Date: Wed, 10 May 2006 21:07:41 +0200 From: "Daniel A." <ldrada@gmail.com> To: freebsd-questions@freebsd.org Subject: 6.1 hangs at boot, sata raid controller unsupported? Message-ID: <5ceb5d550605101207l5a5cde40u17bca5c0638017e6@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
------=_Part_1814_33170377.1147288061015 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I have had this problem since I tried to install 6.0 on my desktop workstation, and even in 6.1, which has improved SATA RAID support, it persists. Original thread: http://lists.freebsd.org/pipermail/freebsd-questions/2006-April/118272.html Problem: FreeBSD hangs when it detects my 120GB Seagate Barracuda drive, attached alone to my onboard Promise FastTrak 376 controller. Everything works perfectly in Windows. No errors, no problems. FreeBSD will only boot in Safe Mode, and then it gives me this: ... ad8: 114473MB <Seagate ST3120022A 3.06> at ata4-master PIO4 ad8: FAILURE - READ timed out LBA=3D234441585 ad8: TIMEOUT - READ retrying (1 retry left) LBA=3D0 ad8: FAILURE - READ timed out LBA=3D234441631 ad8: TIMEOUT - READ retrying (0 retries left) LBA=3D0 ad8: FAILURE - READ timed out LBA=3D234441644 ad8: FAILURE - READ timed out LBA=3D0 ad8: FAILURE - READ timed out LBA=3D234441585 ad8: TIMEOUT - READ retrying (1 retry left) LBA=3D0 ... When booting in non-safemode, it just hangs forever at the first line I pas= ted. I've attached my old dmesg.boot from 6.0. Please help. I love FreeBSD and I would be endlessly happy if I could get it on my desktop. =3D/ ------=_Part_1814_33170377.1147288061015 Content-Type: application/octet-stream; name=dmesg.boot Content-Transfer-Encoding: 7bit X-Attachment-Id: f_en21n6w6 Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.10-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 1073725440 (1023 MB) avail memory = 1041833984 (993 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <SiS 648 host to AGP bridge> mem 0xb0000000-0xb7ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 fwohci0: <SiS 7007> mem 0xae800000-0xae800fff at device 2.3 on pci0 $PIR: ROUTE_INTERRUPT failed. fwohci0: Could not allocate irq device_attach: fwohci0 attach returned 6 atapci0: <SiS 963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa400-0xa40f irq 11 at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xae000000-0xae000fff irq 9 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xad800000-0xad800fff irq 9 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xad000000-0xad000fff irq 9 at device 3.2 on pci0 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xac800000-0xac800fff at device 3.3 on pci0 $PIR: ROUTE_INTERRUPT failed. ehci0: Could not allocate irq device_attach: ehci0 attach returned 6 sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xac000000-0xac000fff at device 4.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:e0:18:b0:e3:5b pci0: <multimedia, audio> at device 13.0 (no driver attached) atapci1: <Promise PDC20376 SATA150 controller> port 0x8000-0x803f,0x7800-0x780f,0x7400-0x747f mem 0xab800000-0xab800fff,0xab000000-0xab01ffff irq 11 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ata4: <ATA channel 2> on atapci1 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd3fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1 Timecounter "TSC" frequency 2400098696 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <Seagate ST380021A 3.19> at ata0-master PIO4 ad1: 76319MB <Seagate ST380021A 3.19> at ata0-slave PIO4 acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata1-master PIO4 ad8: 114473MB <Seagate ST3120022A 3.06> at ata4-master PIO4 ad8: FAILURE - READ timed out LBA=234441585 ad8: TIMEOUT - READ retrying (1 retry left) LBA=0 ad8: FAILURE - READ timed out LBA=234441631 ad8: TIMEOUT - READ retrying (0 retries left) LBA=0 ad8: FAILURE - READ timed out LBA=234441644 ad8: FAILURE - READ timed out LBA=0 ad8: FAILURE - READ timed out LBA=234441585 ad8: TIMEOUT - READ retrying (1 retry left) LBA=0 Trying to mount root from ufs:/dev/ad1s1a ------=_Part_1814_33170377.1147288061015--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5ceb5d550605101207l5a5cde40u17bca5c0638017e6>