Date: Sat, 07 Oct 2006 16:46:36 +0200 From: Kai Gallasch <gallasch@free.de> To: freebsd-proliant@freebsd.org Subject: [Fwd: problem report amd64/97075: Panic, Trap 12 - anyone else?] Message-ID: <4527BDCC.1090601@free.de>
next in thread | raw e-mail | index | archive | help
Hi. Maybe of Interest to FreeBSD Proliant Users? I have some problems with a HP DL385 2xDC Opteron machine, running FreeBSD 6 STABLE with "kernel trap 12" panics. I looked through FreeBSD problem reports and found a pr amd64/97075 which looks if it's related to the panics on my server. So I mailed freebsd-amd64@freebsd.org, but didn't want to crosspost here. Has someone on the list had similar panics with their proliant(s) lately? Cheers, Kai. -------- Original-Nachricht -------- Betreff: problem report amd64/97075: Panic, Trap 12 - anyone else? Datum: Sat, 07 Oct 2006 14:21:57 +0200 Von: Kai Gallasch <gallasch@free.de> An: freebsd-amd64@freebsd.org FreeBSD problem report id 97075 http://www.freebsd.org/cgi/query-pr.cgi?pr=amd64/97075 Hi List. I have problems with a "kernel trap 12" kernel panic both under 6.1-STABLE FreeBSD 6.1-STABLE #0: Fri Aug 18 23:36:41 CEST 2006 and also on 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #0: Fri Oct 6 21:48:58 CEST 2006 Maybe this is related to problem report amd/97075 ? Someone experiencing the same problems? Cheers, --Kai. symptoms: --------- New server ran without any problems until we put some load on it by moving a mail system over to it. About once a week the server crashes and even serial console doesn't work any more. This is the output transcribed from the screen: --snip-- kernel trap 12 with interrupts disabled Fatal trap 12; page fault while in kernel mode cpuid = 2; apic id = 02 fault virtual address = 0x18c fault code = supervisor read, page not present instruction pointer = 0x8 : 0xffffffff8030a 157 stack pointer = 0x10 : 0xffffffffb5e1d8a0 frame pointer = 0x10 : 0x4 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor flags = resume, IOPL = 0 current process = 7693 (tcpserver) trap number = 12 panic : page fault cpuid = 2 Cannot dump. No dump device defined --snap-- The server hosts several jails. In the last two crashes always the process "tcpserver" was involved and noted in the crash output. This process not even runs under uid 0. hardware: --------- hp/compaq dl385, 2 x dual-core opteron, 4 GB memory dmesg output: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #0: Fri Oct 6 21:48:58 CEST 2006 houdini@geldkraft.free.de:/usr/obj/usr/src/sys/GELDKRAFT Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 280 (2405.47-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x2<CMP> Cores per package: 2 real memory = 4118773760 (3927 MB) avail memory = 3977547776 (3793 MB) ACPI APIC Table: <HP 00000083> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard ioapic3 <Version 1.1> irqs 32-35 on motherboard ioapic4 <Version 1.1> irqs 36-39 on motherboard kbd1 at kbdmux0 acpi0: <HP A05> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ohci0: <OHCI (generic) USB controller> mem 0xf7df0000-0xf7df0fff irq 19 at device 0.0 on pci1 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xf7de0000-0xf7de0fff irq 19 at device 0.1 on pci1 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci1: <base peripheral> at device 2.0 (no driver attached) pci1: <base peripheral> at device 2.2 (no driver attached) pci1: <display, VGA> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 4.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge> at device 4.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem 0xf7ef0000-0xf7ef1fff,0xf7e80000-0xf7ebffff irq 24 at device 4.0 on pci2 ciss0: [GIANT-LOCKED] pci0: <base peripheral, interrupt controller> at device 7.1 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci3: <ACPI PCI bus> on pcib3 bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xf7ff0000-0xf7ffffff irq 28 at device 6.0 on pci3 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:17:a4:8f:27:68 bge1: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xf7fe0000-0xf7feffff irq 29 at device 6.1 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:17:a4:8f:27:67 pci0: <base peripheral, interrupt controller> at device 8.1 (no driver attached) pcib4: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci4 pci5: <ACPI PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 9.1 (no driver attached) pcib6: <ACPI PCI-PCI bridge> at device 10.0 on pci4 pci6: <ACPI PCI bus> on pcib6 pci4: <base peripheral, interrupt controller> at device 10.1 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry Fast IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default acd0: CDROM <HL-DT-ST GCR-8240N/2.03> at ata0-master PIO4 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 17200MB (35226720 512 byte sectors: 255H 32S/T 4317C) _______________________________________________ freebsd-amd64@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4527BDCC.1090601>