Date: Sat, 4 Feb 2006 11:14:47 -0500 (EST) From: Yasholomew Yashinski <yashy@mail.yashy.com> To: sparc64@freebsd.org Subject: vr(4) issue on Ultra 10 Message-ID: <20060204110201.W77754@mail.yashy.com>
next in thread | raw e-mail | index | archive | help
I'm intending to use a U10 as a firewall/gateway, so I'm trying to add
one of my spare PCI NICs, to use along with the hme0. Trying dc(4) brought
my OS down (writing another email), so I'm trying vr(4) which is flooding
dmesg/syslog with errors.
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::250:baff:feb4:4664%vr0 prefixlen 64 scopeid 0x5
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
ether 00:50:ba:b3:46:61
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
>From dmesg:
FreeBSD 6.0-STABLE #0: Thu Jan 19 19:07:25 EST 2006
yashy@proksie.yashy.com:/usr/obj/usr/src/sys/COLONEL
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "tick" frequency 440000000 Hz quality 1000
real memory = 536870912 (512 MB)
avail memory = 510935040 (487 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (440.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff
at
device 1.0 on pci1
auxio0: <Sun Auxiliary I/O> addr
0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x
140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f
irq 43
on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on
ebus0
uart2: keyboard (1200,n,8,1)
kbd0 at sunkbd0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on
ebus0
ebus0: <ecpp> addr
0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f
irq 34 (no driver attached)
ebus0: <fdthree> addr
0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003
irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80a50f01
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr
0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x
1400722000-0x1400722003 irq 35,36 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on
pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:a5:0f:01
hme0: [GIANT-LOCKED]
machfb0: <ATI 3D Rage Pro> mem 0xe1000000-0xe1ffffff,0xe2000000-0xe2000fff
at
device 2.0 on pci1
machfb0: console
machfb0: 16 MB aperture at 0xd5b4a000, 1 KB registers at 0xe17ffc00
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz, DSP
machfb0: resolution 1152x900 at 8 bpp
atapci0: <CMD 646 WDMA2 controller> port
0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020
-0xc0002f at device 3.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
pci2: <network, ethernet> at device 2.0 (no driver attached)
pci2: <mass storage, SCSI> at device 3.0 (no driver attached)
pci2: <mass storage, SCSI> at device 3.1 (no driver attached)
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x300>
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: 9541MB <WDC WD100BA 16.13M16> at ata2-master WDMA2
acd0: CDRW <LTN323/DQ19> at ata3-master PIO4
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
Trying to mount root from ufs:/dev/ad0a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x400-0x47f mem 0x2000-0x207f
at
device 2.0 on pci2
miibus1: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus1
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:b3:46:61
vr0: [GIANT-LOCKED]
vr0: link state changed to DOWN
vr0: link state changed to UP
vr0: watchdog timeout
vr0: watchdog timeout
vr0: watchdog timeout
vr0: watchdog timeout
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
<snip>
Thanks in Advance,
--
Yashy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060204110201.W77754>