From owner-freebsd-questions Mon Nov 6 22:59:44 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id WAA05790 for questions-outgoing; Mon, 6 Nov 1995 22:59:44 -0800 Received: from karon.dynas.se (karon.dynas.se [192.71.43.4]) by freefall.freebsd.org (8.6.12/8.6.6) with SMTP id WAA05785 for ; Mon, 6 Nov 1995 22:59:42 -0800 Received: from spirit.dynas.se by karon.dynas.se with smtp (Smail3.1.28.1 #5) id m0tCi0S-000EUPC; Tue, 7 Nov 95 07:59:40 +0100 Received: by spirit.dynas.se (Smail3.1.28.1 #32) id m0tCi0S-000JfEC; Tue, 7 Nov 95 07:59:40 +0100 Date: Tue, 7 Nov 1995 07:59:40 +0100 (MET) From: Peter Rostin To: freebsd-questions@freefall.freebsd.org Subject: Using BNC on 3com589B PCMCIA Etherlink III combo Message-ID: MIME-Version: 1.0 Content-Type: Text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: Quoted-Printable Sender: owner-questions@FreeBSD.org Precedence: bulk (message resent, first got mangled...) Have any one succeeded in using the BNC connector on this device? There seems to be code in if_zp.c to handle this but it doesn't look complete (comments in the code about where the connector is selected and then set to a constant). It looks like link0 is supposed to mean something there but I don't know. I have no problem using the 10baseT connector (or using either connector= on DOS). It doesn't seem to matter how the card is configured in the DOS config program for the card. I'm using FreeBSD2.0.5 but I also checked current for this. --=20 Peter R=F6stin Email: russin@dynas.s= e DynaSoft, Dynamic Software AB Phone: +46-8-615 84 00 Address: Hammarby Fabriksv 13, Box 92058 Fax: +46-8-641 92 00 Address: S-120 06 STOCKHOLM, SWEDEN