDP @ 0x0xf77c0/0x0024 (v 2 Nvidia) ACPI: XSDT @ 0x0x7fef30c0/0x0044 (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x7fef9740/0x00F4 (v 3 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x7fef3240/0x64AC (v 1 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x7fef0000/0x0040 ACPI: HPET @ 0x0x7fef9980/0x0038 (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000098) ACPI: MCFG @ 0x0x7fef9a00/0x003C (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x7fef9880/0x0098 (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) npx0: INT 16 interface acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd9895000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80006804 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03a310de) pcibios: BIOS version 3.00 AcpiOsDerivePciId: \_SB_.PCI0.BRCR -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0 AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 9 10 11 14 15 Validation 0 10 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 9 10 11 14 15 Validation 0 10 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 17 Validation 0 255 N 0 17 After Disable 0 255 N 0 17 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 18 Validation 0 255 N 0 18 After Disable 0 255 N 0 18 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 19 Validation 0 255 N 0 19 After Disable 0 255 N 0 19 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link34: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link35: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link36: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link37: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link38: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link39: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link40: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 7 hz: 25000000 opts: leg_route Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.10.INTA at func 1: 255 ACPI: Found matching pin for 0.11.INTA at func 0: 255 ACPI: Found matching pin for 0.11.INTB at func 1: 255 ACPI: Found matching pin for 0.20.INTA at func 0: 5 ACPI: Found matching pin for 0.16.INTB at func 1: 11 ACPI: Found matching pin for 0.14.INTA at func 0: 10 ACPI: Found matching pin for 0.15.INTA at func 0: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x03a3, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ac, revid=0xa1 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03aa, revid=0xa1 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03a9, revid=0xa1 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ab, revid=0xa1 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03a8, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0004, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b5, revid=0xa1 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b4, revid=0xa1 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ad, revid=0xa1 domain=0, bus=0, slot=1, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ae, revid=0xa1 domain=0, bus=0, slot=1, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03af, revid=0xa1 domain=0, bus=0, slot=1, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b0, revid=0xa1 domain=0, bus=0, slot=1, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b1, revid=0xa1 domain=0, bus=0, slot=1, func=4 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b2, revid=0xa1 domain=0, bus=0, slot=1, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b3, revid=0xa1 domain=0, bus=0, slot=1, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b6, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03bc, revid=0xa1 domain=0, bus=0, slot=2, func=1 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ba, revid=0xa1 domain=0, bus=0, slot=2, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b7, revid=0xa1 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x03bb, revid=0xa1 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x1c00, size 6, enabled map[24]: type I/O Port, range 32, base 0x1c80, size 6, enabled found-> vendor=0x10de, dev=0x0272, revid=0xa3 domain=0, bus=0, slot=10, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled found-> vendor=0x10de, dev=0x0265, revid=0xa1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xfd00, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xa1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled map[18]: type I/O Port, range 32, base 0x970, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled map[20]: type I/O Port, range 32, base 0xf800, size 4, enabled map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.14.INTA (src \_SB_.PCI0.LSID:0) pcib0: slot 14 INTA routed to irq 10 via \_SB_.PCI0.LSID found-> vendor=0x10de, dev=0x0267, revid=0xa1 domain=0, bus=0, slot=15, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled map[18]: type I/O Port, range 32, base 0x960, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled map[20]: type I/O Port, range 32, base 0xf300, size 4, enabled map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled pcib0: matched entry for 0.15.INTA (src \_SB_.PCI0.LFID:0) pcib0: slot 15 INTA routed to irq 11 via \_SB_.PCI0.LFID found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LAZA:0) pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled map[14]: type I/O Port, range 32, base 0xf200, size 3, enabled pcib0: matched entry for 0.20.INTA (src \_SB_.PCI0.LMAC:0) pcib0: slot 20 INTA routed to irq 5 via \_SB_.PCI0.LMAC pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) pci0: <memory, RAM> at device 2.1 (no driver attached) pci0: <memory, RAM> at device 2.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfa000000-0xfcffffff pcib1: prefetched decode 0xe0000000-0xefffffff pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.XVRA - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0391, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled pcib1: requested memory range 0xfb000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xef00, size 7, enabled pcib1: requested I/O range 0xef00-0xef7f: in range pcib0: matched entry for 0.3.INTA (src \_SB_.PCI0.LNK5:0) pcib0: slot 3 INTA routed to irq 10 via \_SB_.PCI0.LNK5 pcib1: slot 0 INTA is routed to irq 10 vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 10 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfdc00000-0xfdcfffff pcib2: could not get PCI interrupt routing table for \_SB_.PCI0.XVRD - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x197b, dev=0x2360, revid=0x02 domain=0, bus=2, slot=0, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled pcib2: requested I/O range 0xcf00-0xcf07: in range map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled pcib2: requested I/O range 0xce00-0xce03: in range map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled pcib2: requested I/O range 0xcd00-0xcd07: in range map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled pcib2: requested I/O range 0xcc00-0xcc03: in range map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled pcib2: requested I/O range 0xcb00-0xcb0f: in range map[24]: type Memory, range 32, base 0xfddfe000, size 13, enabled pcib2: requested memory range 0xfddfe000-0xfddfffff: good pcib0: matched entry for 0.7.INTA (src \_SB_.PCI0.LNK6:0) pcib0: slot 7 INTA routed to irq 11 via \_SB_.PCI0.LNK6 pcib2: slot 0 INTA is routed to irq 11 atapci0: <JMicron JMB360 SATA300 controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfddfe000-0xfddfffff irq 11 at device 0.0 on pci2 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfddfe000 atapci0: AHCI Version 01.00 controller with 1 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect status=00000000 ata2: ahci_reset devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at device 11.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LUBA:0) pci_link8: Picked IRQ 9 with weight 0 pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LUBA ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 11.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.LUB2:0) pci_link16: Picked IRQ 5 with weight 1 pcib0: slot 11 INTB routed to irq 5 via \_SB_.PCI0.LUB2 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci1: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device 13.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfd00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] ata1: [ITHREAD] atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf800-0xf80f mem 0xfe02d000-0xfe02dfff irq 10 at device 14.0 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf800 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 ata3: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] atapci3: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf300-0xf30f mem 0xfe02c000-0xfe02cfff irq 11 at device 15.0 on pci0 atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf300 atapci3: [MPSAFE] atapci3: [ITHREAD] atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 ata5: <ATA channel 0> on atapci3 atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata5: SATA connect status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 1> on atapci3 atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata6: SATA connect status=00000000 ata6: [MPSAFE] ata6: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xd000-0xdfff pcib3: memory decode 0xfdf00000-0xfdffffff pcib3: prefetched decode 0xfde00000-0xfdefffff pcib3: Subtractively decoded bridge. ACPI: Found matching pin for 3.8.INTA at func 0: 255 pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x1106, dev=0x3044, revid=0xc0 domain=0, bus=3, slot=8, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=255 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdfff000, size 11, enabled pcib3: requested memory range 0xfdfff000-0xfdfff7ff: good map[14]: type I/O Port, range 32, base 0xdf00, size 7, enabled pcib3: requested I/O range 0xdf00-0xdf7f: in range fwohci0: <VIA Fire II (VT6306)> port 0xdf00-0xdf7f mem 0xfdfff000-0xfdfff7ff at device 8.0 on pci3 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdfff000 pcib3: matched entry for 3.8.INTA (src \_SB_.PCI0.LNK3:0) pci_link2: Picked IRQ 9 with weight 1 pcib3: slot 8 INTA routed to irq 9 via \_SB_.PCI0.LNK3 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:01:68:23:10 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:68:23:10 fwe0: bpf attached fwe0: Ethernet address: 02:11:d8:68:23:10 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:11:d8:00:01:68:23:10 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xb825e0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci0: <multimedia> at device 16.1 (no driver attached) nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xf200-0xf207 mem 0xfe02b000-0xfe02bfff irq 5 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1d:60:0c:17:71 nfe0: [MPSAFE] nfe0: [FILTER] acpi_tz0: <Thermal Zone> on acpi0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FILTER] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 07 03 c8 psm: status 07 03 c8 psm: status 07 03 c8 psm: data c8 c2 38 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model MouseMan+, device ID 0-38, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:08, syncbits:00 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd7fff,0xd8000-0xd9fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 133530 -> 100000 procfs registered firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) Timecounter "TSC" frequency 2333352742 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. md0: Preloaded image </boot/mfsroot> 9437184 bytes at 0xc0d237e0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on nForce MCP51 chip ad0: setting UDMA100 on nForce MCP51 chip ad0: 39266MB <IBM DTLA-305040 TW4OA60A> at ata0-master UDMA100 ad0: 80418240 sectors [79780C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: nVidia check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: setting PIO4 on nForce MCP51 chip acd0: setting UDMA33 on nForce MCP51 chip acd0: <HL-DT-ST DVDRAM GSA-4120B/A102> DVDR drive at ata1 as master acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: 143089MB <WDC WD1500AHFD-00RAR5 21.07QR5> at ata3-master SATA150 ad6: 293046768 sectors [290721C/16H/63S] 16 sectors/interrupt 1 depth queue ad6: nVidia check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed GEOM: new disk ad6 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii"; name="devinfo_rv" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="devinfo_rv" nexus0 legacy0 ram0 I/O memory addresses: 0x0-0x9dfff 0x100000-0x7feeffff npx0 acpi0 Interrupt request lines: 0x9 I/O ports: 0x10-0x1f 0x22-0x3f 0x44-0x5f 0x62-0x63 0x65-0x6f 0x74-0x7f 0x91-0x93 0xa2-0xbf 0xe0-0xef 0x290-0x297 0x4d0-0x4d1 0x800-0x87f 0x880-0x88f 0x1000-0x107f 0x1080-0x10ff 0x1400-0x147f 0x1480-0x14ff 0x1800-0x187f 0x1880-0x18ff I/O memory addresses: 0xda000-0xdbfff 0xf0000-0xf7fff 0xf8000-0xfbfff 0xfc000-0xfffff 0x7fef0000-0x7fefffff 0xf0000000-0xf1ffffff 0xfec00000-0xfec00fff 0xfee00000-0xfee00fff 0xfeff0000-0xfeff03ff 0xffff0000-0xffffffff cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0 est0 p4tcc0 cpufreq0 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2 unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU3 acpi_button0 pnpinfo _HID=PNP0C0C _UID=0 at handle=\_SB_.PWRB pcib0 pnpinfo _HID=PNP0A08 _UID=1 at handle=\_SB_.PCI0 pci0 hostb0 pnpinfo vendor=0x10de device=0x03a3 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=0 unknown pnpinfo vendor=0x10de device=0x03ac subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=1 unknown pnpinfo vendor=0x10de device=0x03aa subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=2 handle=\_SB_.PCI0.MIP4 unknown pnpinfo vendor=0x10de device=0x03a9 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=3 unknown pnpinfo vendor=0x10de device=0x03ab subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=4 unknown pnpinfo vendor=0x10de device=0x03a8 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=5 unknown pnpinfo vendor=0x10de device=0x03b5 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=6 unknown pnpinfo vendor=0x10de device=0x03b4 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=0 function=7 unknown pnpinfo vendor=0x10de device=0x03ad subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=0 unknown pnpinfo vendor=0x10de device=0x03ae subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=1 unknown pnpinfo vendor=0x10de device=0x03af subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=2 unknown pnpinfo vendor=0x10de device=0x03b0 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=3 unknown pnpinfo vendor=0x10de device=0x03b1 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=4 unknown pnpinfo vendor=0x10de device=0x03b2 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=5 unknown pnpinfo vendor=0x10de device=0x03b3 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=1 function=6 unknown pnpinfo vendor=0x10de device=0x03b6 subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=2 function=0 unknown pnpinfo vendor=0x10de device=0x03bc subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=2 function=1 unknown pnpinfo vendor=0x10de device=0x03ba subvendor=0x0000 subdevice=0x0000 class=0x050000 at slot=2 function=2 pcib1 pnpinfo vendor=0x10de device=0x03b7 subvendor=0x10de subdevice=0x0c55 class=0x060400 at slot=3 function=0 handle=\_SB_.PCI0.XVRA pci1 vgapci0 pnpinfo vendor=0x10de device=0x0391 subvendor=0x1682 subdevice=0x2220 class=0x030000 at slot=0 function=0 I/O ports: 0xef00-0xef7f I/O memory addresses: 0xe0000000-0xefffffff 0xfa000000-0xfaffffff 0xfb000000-0xfbffffff drm0 pcib2 pnpinfo vendor=0x10de device=0x03bb subvendor=0x10de subdevice=0x0c55 class=0x060400 at slot=7 function=0 handle=\_SB_.PCI0.XVRD pci2 atapci0 pnpinfo vendor=0x197b device=0x2360 subvendor=0x1043 subdevice=0x8208 class=0x010601 at slot=0 function=0 Interrupt request lines: 0xb I/O ports: 0xcb00-0xcb0f 0xcc00-0xcc03 0xcd00-0xcd07 0xce00-0xce03 0xcf00-0xcf07 I/O memory addresses: 0xfddfe000-0xfddfffff ata2 unknown pnpinfo vendor=0x10de device=0x0270 subvendor=0x1043 subdevice=0x81bc class=0x050000 at slot=9 function=0 isab0 pnpinfo vendor=0x10de device=0x0260 subvendor=0x1043 subdevice=0x81bc class=0x060100 at slot=10 function=0 handle=\_SB_.PCI0.VT86 isa0 adv0 aha0 aic0 bt0 cs0 ed0 fdc0 I/O ports: 0x3f7 fe0 ie0 le0 ppc0 Interrupt request lines: 0x7 I/O ports: 0x378-0x37f ppbus0 ppi0 plip0 lpt0 sc0 sio1 sio2 sio3 sn0 vga0 I/O ports: 0x3c0-0x3df I/O memory addresses: 0xa0000-0xbffff vt0 orm0 pnpinfo pnpid=ORM0000 I/O memory addresses: 0xd0000-0xd7fff 0xd8000-0xd9fff pmtimer0 unknown pnpinfo vendor=0x10de device=0x0264 subvendor=0x1043 subdevice=0x81bc class=0x0c0500 at slot=10 function=1 handle=\_SB_.PCI0.SMB0 I/O ports: 0x1c00-0x1c3f 0x1c80-0x1cbf unknown pnpinfo vendor=0x10de device=0x0272 subvendor=0x1043 subdevice=0x81bc class=0x050000 at slot=10 function=2 ohci0 pnpinfo vendor=0x10de device=0x026d subvendor=0x1043 subdevice=0x81bc class=0x0c0310 at slot=11 function=0 handle=\_SB_.PCI0.USB0 I/O memory addresses: 0xfe02f000-0xfe02ffff usb0 uhub0 ehci0 pnpinfo vendor=0x10de device=0x026e subvendor=0x1043 subdevice=0x81bc class=0x0c0320 at slot=11 function=1 handle=\_SB_.PCI0.USB2 Interrupt request lines: 0x5 I/O memory addresses: 0xfe02e000-0xfe02e0ff usb1 uhub1 atapci1 pnpinfo vendor=0x10de device=0x0265 subvendor=0x1043 subdevice=0x81bc class=0x01018a at slot=13 function=0 handle=\_SB_.PCI0.IDE0 I/O ports: 0x170-0x177 0x1f0-0x1f7 0x376 0x3f6 0xfd00-0xfd0f ata0 Interrupt request lines: 0xe ad0 subdisk0 ata1 Interrupt request lines: 0xf acd0 atapci2 pnpinfo vendor=0x10de device=0x0266 subvendor=0x1043 subdevice=0x81bc class=0x010185 at slot=14 function=0 handle=\_SB_.PCI0.SAT1 Interrupt request lines: 0xa I/O ports: 0x970-0x977 0x9f0-0x9f7 0xb70-0xb73 0xbf0-0xbf3 0xf800-0xf80f I/O memory addresses: 0xfe02d000-0xfe02dfff ata3 ad6 subdisk6 ata4 atapci3 pnpinfo vendor=0x10de device=0x0267 subvendor=0x1043 subdevice=0x81bc class=0x010185 at slot=15 function=0 handle=\_SB_.PCI0.SAT2 I/O ports: 0x960-0x967 0x9e0-0x9e7 0xb60-0xb63 0xbe0-0xbe3 0xf300-0xf30f I/O memory addresses: 0xfe02c000-0xfe02cfff ata5 ata6 pcib3 pnpinfo vendor=0x10de device=0x026f subvendor=0x10de subdevice=0xcb84 class=0x060401 at slot=16 function=0 handle=\_SB_.PCI0.HUB0 pci3 fwohci0 pnpinfo vendor=0x1106 device=0x3044 subvendor=0x1043 subdevice=0x81fe class=0x0c0010 at slot=8 function=0 I/O ports: 0xdf00-0xdf7f I/O memory addresses: 0xfdfff000-0xfdfff7ff firewire0 fwe0 fwip0 sbp0 dcons_crom0 unknown pnpinfo vendor=0x10de device=0x026c subvendor=0x1043 subdevice=0x8249 class=0x040300 at slot=16 function=1 handle=\_SB_.PCI0.AZAD I/O memory addresses: 0xfe024000-0xfe027fff nfe0 pnpinfo vendor=0x10de device=0x0269 subvendor=0x1043 subdevice=0x8221 class=0x068000 at slot=20 function=0 handle=\_SB_.PCI0.MMAC I/O ports: 0xf200-0xf207 I/O memory addresses: 0xfe02b000-0xfe02bfff miibus0 e1000phy0 pnpinfo oui=0x5043 model=0x21 rev=0x1 at phyno=1 acpi_sysresource0 pnpinfo _HID=PNP0C02 _UID=5 at handle=\_SB_.PCI0.MBIO unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.PRI0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.PRI0.MAST unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.SEC0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.SEC0.MAST unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT2.PRI0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT2.PRI0.MAST unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT2.SEC0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT2.SEC0.MAST unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.PRI0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.PRI0.MAST unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.PRI0.SLAV unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.SEC0 unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.SEC0.MAST unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.SEC0.SLAV unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.XVRB unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.XVRC acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=1 at handle=\_SB_.PCI0.VT86.SYSR atpic0 pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.VT86.PIC_ atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.VT86.DMA1 attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.VT86.TMR_ unknown pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.VT86.HPET attimer1 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.VT86.RTC_ unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.VT86.SPKR npxisa0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.VT86.COPR unknown pnpinfo _HID=PNP0700 _UID=0 at handle=\_SB_.PCI0.VT86.FDC0 sio0 pnpinfo _HID=PNP0501 _UID=1 at handle=\_SB_.PCI0.VT86.UAR1 Interrupt request lines: 0x4 I/O ports: 0x3f8-0x3ff unknown pnpinfo _HID=PNP0400 _UID=1 at handle=\_SB_.PCI0.VT86.LPT1 unknown pnpinfo _HID=PNP0401 _UID=1 at handle=\_SB_.PCI0.VT86.ECP1 psmcpnp0 pnpinfo _HID=PNP0F13 _UID=0 at handle=\_SB_.PCI0.VT86.PS2M Interrupt request lines: 0xc atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.VT86.PS2K I/O ports: 0x60 0x64 atkbd0 Interrupt request lines: 0x1 psm0 unknown pnpinfo _HID=PNP0C02 _UID=3 at handle=\_SB_.PCI0.VT86.PSMR unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.MACI unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.MMCI unknown pnpinfo _HID=NVRAIDBUS _UID=0 at handle=\_SB_.PCI0.NVRB unknown pnpinfo _HID=ATK0110 _UID=16843024 at handle=\_SB_.PCI0.ASOC pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.PCI0.LNK1 pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.PCI0.LNK2 pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.PCI0.LNK3 pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.PCI0.LNK4 pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.PCI0.LNK5 pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.PCI0.LNK6 pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.PCI0.LNK7 pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.PCI0.LNK8 pci_link8 pnpinfo _HID=PNP0C0F _UID=9 at handle=\_SB_.PCI0.LUBA pci_link9 pnpinfo _HID=PNP0C0F _UID=10 at handle=\_SB_.PCI0.LUBB pci_link10 pnpinfo _HID=PNP0C0F _UID=11 at handle=\_SB_.PCI0.LMAC pci_link11 pnpinfo _HID=PNP0C0F _UID=12 at handle=\_SB_.PCI0.LACI pci_link12 pnpinfo _HID=PNP0C0F _UID=13 at handle=\_SB_.PCI0.LAZA pci_link13 pnpinfo _HID=PNP0C0F _UID=14 at handle=\_SB_.PCI0.LPMU pci_link14 pnpinfo _HID=PNP0C0F _UID=15 at handle=\_SB_.PCI0.LMCI pci_link15 pnpinfo _HID=PNP0C0F _UID=16 at handle=\_SB_.PCI0.LSMB pci_link16 pnpinfo _HID=PNP0C0F _UID=17 at handle=\_SB_.PCI0.LUB2 pci_link17 pnpinfo _HID=PNP0C0F _UID=18 at handle=\_SB_.PCI0.LIDE pci_link18 pnpinfo _HID=PNP0C0F _UID=19 at handle=\_SB_.PCI0.LSID pci_link19 pnpinfo _HID=PNP0C0F _UID=20 at handle=\_SB_.PCI0.LFID pci_link20 pnpinfo _HID=PNP0C0F _UID=21 at handle=\_SB_.PCI0.APC1 pci_link21 pnpinfo _HID=PNP0C0F _UID=22 at handle=\_SB_.PCI0.APC2 pci_link22 pnpinfo _HID=PNP0C0F _UID=23 at handle=\_SB_.PCI0.APC3 pci_link23 pnpinfo _HID=PNP0C0F _UID=24 at handle=\_SB_.PCI0.APC4 pci_link24 pnpinfo _HID=PNP0C0F _UID=25 at handle=\_SB_.PCI0.APC5 pci_link25 pnpinfo _HID=PNP0C0F _UID=26 at handle=\_SB_.PCI0.APC6 pci_link26 pnpinfo _HID=PNP0C0F _UID=27 at handle=\_SB_.PCI0.APC7 pci_link27 pnpinfo _HID=PNP0C0F _UID=28 at handle=\_SB_.PCI0.APC8 pci_link28 pnpinfo _HID=PNP0C0F _UID=29 at handle=\_SB_.PCI0.APCF pci_link29 pnpinfo _HID=PNP0C0F _UID=30 at handle=\_SB_.PCI0.APCG pci_link30 pnpinfo _HID=PNP0C0F _UID=31 at handle=\_SB_.PCI0.APCH pci_link31 pnpinfo _HID=PNP0C0F _UID=32 at handle=\_SB_.PCI0.APCJ pci_link32 pnpinfo _HID=PNP0C0F _UID=33 at handle=\_SB_.PCI0.APMU pci_link33 pnpinfo _HID=PNP0C0F _UID=34 at handle=\_SB_.PCI0.AAZA pci_link34 pnpinfo _HID=PNP0C0F _UID=35 at handle=\_SB_.PCI0.APCK pci_link35 pnpinfo _HID=PNP0C0F _UID=36 at handle=\_SB_.PCI0.APCS pci_link36 pnpinfo _HID=PNP0C0F _UID=37 at handle=\_SB_.PCI0.APCL pci_link37 pnpinfo _HID=PNP0C0F _UID=38 at handle=\_SB_.PCI0.APCM pci_link38 pnpinfo _HID=PNP0C0F _UID=39 at handle=\_SB_.PCI0.APCZ pci_link39 pnpinfo _HID=PNP0C0F _UID=40 at handle=\_SB_.PCI0.APSI pci_link40 pnpinfo _HID=PNP0C0F _UID=41 at handle=\_SB_.PCI0.APSJ acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=4 at handle=\_SB_.PCI0.EXPL acpi_sysresource3 pnpinfo _HID=PNP0C01 _UID=0 at handle=\_SB_.MEM_ unknown pnpinfo _HID=PNP0C0B _UID=0 at handle=\_TZ_.FAN_ acpi_tz0 pnpinfo _HID=none _UID=0 at handle=\_TZ_.THRM acpi_timer0 pnpinfo unknown at unknown ACPI I/O ports: 0x1008-0x100b acpi_hpet0 pnpinfo unknown at unknown ACPI I/O memory addresses: 0xfeff0000-0xfeff03ff --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii"; name="boot_v.apic" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="boot_v.apic" set hint.apic.0.disabled=0 OK boot -vs /boot/kernel/acpi.ko text=0x53728 data=0x23a0+0x186c syms=[0x4+0x85f0+0x4+0xb06b] GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000001400000 SMAP type=02 base=00000000f0000000 len=0000000002000000 SMAP type=03 base=000000007fef3000 len=000000000000d000 SMAP type=04 base=000000007fef0000 len=0000000000003000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=01 base=0000000000100000 len=000000007fdf0000 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA1 #5: Thu Nov 1 18:21:33 CET 2007 mlaier@c2d.laiers.local:/usr/src/sys/i386/compile/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1691000. Preloaded mfs_root "/boot/mfsroot" at 0xc1691180. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc16911c4. Calibrating clock(s) ... i8254 clock: 1193192 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2333351867 Hz CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2333.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 2146369536 (2046 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001828000 - 0x000000007daa4fff, 2082983936 bytes (508541 pages) avail memory = 2082439168 (1985 MB) Table 'FACP' at 0x7fef9740 Table 'HPET' at 0x7fef9980 Table 'MCFG' at 0x7fef9a00 Table 'APIC' at 0x7fef9880 MADT: Found table at 0x7fef9880 MP Configuration Table version 1.4 found at 0xc00f1400 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled ACPI APIC Table: <Nvidia ASUSACPI> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fb430 bios32: Entry = 0xfba10 (c00fba10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xba40 pnpbios: Found PnP BIOS data at 0xc00fc5e0 pnpbios: Entry = f0000:c610 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ACPI: RSDP @ 0x0xf77c0/0x0024 (v 2 Nvidia) ACPI: XSDT @ 0x0x7fef30c0/0x0044 (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x7fef9740/0x00F4 (v 3 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x7fef3240/0x64AC (v 1 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x7fef0000/0x0040 ACPI: HPET @ 0x0x7fef9980/0x0038 (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000098) ACPI: MCFG @ 0x0x7fef9a00/0x003C (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x7fef9880/0x0098 (v 1 Nvidia ASUSACPI 0x42302E31 AWRD 0x00000000) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Interrupt override: source 14, irq 14 MADT: Interrupt override: source 15, irq 15 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Nov 1 2007 18:21:22) npx0: INT 16 interface acpi0: <Nvidia ASUSACPI> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd9895000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80006804 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03a310de) pcibios: BIOS version 3.00 AcpiOsDerivePciId: \_SB_.PCI0.BRCR -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0 AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 9 10 11 14 15 Validation 0 10 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 9 10 11 14 15 Validation 0 10 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 17 Validation 0 255 N 0 17 After Disable 0 255 N 0 17 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 18 Validation 0 255 N 0 18 After Disable 0 255 N 0 18 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 19 Validation 0 255 N 0 19 After Disable 0 255 N 0 19 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link34: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link35: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link36: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link37: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link38: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link39: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link40: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 7 hz: 25000000 opts: leg_route Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x03a3, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ac, revid=0xa1 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03aa, revid=0xa1 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03a9, revid=0xa1 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ab, revid=0xa1 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03a8, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0004, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b5, revid=0xa1 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b4, revid=0xa1 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ad, revid=0xa1 domain=0, bus=0, slot=1, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ae, revid=0xa1 domain=0, bus=0, slot=1, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03af, revid=0xa1 domain=0, bus=0, slot=1, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b0, revid=0xa1 domain=0, bus=0, slot=1, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b1, revid=0xa1 domain=0, bus=0, slot=1, func=4 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b2, revid=0xa1 domain=0, bus=0, slot=1, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b3, revid=0xa1 domain=0, bus=0, slot=1, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b6, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03bc, revid=0xa1 domain=0, bus=0, slot=2, func=1 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ba, revid=0xa1 domain=0, bus=0, slot=2, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b7, revid=0xa1 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x03bb, revid=0xa1 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x1c00, size 6, enabled map[24]: type I/O Port, range 32, base 0x1c80, size 6, enabled found-> vendor=0x10de, dev=0x0272, revid=0xa3 domain=0, bus=0, slot=10, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled found-> vendor=0x10de, dev=0x0265, revid=0xa1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xfd00, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xa1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled map[18]: type I/O Port, range 32, base 0x970, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled map[20]: type I/O Port, range 32, base 0xf800, size 4, enabled map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.14.INTA (src \_SB_.PCI0.APSI:0) pci_link39: Picked IRQ 20 with weight 0 pcib0: slot 14 INTA routed to irq 20 via \_SB_.PCI0.APSI found-> vendor=0x10de, dev=0x0267, revid=0xa1 domain=0, bus=0, slot=15, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled map[18]: type I/O Port, range 32, base 0x960, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled map[20]: type I/O Port, range 32, base 0xf300, size 4, enabled map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled pcib0: matched entry for 0.15.INTA (src \_SB_.PCI0.APSJ:0) pci_link40: Picked IRQ 21 with weight 0 pcib0: slot 15 INTA routed to irq 21 via \_SB_.PCI0.APSJ found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.AAZA:0) pci_link33: Picked IRQ 22 with weight 0 pcib0: slot 16 INTB routed to irq 22 via \_SB_.PCI0.AAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled map[14]: type I/O Port, range 32, base 0xf200, size 3, enabled pcib0: matched entry for 0.20.INTA (src \_SB_.PCI0.APCH:0) pci_link30: Picked IRQ 23 with weight 0 pcib0: slot 20 INTA routed to irq 23 via \_SB_.PCI0.APCH pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) pci0: <memory, RAM> at device 2.1 (no driver attached) pci0: <memory, RAM> at device 2.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfa000000-0xfcffffff pcib1: prefetched decode 0xe0000000-0xefffffff pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.XVRA - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0391, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled pcib1: requested memory range 0xfb000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xef00, size 7, enabled pcib1: requested I/O range 0xef00-0xef7f: in range pcib0: matched entry for 0.3.INTA (src \_SB_.PCI0.APC5:0) pci_link24: Picked IRQ 16 with weight 0 pcib0: slot 3 INTA routed to irq 16 via \_SB_.PCI0.APC5 pcib1: slot 0 INTA is routed to irq 16 vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfdc00000-0xfdcfffff pcib2: could not get PCI interrupt routing table for \_SB_.PCI0.XVRD - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x197b, dev=0x2360, revid=0x02 domain=0, bus=2, slot=0, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled pcib2: requested I/O range 0xcf00-0xcf07: in range map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled pcib2: requested I/O range 0xce00-0xce03: in range map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled pcib2: requested I/O range 0xcd00-0xcd07: in range map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled pcib2: requested I/O range 0xcc00-0xcc03: in range map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled pcib2: requested I/O range 0xcb00-0xcb0f: in range map[24]: type Memory, range 32, base 0xfddfe000, size 13, enabled pcib2: requested memory range 0xfddfe000-0xfddfffff: good pcib0: matched entry for 0.7.INTA (src \_SB_.PCI0.APC6:0) pci_link25: Picked IRQ 16 with weight 4 pcib0: slot 7 INTA routed to irq 16 via \_SB_.PCI0.APC6 pcib2: slot 0 INTA is routed to irq 16 atapci0: <JMicron JMB360 SATA300 controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfddfe000-0xfddfffff irq 16 at device 0.0 on pci2 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfddfe000 atapci0: AHCI Version 01.00 controller with 1 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect status=00000000 ata2: ahci_reset devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at device 11.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.APCF:0) pci_link28: Picked IRQ 20 with weight 1 pcib0: slot 11 INTA routed to irq 20 via \_SB_.PCI0.APCF ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 11.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.APCL:0) pci_link36: Picked IRQ 21 with weight 1 pcib0: slot 11 INTB routed to irq 21 via \_SB_.PCI0.APCL ioapic0: routing intpin 21 (PCI IRQ 21) to vector 51 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci1: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device 13.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfd00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53 ata1: [MPSAFE] ata1: [ITHREAD] atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf800-0xf80f mem 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf800 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 ata3: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] atapci3: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf300-0xf30f mem 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf300 atapci3: [MPSAFE] atapci3: [ITHREAD] atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 ata5: <ATA channel 0> on atapci3 atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata5: SATA connect status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 1> on atapci3 atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata6: SATA connect status=00000000 ata6: [MPSAFE] ata6: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xd000-0xdfff pcib3: memory decode 0xfdf00000-0xfdffffff pcib3: prefetched decode 0xfde00000-0xfdefffff pcib3: Subtractively decoded bridge. pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x1106, dev=0x3044, revid=0xc0 domain=0, bus=3, slot=8, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=255 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdfff000, size 11, enabled pcib3: requested memory range 0xfdfff000-0xfdfff7ff: good map[14]: type I/O Port, range 32, base 0xdf00, size 7, enabled pcib3: requested I/O range 0xdf00-0xdf7f: in range fwohci0: <VIA Fire II (VT6306)> port 0xdf00-0xdf7f mem 0xfdfff000-0xfdfff7ff at device 8.0 on pci3 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdfff000 pcib3: matched entry for 3.8.INTA (src \_SB_.PCI0.APC3:0) pci_link22: Picked IRQ 18 with weight 0 pcib3: slot 8 INTA routed to irq 18 via \_SB_.PCI0.APC3 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 54 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:01:68:23:10 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:68:23:10 fwe0: bpf attached fwe0: Ethernet address: 02:11:d8:68:23:10 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:11:d8:00:01:68:23:10 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xb825e0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci0: <multimedia> at device 16.1 (no driver attached) nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xf200-0xf207 mem 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1d:60:0c:17:71 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55 nfe0: [MPSAFE] nfe0: [FILTER] acpi_tz0: <Thermal Zone> on acpi0 sio0: irq maps: 0xcc21 0xcc31 0xcc21 0xcc21 sio0: irq maps: 0xcc21 0xcc31 0xcc21 0xcc21 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 07 03 c8 psm: status 07 03 c8 psm: status 07 03 c8 psm: data c8 c2 38 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model MouseMan+, device ID 0-38, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:08, syncbits:00 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd7fff,0xd8000-0xd9fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ioapic0: routing intpin 7 (ISA IRQ 7) to vector 59 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xcc21 0xcc21 0xcc21 0xcc21 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 133530 -> 100000 procfs registered lapic: Divisor 2, Frequency 166667996 hz Timecounter "TSC" frfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) equency 2333351867 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. md0: Preloaded image </boot/mfsroot> 9437184 bytes at 0xc0d237e0 ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=58 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reinit done .. ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=58 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: reinit done .. (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ata3: reiniting channel .. ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=58 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: reinit done .. ata3: reiniting channel .. ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=58 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: reinit done .. ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 7 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad0s1a Trying to mount root from ufs:/dev/md0 start_init: trying /sbin/init --Boundary-01=_N2hKHZAYVDEsOTi Content-Type: text/plain; charset="us-ascii"; name="boot_v.noacpi" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="boot_v.noacpi" GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000001400000 SMAP type=02 base=00000000f0000000 len=0000000002000000 SMAP type=03 base=000000007fef3000 len=000000000000d000 SMAP type=04 base=000000007fef0000 len=0000000000003000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=01 base=0000000000100000 len=000000007fdf0000 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA1 #5: Thu Nov 1 18:21:33 CET 2007 mlaier@c2d.laiers.local:/usr/src/sys/i386/compile/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1625000. Preloaded mfs_root "/boot/mfsroot" at 0xc1625180. Calibrating clock(s) ... i8254 clock: 1193185 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2333352679 Hz CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2333.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 2146369536 (2046 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001828000 - 0x000000007daa4fff, 2082983936 bytes (508541 pages) avail memory = 2082459648 (1985 MB) MP Configuration Table version 1.4 found at 0xc00f1400 APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) SMP: Added CPU 1 (AP) MPTable: <OEM00000 PROD00000000> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fb430 bios32: Entry = 0xfba10 (c00fba10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xba40 pnpbios: Found PnP BIOS data at 0xc00fc5e0 pnpbios: Entry = f0000:c610 Rev = 1.0 Other BIOS signatures found: ioapic0: Changing APIC ID to 4 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 10 bus PCI ioapic0: intpin 10 trigger: level ioapic0: intpin 10 polarity: low ioapic0: intpin 11 bus PCI ioapic0: intpin 11 trigger: level ioapic0: intpin 11 polarity: low ioapic0: intpin 5 bus PCI ioapic0: intpin 5 trigger: level ioapic0: intpin 5 polarity: low ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing ExtINT -> LINT0 lapic: Routing NMI -> LINT1 ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Nov 1 2007 18:21:22) npx0: INT 16 interface cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1 on motherboard est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pci_open(1): mode 1 addr port (0x0cf8) is 0x80006804 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03a310de) pcibios: BIOS version 3.00 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x03a3, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ac, revid=0xa1 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03aa, revid=0xa1 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03a9, revid=0xa1 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ab, revid=0xa1 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03a8, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0004, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b5, revid=0xa1 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b4, revid=0xa1 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ad, revid=0xa1 domain=0, bus=0, slot=1, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ae, revid=0xa1 domain=0, bus=0, slot=1, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03af, revid=0xa1 domain=0, bus=0, slot=1, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b0, revid=0xa1 domain=0, bus=0, slot=1, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b1, revid=0xa1 domain=0, bus=0, slot=1, func=4 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b2, revid=0xa1 domain=0, bus=0, slot=1, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b3, revid=0xa1 domain=0, bus=0, slot=1, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b6, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03bc, revid=0xa1 domain=0, bus=0, slot=2, func=1 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03ba, revid=0xa1 domain=0, bus=0, slot=2, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x03b7, revid=0xa1 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x03bb, revid=0xa1 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x1c00, size 6, enabled map[24]: type I/O Port, range 32, base 0x1c80, size 6, enabled pcib0: slot 10 INTA routed to irq 10 found-> vendor=0x10de, dev=0x0272, revid=0xa3 domain=0, bus=0, slot=10, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled pcib0: slot 11 INTA routed to irq 11 found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled pcib0: slot 11 INTB routed to irq 10 found-> vendor=0x10de, dev=0x0265, revid=0xa1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xfd00, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xa1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled map[18]: type I/O Port, range 32, base 0x970, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled map[20]: type I/O Port, range 32, base 0xf800, size 4, enabled map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: slot 14 INTA routed to irq 11 found-> vendor=0x10de, dev=0x0267, revid=0xa1 domain=0, bus=0, slot=15, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled map[18]: type I/O Port, range 32, base 0x960, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled map[20]: type I/O Port, range 32, base 0xf300, size 4, enabled map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled pcib0: slot 15 INTA routed to irq 10 found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled pcib0: slot 16 INTB routed to irq 11 found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled map[14]: type I/O Port, range 32, base 0xf200, size 3, enabled pcib0: slot 20 INTA routed to irq 5 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) pci0: <memory, RAM> at device 2.1 (no driver attached) pci0: <memory, RAM> at device 2.2 (no driver attached) pcib1: <MPTable PCI-PCI bridge> at device 3.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfa000000-0xfcffffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0391, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled pcib1: requested memory range 0xfb000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xef00, size 7, enabled pcib1: requested I/O range 0xef00-0xef7f: in range pcib1: slot 0 INTA routed to irq 10 vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 10 at device 0.0 on pci1 pcib2: <MPTable PCI-PCI bridge> at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfdc00000-0xfdcfffff pci2: <PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x197b, dev=0x2360, revid=0x02 domain=0, bus=2, slot=0, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled pcib2: requested I/O range 0xcf00-0xcf07: in range map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled pcib2: requested I/O range 0xce00-0xce03: in range map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled pcib2: requested I/O range 0xcd00-0xcd07: in range map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled pcib2: requested I/O range 0xcc00-0xcc03: in range map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled pcib2: requested I/O range 0xcb00-0xcb0f: in range map[24]: type Memory, range 32, base 0xfddfe000, size 13, enabled pcib2: requested memory range 0xfddfe000-0xfddfffff: good pcib2: slot 0 INTA routed to irq 11 atapci0: <JMicron JMB360 SATA300 controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfddfe000-0xfddfffff irq 11 at device 0.0 on pci2 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00 ioapic0: routing intpin 11 (PCI IRQ 11) to vector 48 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfddfe000 atapci0: AHCI Version 01.00 controller with 1 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect status=00000000 ata2: ahci_reset devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 11 at device 11.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 10 at device 11.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 ioapic0: routing intpin 10 (PCI IRQ 10) to vector 49 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: waiting for BIOS to give up control usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci1: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device 13.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfd00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] ata1: [ITHREAD] atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf800-0xf80f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf800 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 ata3: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] atapci3: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf300-0xf30f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0 atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf300 atapci3: [MPSAFE] atapci3: [ITHREAD] atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 ata5: <ATA channel 0> on atapci3 atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata5: SATA connect status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 1> on atapci3 atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata6: SATA connect status=00000000 ata6: [MPSAFE] ata6: [ITHREAD] pcib3: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xd000-0xdfff pcib3: memory decode 0xfdf00000-0xfdffffff pcib3: prefetched decode 0xfde00000-0xfdefffff pcib3: Subtractively decoded bridge. pci3: <PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x1106, dev=0x3044, revid=0xc0 domain=0, bus=3, slot=8, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdfff000, size 11, enabled pcib3: requested memory range 0xfdfff000-0xfdfff7ff: good map[14]: type I/O Port, range 32, base 0xdf00, size 7, enabled pcib3: requested I/O range 0xdf00-0xdf7f: in range pcib3: slot 8 INTA routed to irq 11 fwohci0: <VIA Fire II (VT6306)> port 0xdf00-0xdf7f mem 0xfdfff000-0xfdfff7ff irq 11 at device 8.0 on pci3 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdfff000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:01:68:23:10 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xb825e0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:68:23:10 fwe0: bpf attached fwe0: Ethernet address: 02:11:d8:68:23:10 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:11:d8:00:01:68:23:10 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci0: <multimedia> at device 16.1 (no driver attached) nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xf200-0xf207 mem 0xfe02b000-0xfe02bfff irq 5 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1d:60:0c:17:71 ioapic0: routing intpin 5 (PCI IRQ 5) to vector 52 nfe0: [MPSAFE] nfe0: [FILTER] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 13 devices, largest 92 bytes PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x83, size=0x3, align=0 PNP0200: adding io range 0x87-0x87, size=0x1, align=0 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 4 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xda000-0xdbfff, size=0x2000 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0x290-0x29f, size=0x10, align=0 PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 10 device ID PNP0f13 (130fd041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 PNP0400: adding io range 0x778-0x77f, size=0x8, align=0 pnpbios: handle 13 device ID PNP0400 (0004d041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd7fff,0xd8000-0xd9fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 07 03 c8 psm: status 07 03 c8 psm: status 07 03 c8 psm: data c8 c2 38 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 54 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model MouseMan+, device ID 0-38, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:08, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 55 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: irq maps: 0xc001 0xc011 0xc001 0xc001 sio0: irq maps: 0xc001 0xc011 0xc001 0xc001 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xc001 0xc001 0xc001 0xc001 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0 unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 pnpid PNP0f13 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0 unknown: <PNP0400> can't assign resources (port) unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0 Device configuration finished. Reducing kern.maxvnodes 133530 -> 100000 procfs registered lapic: Divisor 2, Frequency 166668054 hz Timecounter "TSC" frfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) equency 2333352679 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. md0: Preloaded image </boot/mfsroot> 9437184 bytes at 0xc0d237e0 ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=58 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reinit done .. ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=58 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: reinit done .. ata3: reiniting channel .. ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=58 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: reinit done .. ata3: reiniting channel .. ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=58 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: reinit done .. (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning PCI IRQ 5 to local APIC 0 ioapic0: Assigning ISA IRQ 7 to local APIC 1 ioapic0: Assigning PCI IRQ 10 to local APIC 0 ioapic0: Assigning PCI IRQ 11 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 0 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad0s1a Trying to mount root from ufs:/dev/md0 start_init: trying /sbin/init --Boundary-01=_N2hKHZAYVDEsOTi-- --nextPart3828379.rAXiEC845h Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQBHKh2SXyyEoT62BG0RAlTBAJ0QiTXti9rqxJ+gmfPb0bRvxVPSTgCfdkk2 ZUBZ67JOsc9J0AZpUc89F+0= =F5MX -----END PGP SIGNATURE----- --nextPart3828379.rAXiEC845h--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200711011940.18510.max>