Date: Thu, 4 Nov 2004 16:55:30 +0100 (CET) From: Are Bryne <are.bryne@communique.no> To: FreeBSD Questions <questions@freebsd.org> Subject: Re: ad0: WRITE command timeout... Message-ID: <20041104164030.V3017@david.i.communique.no> In-Reply-To: <7cbadc8704110405434c734ae2@mail.gmail.com> References: <20041104141000.F3017@david.i.communique.no> <7cbadc8704110405434c734ae2@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. --0-1355040245-1099583602=:3017 Content-Type: TEXT/PLAIN; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8BIT Content-ID: <20041104165338.Q3017@david.i.communique.no> On Thu, 4 Nov 2004, Nelis Lamprecht wrote: > On Thu, 4 Nov 2004 14:10:42 +0100 (CET), Are Bryne > <are.bryne@communique.no> wrote: [...] >> After upgrading a computer from FreeBSD 4.8-something to 4.10-RELEASE-p3, >> I'm getting lots of the following: >> >> ad0: WRITE command timeout tag=0 serv=0 - resetting >> ata0: resetting devices .. done The disk in question is a FUJITSU MPC3043AT/6018 using ATA/ATAPI rev 3 according to atacontrol. It is master on its controller and uses UDMA33 transfers, and has an idle PIO4 cd-rom player as a slave. The controller is identified in dmesg as: atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0 [...] > Hi, > > Seen this once before and in my case it was a faulty hard drive cable. > Check to see whether your cable is not loose or incorrectly inserted > and perhaps try a new one. Thank you - I will check that. > It may also be caused by an incorrect DMA setting if memory serves me > correct. I might try turning DMA off to see if that helps... > Nelis Again, please CC me to make sure I see the whole thread. Regards, Are Bryne -- Communiqué DA Office: +47 22 44 33 99 Postboks 9050 Grønland Mobile: +47 900 22 009 NO-0133 Oslo URL: http://www.communique.no --0-1355040245-1099583602=:3017--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041104164030.V3017>