Date: Thu, 19 Apr 2007 14:44:34 -0400 (EDT) From: Cam Baillie <cambaillie@yahoo.ca> To: freebsd-questions@freebsd.org Subject: gmirror - one provider won't activate Message-ID: <241216.99686.qm@web36907.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello,
I set up a RAID 1 duplex following the well-laid out OnLamp article. I had successfully synchronised both disks prior to rebooting. Then I rebooted and the ad3 disk wouldn't activate.
The system boots off of ad0 while slices within ad1 and ad3 are supposed to serve as the duplex. The duplex (/dev/mirror/gm0) mounts successfully to /usr/home so I have access to my data from ad1.
I am running 6.2-release. The dmesg and fstab files are attached.
Thank you!
Cam
---------------------------------
Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail
[-- Attachment #2 --]
Rebooting...
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Wed Mar 28 16:29:32 CDT 2007
root@server.shiner.ca:/usr/obj/usr/src/sys/SHINER
ACPI APIC Table: <DELL Flash >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (1993.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536608768 (511 MB)
avail memory = 519888896 (495 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL Flash> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 o
n pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xfeaff800-0xfeaff8ff ir
q 22 at device 10.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c0:a8:7b:f6:77
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 i
rq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1993544572 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380021A 3.10> at ata0-master UDMA100
ad1: 286168MB <Seagate ST3300631A 3.04> at ata0-slave UDMA100
acd0: CDRW <NEC CD-RW NR-7900A/1.08> at ata1-master UDMA33
ad3: 286168MB <Seagate ST3300631A 3.04> at ata1-slave UDMA100
GEOM_MIRROR: Device gm0 created (id=2536797825).
GEOM_MIRROR: Device gm0: provider ad1 detected.
GEOM_MIRROR: Device gm0: provider ad3 detected.
GEOM_MIRROR: Component ad3 (device gm0) broken, skipping.
GEOM_MIRROR: Device gm0: provider ad1 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
[-- Attachment #3 --]
# Device Mountpoint FStype Options Dump Pass#
/dev/ad0s1b none swap sw 0 0
/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1e /tmp ufs rw 2 2
/dev/ad0s1f /usr ufs rw 2 2
/dev/ad0s1d /var ufs rw 2 2
/dev/acd0 /cdrom cd9660 ro,noauto 0 0
/dev/mirror/gm0s1c /usr/home ufs rw 2 2
# Device Mountpoint FStype Options Dump Pass#
#/dev/ad0s1b none swap sw 0 0
#/dev/ad0s1a / ufs rw 1 1
#/dev/ad0s1e /tmp ufs rw 2 2
#/dev/ad0s1f /usr ufs rw 2 2
#/dev/ad0s1d /var ufs rw 2 2
#/dev/acd0 /cdrom cd9660 ro,noauto 0 0
#/dev/ad1s1c /usr/home ufs rw 2 2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?241216.99686.qm>