Date: Thu, 14 Nov 2002 01:44:18 -0600 From: "E.S." <bsdterm@HotPOP.com> To: Kent Stewart <kstewart@owt.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: make buildkernel says device atapicam is unknown!!?? Message-ID: <200211140144.18808.bsdterm@HotPOP.com> In-Reply-To: <3DD34D9B.3010807@owt.com> References: <200211132359.26336.bsdterm@HotPOP.com> <3DD34D9B.3010807@owt.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Well, 4.7-RELEASE was released before Nov. 1, 2002 (on Oct. 10). As I understand it, 4.7-RELEASE is can be obtained by cvsup'ing to RELENG_4_7 (and generally the only patches that are applied to -RELEASE are security patches)... whereas if I cvsup'd to RELENG_4, *then* I would be getting 4.7-STABLE. But because I'm cvsup'ing to RELENG_4_7, not RELENG_4, I'm getting 4.7-RELEASE, not -STABLE... right? I may be wrong there; feel free to correct me if I am... :) In any case, I tried building the kernel before applying those patches, and after applying them. The output I quoted earlier is the same either way... -ES On Thursday 14 November 2002 01:15 am, Kent Stewart wrote: > E.S. wrote: > > I figured out my make buildworld problem I mentioned earlier (I'd > > uncommented NO_OPENSSL=true in my make.conf - big mistake!), and now that > > world builds OK, I'm having kernel build problems. > > > > I'm building 4.7-RELEASE (cvsup'ing to RELENG_4_7), and here's all the > > output for "make buildkernel KERNCONF=KERNELCONF4": > > > > -------------------------------------------------------------- > > > >>>>Kernel build for KERNELCONF4 started on Wed Nov 13 23:45:17 CST 2002 > > > > -------------------------------------------------------------- > > ===> KERNELCONF4 > > mkdir -p /usr/obj/usr/src/sys > > cd /usr/src/sys/i386/conf; > > PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/ob > >j/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin config -d > > /usr/obj/usr/src/sys/KERNELCONF4 KERNELCONF4 > > Don't forget to do a ``make depend'' > > Warning: device "atapicam" is unknown > > *** Error code 1 > > > > Stop in /usr/src. > > *** Error code 1 > > > > Stop in /usr/src. > > > > > > I've applied the following of Thomas Cuivre's atapicam patches (from > > http://www.cuivre.fr.eu.org/~thomas/atapicam/): > > > > atapicam-20021031.diff > > atapicam-STABLE-config-20021031.diff > > > > ...to source I cvsup'd today (Nov. 13). But I've had this same make > > error for the last several days... > > > > I have all the necessary devices and options in my KERNELCONF4 file that > > Cuivre notes on his atapicam page that we need, but the above is still my > > output. > > > > I *can* comment out "device atapicam" in my config file -- and the kernel > > appears to build OK (I haven't tried building a full kernel without > > atapicam support, I've only tested to see if removing "device atapicam" > > from the config file makes a difference) if I do that, but I really don't > > want to lose ATAPI burning support using cdrecord, etc... > > > > Anybody know what's going on here? Suggestions? > > > > I would post my KERNELCONF4 file, but this list cuts off my messages when > > they're some 200KB+ in size (I know, for bandwidth and spam, etc.)... > > I don't understand why you are doing part of this. The web page says > the atapicam device has been in 4.7-stable source since 1-nov-2002. It > sounds like you have basically applied the patch twice. All I did was > add "device atapicam" after my atapicd like so > > device atapicd # ATAPI CDROM drives > device atapicam > device atapifd # ATAPI floppy drives > > and did a make buildkernel. The kernel built without any errors. > > Kent To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200211140144.18808.bsdterm>