Date: Sat, 20 Sep 2003 05:36:56 -0500 From: Derek Ragona <derek@computinginnovations.com> To: Soren Schmidt <sos@spider.deepcore.dk> Cc: freebsd-current@FreeBSD.ORG Subject: Re: SATA drive lock-up Message-ID: <5.2.1.1.2.20030920053435.012510b8@www.computinginnovations.com> In-Reply-To: <200309200807.h8K87j38049734@spider.deepcore.dk> References: <5.2.1.1.2.20030919151835.01308600@www.computinginnovations.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This was using the 9/18 snapshot, I tried to cvsup it to the most current,=
=20
but the drive errors prevent the update.
I just reloaded with the 9/19 snapshot, and will report if the error still=
=20
exists.
As for the hardware, it is all brand new hardware, and the system dual=20
boots, the other OS has no issues.
-Derek
At 10:07 AM 9/20/2003 +0200, Soren Schmidt wrote:
>It seems Derek Ragona wrote:
> > I have a single SATA drive on an Adaptec 1210SA card.
> >
> > The drive will give a write error warning a few times, then will=20
> repeatedly
> > give:
> > ad4: timeout sending command=3Dca
> >
> > The only recovery is the reset switch, reboot single-user fsck, and then
> > come back up in multiuser.
> >
> > These errors occur with disk access, but not with a predictable nature=
=20
> (not
> > on large files, or small files, etc.)
>
>And you are on an uptodate -current ?
>
>If so I'd suspect HW ...
>
>-S=F8ren
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.1.1.2.20030920053435.012510b8>