Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 May 2012 01:51:12 +0000 (UTC)
From:      Glen Barber <gjb@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-9@freebsd.org
Subject:   svn commit: r235586 - in stable/9: lib/libutil sbin/hastd sbin/iscontrol share/man/man5 usr.sbin/ntp/doc usr.sbin/wpa/hostapd usr.sbin/wpa/wpa_supplicant
Message-ID:  <201205180151.q4I1pCGP028294@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: gjb (doc committer)
Date: Fri May 18 01:51:12 2012
New Revision: 235586
URL: http://svn.freebsd.org/changeset/base/235586

Log:
  MFC r235337:
  
  General mdoc(7) and typo fixes.
  
  PR:		167804

Modified:
  stable/9/lib/libutil/login.conf.5
  stable/9/sbin/hastd/hast.conf.5
  stable/9/sbin/iscontrol/iscsi.conf.5
  stable/9/share/man/man5/device.hints.5
  stable/9/share/man/man5/make.conf.5
  stable/9/share/man/man5/nsmb.conf.5
  stable/9/share/man/man5/portsnap.conf.5
  stable/9/share/man/man5/rc.conf.5
  stable/9/usr.sbin/ntp/doc/ntp.conf.5
  stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5
  stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5
Directory Properties:
  stable/9/lib/libutil/   (props changed)
  stable/9/sbin/hastd/   (props changed)
  stable/9/sbin/iscontrol/   (props changed)
  stable/9/share/man/man5/   (props changed)
  stable/9/usr.sbin/ntp/   (props changed)
  stable/9/usr.sbin/wpa/   (props changed)
  stable/9/usr.sbin/wpa/wpa_supplicant/   (props changed)

Modified: stable/9/lib/libutil/login.conf.5
==============================================================================
--- stable/9/lib/libutil/login.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/lib/libutil/login.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -209,7 +209,8 @@ value.
 The syntax is the same as for the
 .Fl l
 argument of
-.Xr cpuset 1 or the word
+.Xr cpuset 1
+or the word
 .Ql default .
 If set to
 .Ql default

Modified: stable/9/sbin/hastd/hast.conf.5
==============================================================================
--- stable/9/sbin/hastd/hast.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/sbin/hastd/hast.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -37,7 +37,7 @@
 .Xr hastd 8
 daemon and the
 .Xr hastctl 8
-utility.
+utility
 .Sh DESCRIPTION
 The
 .Nm
@@ -439,7 +439,7 @@ resource tank {
 .Xr gethostname 3 ,
 .Xr geom 4 ,
 .Xr hastctl 8 ,
-.Xr hastd 8 .
+.Xr hastd 8
 .Sh AUTHORS
 The
 .Nm

Modified: stable/9/sbin/iscontrol/iscsi.conf.5
==============================================================================
--- stable/9/sbin/iscontrol/iscsi.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/sbin/iscontrol/iscsi.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -76,7 +76,7 @@ currently only 1.
 is the name by which the target is known, not to be confused with
 target address, either obtained via the target administrator, or
 from a
-.Em discovery session.
+.Em discovery session .
 .It Cm InitiatorName
 if not specified, defaults to
 .Sy iqn.2005-01.il.ac.huji.cs:
@@ -146,7 +146,7 @@ see
 This value can only be reduced.
 .It Cm sockbufsize
 sets the receiver and transmitter socket buffer size to
-.Em size,
+.Em size ,
 in kilobytes.
 The default is 128.
 .El

Modified: stable/9/share/man/man5/device.hints.5
==============================================================================
--- stable/9/share/man/man5/device.hints.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/share/man/man5/device.hints.5	Fri May 18 01:51:12 2012	(r235586)
@@ -162,7 +162,7 @@ hint.acpi.0.disabled="1"
 .Xr kenv 1 ,
 .Xr loader.conf 5 ,
 .Xr loader 8 ,
-.Xr resource_int_value 9 .
+.Xr resource_int_value 9
 .Sh HISTORY
 The
 .Nm

Modified: stable/9/share/man/man5/make.conf.5
==============================================================================
--- stable/9/share/man/man5/make.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/share/man/man5/make.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -575,7 +575,7 @@ files at build time.
 The value should include the full path to the
 .Pa .mc
 file(s), e.g.,
-.Pa /etc/mail/foo.mc
+.Pa /etc/mail/foo.mc ,
 .Pa /etc/mail/bar.mc .
 .It Va SENDMAIL_ALIASES
 .Pq Vt str

Modified: stable/9/share/man/man5/nsmb.conf.5
==============================================================================
--- stable/9/share/man/man5/nsmb.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/share/man/man5/nsmb.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -96,7 +96,6 @@ Possible keywords may include:
 .Bl -tag -width ".Pa /etc/nsmb.conf"
 .It Pa /etc/nsmb.conf
 The default remote mount-point configuration file.
-.Pa "~/nsmb.conf"
 .It Pa ~/nsmb.conf
 The user specific remote mount-point configuration file.
 .El

Modified: stable/9/share/man/man5/portsnap.conf.5
==============================================================================
--- stable/9/share/man/man5/portsnap.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/share/man/man5/portsnap.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -47,7 +47,8 @@ specifies the source from which snapshot
 This is equivalent to the
 .Fl s Ar server
 option to
-.Xr portsnap 8 , and will be ignored if the command-line
+.Xr portsnap 8 ,
+and will be ignored if the command-line
 option is used.
 .Pp
 A line of the form
@@ -58,7 +59,8 @@ belonging to an RSA keypair which is tru
 This is equivalent to the
 .Fl k Ar KEY
 option to
-.Xr portsnap 8 , and will be ignored if the command-line
+.Xr portsnap 8 ,
+and will be ignored if the command-line
 option is used.
 .Pp
 A line of the form
@@ -68,7 +70,8 @@ snapshot of the ports tree.
 This is equivalent to the
 .Fl d Ar workdir
 option to
-.Xr portsnap 8 , and will be ignored if the command-line option
+.Xr portsnap 8 ,
+and will be ignored if the command-line option
 is used.
 .Pp
 A line of the form
@@ -82,7 +85,8 @@ commands.
 This is equivalent to the
 .Fl p Ar portsdir
 option to
-.Xr portsnap 8 , and will be ignored if the command-line option
+.Xr portsnap 8 ,
+and will be ignored if the command-line option
 is used.
 .Pp
 If more than one line of any of the above forms is included in

Modified: stable/9/share/man/man5/rc.conf.5
==============================================================================
--- stable/9/share/man/man5/rc.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/share/man/man5/rc.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -386,7 +386,7 @@ is used to set the hostname via DHCP,
 this variable should be set to an empty string.
 If this value remains unset when the system is done booting
 your console login will display the default hostname of
-.Dq Amnesiac.
+.Dq Amnesiac .
 .It Va nisdomainname
 .Pq Vt str
 The NIS domain name of this host, or
@@ -1299,6 +1299,7 @@ ifconfig_ed0_name="net0"
 ifconfig_net0="inet 192.0.2.1 netmask 0xffffff00"
 .Ed
 .It Va ipv6_enable
+.Pq Vt bool
 This variable is deprecated.
 Use
 .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6
@@ -1306,7 +1307,6 @@ and
 .Va ipv6_activate_all_interfaces
 if necessary.
 .Pp
-.Pq Vt bool
 If the variable is
 .Dq Li YES ,
 .Dq Li inet6 accept_rtadv
@@ -1317,12 +1317,12 @@ and the
 is defined as
 .Dq Li YES .
 .It Va ipv6_prefer
+.Pq Vt bool
 This variable is deprecated.
 Use
 .Va ip6addrctl_policy
 instead.
 .Pp
-.Pq Vt bool
 If the variable is
 .Dq Li YES ,
 the default address selection policy table set by
@@ -3273,9 +3273,10 @@ is enabled, and a
 daemon is started for a non-default port, the
 .Va "moused_" Ns Ar XXX Ns Va "_flags"
 set of options has precedence over and replaces the default
-.Va moused_flags (where
+.Va moused_flags
+(where
 .Ar XXX
-is the name of the non-default port, i.e.\&
+is the name of the non-default port, i.e.,\&
 .Ar ums0 ) .
 By setting
 .Va "moused_" Ns Ar XXX Ns Va "_flags"

Modified: stable/9/usr.sbin/ntp/doc/ntp.conf.5
==============================================================================
--- stable/9/usr.sbin/ntp/doc/ntp.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/usr.sbin/ntp/doc/ntp.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -268,7 +268,7 @@ Options:
 All packets sent to and received from the server or peer are to
 include authentication fields encrypted using the autokey scheme
 described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
 .It Cm burst
 when the server is reachable, send a burst of eight packets
 instead of the usual one.
@@ -305,7 +305,7 @@ default is to include no encryption fiel
 .It Cm minpoll Ar minpoll
 .It Cm maxpoll Ar maxpoll
 These options specify the minimum and maximum poll intervals
-for NTP messages, as a power of 2 in seconds
+for NTP messages, as a power of 2 in seconds.
 The maximum poll
 interval defaults to 10 (1,024 s), but can be increased by the
 .Cm maxpoll
@@ -363,7 +363,7 @@ Note that, in order
 to avoid accidental or malicious disruption in this mode, both the
 server and client should operate using symmetric-key or public-key
 authentication as described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
 .It Ic manycastserver Ar address ...
 This command enables reception of manycast client messages to
 the multicast group address(es) (type m) specified.
@@ -376,7 +376,7 @@ Note that, in order to avoid
 accidental or malicious disruption in this mode, both the server
 and client should operate using symmetric-key or public-key
 authentication as described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
 .It Ic multicastclient Ar address ...
 This command enables reception of multicast server messages to
 the multicast group address(es) (type m) specified.
@@ -389,7 +389,7 @@ Note that,
 in order to avoid accidental or malicious disruption in this mode,
 both the server and client should operate using symmetric-key or
 public-key authentication as described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
 .El
 .Sh Authentication Support
 Authentication support allows the NTP client to verify that the
@@ -466,7 +466,7 @@ of these checks and be discarded.
 Furthermore, the Autokey scheme requires a
 preliminary protocol exchange to obtain
 the server certificate, verify its
-credentials and initialize the protocol
+credentials and initialize the protocol.
 .Pp
 The
 .Cm auth
@@ -669,7 +669,7 @@ using the host name, network address and
 all of which are bound together by the protocol specifically
 to deflect masquerade attacks.
 For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
 computations and so the same addresses must be available
 at both the server and client.
 For this reason operation
@@ -796,7 +796,7 @@ The certificate extension fields must no
 a subject key identifier or a issuer key identifier field;
 however, an extended key usage field for a trusted host must
 contain the value
-.Cm trustRoot ; .
+.Cm trustRoot .
 Other extension fields are ignored.
 .Ss Authentication Commands
 .Bl -tag -width indent
@@ -1068,10 +1068,11 @@ following form to the file generation se
 The first two fields show the date (Modified Julian Day) and time
 (seconds and fraction past UTC midnight).
 The next field shows the peer
-address in dotted-quad notation, The final message field includes the
+address in dotted-quad notation.
+The final message field includes the
 message type and certain ancillary information.
 See the
-.Sx Authentication Options
+.Sx Authentication Commands
 section for further information.
 .It Cm loopstats
 Enables recording of loop filter statistics information.
@@ -1155,7 +1156,7 @@ Time in hours since the system was last 
 .It Packets received Cm 81965
 Total number of packets received.
 .It Packets processed Cm 0
-Number of packets received in response to previous packets sent
+Number of packets received in response to previous packets sent.
 .It Current version Cm 9546
 Number of packets matching the current NTP version.
 .It Previous version Cm 56
@@ -1461,7 +1462,7 @@ subcommand specifies the minimum average
 spacing, while the
 .Cm minimum
 subcommand specifies the minimum packet spacing.
-Packets that violate these minima are discarded
+Packets that violate these minimum are discarded
 and a kiss-o'-death packet returned if enabled.
 The default
 minimum average and minimum are 5 and 2, respectively.
@@ -1775,7 +1776,7 @@ It is often useful to narrow the range o
 servers which can be found by manycast client associations.
 Because manycast servers respond only when the client
 stratum is equal to or greater than the server stratum,
-primary (stratum 1) servers fill find only primary servers
+primary (stratum 1) servers will find only primary servers
 in TTL range, which is probably the most common objective.
 However, unless configured otherwise, all manycast clients
 in TTL range will eventually find all primary servers
@@ -1955,7 +1956,7 @@ peers remaining.
 This value defaults to 1, but can be changed
 to any number from 1 to 15.
 .It Cm minclock Ar minclock
-The clustering algorithm repeatedly casts out outlyer
+The clustering algorithm repeatedly casts out outerlayer
 associations until no more than
 .Cm minclock
 associations remain.
@@ -1965,7 +1966,7 @@ configured sources.
 .It Cm minsane Ar minsane
 This is the minimum number of candidates available
 to the clock selection algorithm in order to produce
-one or more truechimers for the clustering algorithm.
+one or more true chimers for the clustering algorithm.
 If fewer than this number are available, the clock is
 undisciplined and allowed to run free.
 The default is 1

Modified: stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5
==============================================================================
--- stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -172,7 +172,7 @@ This conversion uses SSID so the PSK cha
 used and the SSID is changed.
 .It Va wpa_psk_file
 Optionally, WPA PSKs can be read from a separate text file (containing a
-list of (PSK,MAC address) pairs.
+list of PSK,MAC address pairs).
 .It Va wpa_key_mgmt
 Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both).
 .It Va wpa_pairwise

Modified: stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5
==============================================================================
--- stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5	Fri May 18 01:50:34 2012	(r235585)
+++ stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5	Fri May 18 01:51:12 2012	(r235586)
@@ -316,7 +316,7 @@ This can be used to achieve forward secr
 If the
 .Va dh_file
 is in DSA parameters format, it will be automatically converted
-into DH params.
+into DH parameters.
 .It Va subject_match
 Substring to be matched against the subject of the
 authentication server certificate.
@@ -370,7 +370,7 @@ TLS Message Length field in all TLS mess
 fragmented.
 .It Li sim_min_num_chal=3
 can be used to configure EAP-SIM to require three
-challenges (by default, it accepts 2 or 3)
+challenges (by default, it accepts 2 or 3).
 .It Li fast_provisioning=1
 option enables in-line provisioning of EAP-FAST
 credentials (PAC).



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201205180151.q4I1pCGP028294>