From owner-freebsd-current Tue Feb 10 03:53:53 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id DAA09202 for current-outgoing; Tue, 10 Feb 1998 03:53:53 -0800 (PST) (envelope-from owner-freebsd-current@FreeBSD.ORG) Received: from hub.org (hub.org [209.47.148.200]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id DAA09032; Tue, 10 Feb 1998 03:53:10 -0800 (PST) (envelope-from scrappy@hub.org) Received: from localhost (scrappy@localhost) by hub.org (8.8.8/8.7.5) with ESMTP id GAA29760; Tue, 10 Feb 1998 06:53:23 -0500 (EST) Date: Tue, 10 Feb 1998 06:53:22 -0500 (EST) From: The Hermit Hacker To: Søren Schmidt cc: freebsd-current@FreeBSD.ORG Subject: Re: ACER CD910E/JAS IDE CDrom... In-Reply-To: <199802100717.IAA01018@sos.freebsd.dk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 10 Feb 1998, Søren Schmidt wrote: > In reply to The Hermit Hacker who wrote: > > The problem is the '#' in front of all the lines in the section > "I had", you have effectively disabled any ata/atapi support :) > Or is this not an _exact_ copy of your config... Sorry, when I did config the system, the commented lines were what was uncommented, and the "And now have" didn't exist...if I had those lines commented out, my system wouldn't have booted, as its an IDE system :) > The CMD640 might very well be the help you needed... Okay, I'll try that out tonight then...see if taking it out re-breaks it... > > > Actually, not really the answer, but I did get it to work. I > > ended up downloading the boot.flp from the latest snapshot, then when that > > worked, building a GENERIC kernel...and when that worked, copied in > > anything that appeared pertinent...and now it works. > > > > I had: > > > > #controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x00ffa004 > > vector wdintr > > #disk wd0 at wdc0 drive 0 > > #disk wd1 at wdc0 drive 1 > > #options ATAPI #Enable ATAPI support for IDE bus > > #options ATAPI_STATIC #Don't do it as an LKM > > #device wcd0 #IDE CD-ROM > > > > And now have: > > > > options "CMD640" # work around CMD640 chip deficiency > > controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr > > disk wd0 at wdc0 drive 0 > > disk wd1 at wdc0 drive 1 > > > > #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr > > #disk wd2 at wdc1 drive 0 > > #disk wd3 at wdc1 drive 1 > > > > options ATAPI #Enable ATAPI support for IDE bus > > options ATAPI_STATIC #Don't do it as an LKM > > device wcd0 #IDE CD-ROM > > > > I haven't investigated further, yet, about whether the problem is > > the missing CMD640 or the flags setting on wdc0...before I go through > > that, does anyone know if either should affect it? If its something > > known, no reason to go and test it...:) > > > > Marc G. Fournier > > Systems Administrator @ hub.org > > primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org > > > > > > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Søren Schmidt (sos@FreeBSD.org) FreeBSD Core Team > Even more code to hack -- will it ever end > .. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe current" in the body of the message