Date: Fri, 19 Feb 1999 00:15:13 -0800 From: Charlie Root <drews@UCSD.Edu> To: freebsd-questions@FreeBSD.ORG Subject: Kernel Compile Failure Message-ID: <36CD1D90.898AAD18@ucsd.edu>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------05ECE6E8A5D83C41742D50BA Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Here is my kernel configuration file that causes an ERROR code 1 stop when i run make from /usr/src/sys/compile/DREW Any suggestions greatly appreciated. I am trying to set up IP masquerading with this machine. --------------05ECE6E8A5D83C41742D50BA Content-Type: text/plain; charset=us-ascii; name="DREW" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="DREW" # # CX166100 Custom Kernel for cx166100-a ip masquerading # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: CX166100,v 1.143.2.2.1 1999/02/18 22:11:07 des Exp $ machine "i386" cpu "I686_CPU" ident DREW maxusers 32 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, "NFS" req'ed #options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem #options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative #options EXT2FS # Allow mounting Linux file systems options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options IPFIREWALL options IPDIVERT config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller eisa0 controller pci0 # Sound Support controller snd0 device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device op10 at isa? port 0x388 conflicts controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? #controller aic0 at isa? port 0x340 bio irq 11 controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? net irq 7 controller ppbus0 device nlpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ax0 device de0 #device fxp0 #device mx0 #device pn0 #device rl0 #device tl0 #device tx0 #device vr0 #device vx0 #device wb0 #device xl0 device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker # IBM BASIC-style noises through PC speaker # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 2 #Berkeley packet filter # USB support #controller uhci0 #controller ohci0 #controller usb0 # # for the moment we have to specify the priorities of the device # drivers explicitly by the ordering in the list below. This will # be changed in the future. # #device ums0 #device ukbd0 #device ulpt0 #device uhub0 #device ucom0 #device umodem0 #device hid0 #device ugen0 # #options USB_DEBUG #options USBVERBOSE --------------05ECE6E8A5D83C41742D50BA-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36CD1D90.898AAD18>