Date: Sat, 21 Jul 2007 08:23:55 -0700 From: Garrett Cooper <youshi10@u.washington.edu> To: Tim Daneliuk <tundra@tundraware.com> Cc: FreeBSD Mailing List <freebsd-questions@freebsd.org> Subject: Re: SATA 300 Drive Being Run At 150 Message-ID: <46A2250B.3000609@u.washington.edu> In-Reply-To: <46A22253.8080100@tundraware.com> References: <46A22253.8080100@tundraware.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Tim Daneliuk wrote: > I asked this question a while back, but needed to do more digging to make > sure I had latest sources etc. > > I have an Intel motherboard that shows this for a SATA controller: > > atapci1: <Intel ICH7 SATA300 controller> port > 0x20c8-0x20cf,0x20ec-0x20ef,0x20c0-0x20c7,0x20e8-0x20eb,0x20a0-0x20af > mem 0x90204000-0x902043ff irq 19 at device 31.2 on pci0 > > But the hard drive - a SATA 300 device - shows up like this: > > ad4: 238475MB <WDC WD2500JS-00NCB1 10.02E02> at ata2-master SATA150 > ^^^^^^^ > > Using dd, I have confirmed that the drive is running nowhere near > SATA-III speeds, at least on reads: > > 968470075 bytes transferred in 7.132891 secs (135775249 bytes/sec) > > This is on a 6.2-Stable system that is very lightly loaded... > SATA Cable not 300Mbps capable? -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46A2250B.3000609>