Date: Tue, 28 Nov 2006 18:10:21 GMT From: "Timofey Andreewski" <timofey@cardio.ru> To: freebsd-i386@FreeBSD.org Subject: Re: i386/78929: atapicam prevents boot, system hangs Message-ID: <200611281810.kASIALdw086949@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/78929; it has been noted by GNATS. From: "Timofey Andreewski" <timofey@cardio.ru> To: bug-followup@freebsd.org, harrycoin@quietfountain.com Cc: Subject: Re: i386/78929: atapicam prevents boot, system hangs Date: Tue, 28 Nov 2006 21:05:16 +0300 I have almost similar trouble with ATAPICAM under FreeBSD 6.2-PRERELEASE But it take place on computer with ARECA ARC1220 and NEC ND-4571A devices. This trouble absent on the second computer with same version of operating system, but without any additional devices except HDDs. ás an experiment I tried to load atapicam.ko with kldload after logon as root. At first my OS worked normally for few minutes, and after this it hanged up. Entirely. dmesg (without atapicam): Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2133.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2147418112 (2047 MB) avail memory = 2091831296 (1994 MB) ACPI APIC Table: <GBT AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard netsmb_dev: loaded acpi0: <GBT AWRDACPI> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <GeForce 7300 LE> mem 0xe4000000-0xe4ffffff,0xd0000000-0xdfffffff,0xe5000000-0xe5ffffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] uhci0: <UHCI (generic) USB controller> port 0xd000-0xd01f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xeb504000-0xeb5043ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 0.0 on pci2 pci3: <PCI bus> on pcib3 arcmsr0: <ARECA ARC1220 PCI-EXPRESS 8 PORTS SATA RAID CONTROLLER (RAID6-ENGINE Inside) Driver Version 1.20.00.02> mem 0xe8000000-0xe8000fff,0xeb000000-0xeb3fffff irq 18 at device 14.0 on pci3 arcmsr0: [GIANT-LOCKED] pcib4: <PCI-PCI bridge> at device 0.2 on pci2 pci4: <PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port 0x8000-0x80ff mem 0xea000000-0xea003fff irq 16 at device 0.0 on pci5 myk0: Ethernet address: 00:16:e6:5a:ff:72 pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci6: <ACPI PCI bus> on pcib6 atapci0: <JMicron JMB363 SATA300 controller> port 0x9000-0x9007,0x9400-0x9403,0x9800-0x9807,0x9c00-0x9c03,0xa000-0xa00f mem 0xeb400000-0xeb401fff irq 17 at device 0.0 on pci6 atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 uhci2: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xeb505000-0xeb5053ff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <EHCI (generic) USB 2.0 controller> on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcm0: <Creative EMU10K1> port 0xb000-0xb01f irq 19 at device 1.0 on pci7 pcm0: <SigmaTel STAC9708/11 AC97 Codec> isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH8 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH8 SATA300 controller> port 0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe80f,0xec00-0xec0f irq 19 at device 31.5 on pci0 ata5: <ATA channel 0> on atapci2 ata6: <ATA channel 1> on atapci2 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 194479MB <Maxtor 6L200M0 BANC1G10> at ata0-master SATA150 acd0: DVDR <NEC DVD RW ND-4571A/1-01> at ata4-master UDMA33 Waiting 5 seconds for SCSI devices to settle da0 at arcmsr0 bus 0 target 0 lun 0 da0: <Areca ARC-1220-VOL#00 R001> Fixed Direct Access SCSI-3 device da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled da0: 915527MB (1874999808 512 byte sectors: 255H 63S/T 116713C) SMP: AP CPU #1 Launched! pmc: Unknown Intel CPU.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200611281810.kASIALdw086949>