From owner-freebsd-current@FreeBSD.ORG Sat Aug 23 08:43:33 2003 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 27C4416A4BF for ; Sat, 23 Aug 2003 08:43:33 -0700 (PDT) Received: from purge.bash.sh (purge.bash.sh [193.178.223.24]) by mx1.FreeBSD.org (Postfix) with ESMTP id E106E43FE3 for ; Sat, 23 Aug 2003 08:43:30 -0700 (PDT) (envelope-from stu@ipng.org.uk) Received: from acbe27c1.ipt.aol.com ([172.190.39.193] helo=stu.ipng.org.uk) by purge.bash.sh with asmtp (Exim 4.20 #2 ) id 19qaXp-0005Sg-1m for ; Sat, 23 Aug 2003 16:43:13 +0100 Received: from stu by stu.ipng.org.uk with local (Exim 4.10) id 19qaa2-000Mck-00 for freebsd-current@freebsd.org; Sat, 23 Aug 2003 16:45:30 +0100 Date: Sat, 23 Aug 2003 16:45:30 +0100 From: Stuart Walsh To: freebsd-current@freebsd.org Message-ID: <20030823154530.GA86441@deepfreeze.stu.ipng.org.uk> Mime-Version: 1.0 Content-Disposition: inline User-Agent: Mutt/1.5.4i X-SA-Exim-Mail-From: stu@ipng.org.uk Content-Type: multipart/mixed; boundary="ZGiS0Q5IWpPtfppv" X-Spam-Status: No, hits=0.7 required=7.5 tests=PATCH_UNIFIED_DIFF,UPPERCASE_25_50 version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) X-SA-Exim-Version: 3.0 (built Tue Jul 1 14:25:23 BST 2003) X-SA-Exim-Scanned: Yes Subject: 3C940 / Asus P4P800 gigabit LAN driver X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 23 Aug 2003 15:43:33 -0000 --ZGiS0Q5IWpPtfppv Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi, I ported the openbsd additions to the sk driver to support the 3c940 gigabit network card which is commonly found in the above asus motherboard. Testers/comments/commits welcome, but please don't blame me if it burns your house down or something :) Apply the diff in /usr/src/sys. It will have to be a fairly recent -current because of the recent pci header reloactions. Please be aware that I have had reports of panics on kldunloading the sk module. I don't posess the hardware myself and this could be present in the sk driver in general, so more information on this would be greatly received. Regards, Stuart Walsh --ZGiS0Q5IWpPtfppv Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="3c940.diff" Index: dev/mii/e1000phy.c =================================================================== RCS file: /home/ncvs/src/sys/dev/mii/e1000phy.c,v retrieving revision 1.8 diff -u -r1.8 e1000phy.c --- dev/mii/e1000phy.c 19 Jan 2003 02:59:32 -0000 1.8 +++ dev/mii/e1000phy.c 23 Aug 2003 15:17:42 -0000 @@ -87,7 +86,8 @@ ma = device_get_ivars(dev); id = ((ma->mii_id1 << 16) | ma->mii_id2) & E1000_ID_MASK; - if (id != E1000_ID_88E1000 && id != E1000_ID_88E1000S) { + if (id != E1000_ID_88E1000 && id != E1000_ID_88E1000S && + id != E1011_ID) { return ENXIO; } @@ -101,6 +101,9 @@ struct mii_softc *sc; struct mii_attach_args *ma; struct mii_data *mii; +#if 0 + u_int32_t id; +#endif getenv_int("e1000phy_debug", &e1000phy_debug); @@ -117,6 +120,14 @@ sc->mii_flags |= MIIF_NOISOLATE; mii->mii_instance++; + +#if 0 + id = ((ma->mii_id1 << 16) | ma->mii_id2) & E1000_ID_MASK; + + if ((id == E1011_ID) && (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)) + sc->mii_flags |= MIIF_HAVEFIBER; +#endif + e1000phy_reset(sc); device_printf(dev, " "); @@ -126,27 +137,37 @@ ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), E1000_CR_ISOLATE); */ - ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst), - E1000_CR_SPEED_10); - printf("10baseT, "); - ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst), - E1000_CR_SPEED_10 | E1000_CR_FULL_DUPLEX); - printf("10baseT-FDX, "); - ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst), - E1000_CR_SPEED_100); - printf("100baseTX, "); - ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst), - E1000_CR_SPEED_100 | E1000_CR_FULL_DUPLEX); - printf("100baseTX-FDX, "); - /* - * 1000BT-simplex not supported; driver must ignore this entry, - * but it must be present in order to manually set full-duplex. - */ - ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0, sc->mii_inst), - E1000_CR_SPEED_1000); - ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX, sc->mii_inst), - E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX); - printf("1000baseTX-FDX, "); +#if 0 + if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { +#endif + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst), + E1000_CR_SPEED_10); + printf("10baseT, "); + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst), + E1000_CR_SPEED_10 | E1000_CR_FULL_DUPLEX); + printf("10baseT-FDX, "); + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst), + E1000_CR_SPEED_100); + printf("100baseTX, "); + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst), + E1000_CR_SPEED_100 | E1000_CR_FULL_DUPLEX); + printf("100baseTX-FDX, "); + /* + * 1000BT-simplex not supported; driver must ignore this entry, + * but it must be present in order to manually set full-duplex. + */ + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0, sc->mii_inst), + E1000_CR_SPEED_1000); + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX, sc->mii_inst), + E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX); + printf("1000baseTX-FDX, "); +#if 0 + } else { + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX,sc->mii_inst), + E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX); + } +#endif + ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0); printf("auto\n"); #undef ADD @@ -233,6 +254,13 @@ (void)e1000phy_mii_phy_auto(sc); break; + case IFM_1000_SX: + e1000phy_reset(sc); + + PHY_WRITE(sc, E1000_CR, E1000_CR_FULL_DUPLEX | E1000_CR_SPEED_1000); + PHY_WRITE(sc, E1000_AR, E1000_FA_1000X_FD); + break; + case IFM_1000_T: e1000phy_reset(sc); @@ -351,40 +379,64 @@ return; } - if (ssr & E1000_SSR_1000MBS) - mii->mii_media_active |= IFM_1000_T; - else if (ssr & E1000_SSR_100MBS) - mii->mii_media_active |= IFM_100_TX; - else - mii->mii_media_active |= IFM_10_T; +#if 0 + if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { +#endif + if (ssr & E1000_SSR_1000MBS) + mii->mii_media_active |= IFM_1000_T; + else if (ssr & E1000_SSR_100MBS) + mii->mii_media_active |= IFM_100_TX; + else + mii->mii_media_active |= IFM_10_T; +#if 0 + } else { + if (ssr & E1000_SSR_1000MBS) + mii->mii_media_active |= IFM_1000_SX; + } +#endif if (ssr & E1000_SSR_DUPLEX) mii->mii_media_active |= IFM_FDX; else mii->mii_media_active |= IFM_HDX; - /* FLAG0==rx-flow-control FLAG1==tx-flow-control */ - if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) { - mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1; - } else if (!(ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && - (lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { - mii->mii_media_active |= IFM_FLAG1; - } else if ((ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && - !(lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { - mii->mii_media_active |= IFM_FLAG0; - } +#if 0 + if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { + /* FLAG0==rx-flow-control FLAG1==tx-flow-control */ +#endif + if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) { + mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1; + } else if (!(ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && + (lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { + mii->mii_media_active |= IFM_FLAG1; + } else if ((ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && + !(lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { + mii->mii_media_active |= IFM_FLAG0; + } +#if 0 + } +#endif } static int e1000phy_mii_phy_auto(struct mii_softc *mii) { - - PHY_WRITE(mii, E1000_AR, E1000_AR_10T | E1000_AR_10T_FD | - E1000_AR_100TX | E1000_AR_100TX_FD | - E1000_AR_PAUSE | E1000_AR_ASM_DIR); - PHY_WRITE(mii, E1000_1GCR, E1000_1GCR_1000T_FD); - PHY_WRITE(mii, E1000_CR, - E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG); +#if 0 + if ((mii->mii_flags & MIIF_HAVEFIBER) == 0) { +#endif + PHY_WRITE(mii, E1000_AR, E1000_AR_10T | E1000_AR_10T_FD | + E1000_AR_100TX | E1000_AR_100TX_FD | + E1000_AR_PAUSE | E1000_AR_ASM_DIR); + PHY_WRITE(mii, E1000_1GCR, E1000_1GCR_1000T_FD); +#if 0 + } else { + PHY_WRITE(mii, E1000_AR, E1000_FA_1000X_FD | + E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE); + } +#endif + + PHY_WRITE(mii, E1000_CR, + E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG); return (EJUSTRETURN); } Index: dev/mii/e1000phyreg.h =================================================================== RCS file: /home/ncvs/src/sys/dev/mii/e1000phyreg.h,v retrieving revision 1.1 diff -u -r1.1 e1000phyreg.h --- dev/mii/e1000phyreg.h 9 Apr 2001 21:28:53 -0000 1.1 +++ dev/mii/e1000phyreg.h 23 Aug 2003 15:17:42 -0000 @@ -108,6 +108,7 @@ #define E1000_ID_88E1000 0x01410C50 #define E1000_ID_88E1000S 0x01410C40 #define E1000_ID_MASK 0xFFFFFFF0 +#define E1011_ID 0x01410c20 #define E1000_AR 0x04 /* autonegotiation advertise reg */ #define E1000_AR_SELECTOR_FIELD 0x0001 @@ -284,3 +285,31 @@ #define E1000_LCR_PULSE_340_670MS 0x5000 #define E1000_LCR_PULSE_670_13S 0x6000 #define E1000_LCR_PULSE_13_26S 0x7000 + +/* Autonegotiation register bits for fiber cards (Alaska Only!) */ +#define E1000_FA_1000X_FD 0x0020 +#define E1000_FA_1000X 0x0040 +#define E1000_FA_SYM_PAUSE 0x0080 +#define E1000_FA_ASYM_PAUSE 0x0100 +#define E1000_FA_FAULT1 0x1000 +#define E1000_FA_FAULT2 0x2000 +#define E1000_FA_NEXT_PAGE 0x8000 + +/* autoneg link partner ability register bits for fiber cards (Alaska Only!) */ +#define E1000_FPAR_1000X_FD 0x0020 +#define E1000_FPAR_1000X 0x0040 +#define E1000_FPAR_SYM_PAUSE 0x0080 +#define E1000_FPAR_ASYM_PAUSE 0x0100 +#define E1000_FPAR_FAULT1 0x1000 +#define E1000_FPAR_FAULT2 0x2000 +#define E1000_FPAR_ACK 0x4000 +#define E1000_FPAR_NEXT_PAGE 0x8000 + +/* The following register is found only on the 88E1011 Alaska PHY */ +#define E1000_ESSR 0x1B /* Extended PHY specific sts */ +#define E1000_ESSR_FIBER_LINK 0x2000 +#define E1000_ESSR_GMII_COPPER 0x000f +#define E1000_ESSR_GMII_FIBER 0x0007 +#define E1000_ESSR_TBI_COPPER 0x000d +#define E1000_ESSR_TBI_FIBER 0x0005 + Index: pci/if_sk.c =================================================================== RCS file: /home/ncvs/src/sys/pci/if_sk.c,v retrieving revision 1.64 diff -u -r1.64 if_sk.c --- pci/if_sk.c 22 Aug 2003 07:13:21 -0000 1.64 +++ pci/if_sk.c 23 Aug 2003 15:17:42 -0000 @@ -106,6 +106,7 @@ #include #include +#include MODULE_DEPEND(sk, pci, 1, 1, 1); MODULE_DEPEND(sk, ether, 1, 1, 1); @@ -121,6 +122,7 @@ static struct sk_type sk_devs[] = { { SK_VENDORID, SK_DEVICEID_GE, "SysKonnect Gigabit Ethernet" }, + { SK_VENDOR_3COM, SK_DEVICE_3C940, "3Com 3C940 Gigabit Ethernet" }, { 0, 0, NULL } }; @@ -134,6 +136,7 @@ static void sk_intr (void *); static void sk_intr_xmac (struct sk_if_softc *); static void sk_intr_bcom (struct sk_if_softc *); +static void sk_intr_yukon (struct sk_if_softc *); static void sk_rxeof (struct sk_if_softc *); static void sk_txeof (struct sk_if_softc *); static int sk_encap (struct sk_if_softc *, struct mbuf *, @@ -142,6 +145,7 @@ static int sk_ioctl (struct ifnet *, u_long, caddr_t); static void sk_init (void *); static void sk_init_xmac (struct sk_if_softc *); +static void sk_init_yukon (struct sk_if_softc *); static void sk_stop (struct sk_if_softc *); static void sk_watchdog (struct ifnet *); static void sk_shutdown (device_t); @@ -165,6 +169,10 @@ static void sk_vpd_read_res (struct sk_softc *, struct vpd_res *, int); static void sk_vpd_read (struct sk_softc *); +static int sk_marv_miibus_readreg(device_t, int, int); +static int sk_marv_miibus_writereg(device_t, int, int, int); +static void sk_marv_miibus_statchg(device_t); + static int sk_miibus_readreg (device_t, int, int); static int sk_miibus_writereg (device_t, int, int, int); static void sk_miibus_statchg (device_t); @@ -414,14 +422,86 @@ } static int +sk_marv_miibus_readreg(dev, phy, reg) + struct device *dev; + int phy, reg; +{ + struct sk_if_softc *sc_if; + u_int16_t val; + int i; + + sc_if = device_get_softc(dev); + + if (phy != 0) + return(0); + + if (sc_if->sk_phytype != SK_PHYTYPE_MARV_COPPER && + sc_if->sk_phytype != SK_PHYTYPE_MARV_FIBER) + return(0); + + SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) | + YU_SMICR_REGAD(reg) | YU_SMICR_OP_READ); + + for (i = 0; i < SK_TIMEOUT; i++) { + DELAY(1); + val = SK_YU_READ_2(sc_if, YUKON_SMICR); + if (val & YU_SMICR_READ_VALID) + break; + } + + if (i == SK_TIMEOUT) { + printf("sk%d: phy failed to come ready\n", + sc_if->sk_unit); + return 0; + } + + val = SK_YU_READ_2(sc_if, YUKON_SMIDR); + + return val; +} + +static int +sk_marv_miibus_writereg(dev, phy, reg, val) + struct device *dev; + int phy, reg, val; +{ + struct sk_if_softc *sc_if; + int i; + + sc_if = device_get_softc(dev); + + SK_YU_WRITE_2(sc_if, YUKON_SMIDR, val); + SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) | + YU_SMICR_REGAD(reg) | YU_SMICR_OP_WRITE); + + for (i = 0; i < SK_TIMEOUT; i++) { + DELAY(1); + if (SK_YU_READ_2(sc_if, YUKON_SMICR) & YU_SMICR_BUSY) + break; + } + return(0); +} + +static void +sk_marv_miibus_statchg(dev) + struct device *dev; +{ +} + +static int sk_miibus_readreg(dev, phy, reg) device_t dev; int phy, reg; { struct sk_if_softc *sc_if; + struct sk_softc *sc; int i; sc_if = device_get_softc(dev); + sc = sc_if->sk_softc; + + if (sc->sk_type == SK_YUKON) + return(sk_marv_miibus_readreg(dev, phy, reg)); if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0) return(0); @@ -456,9 +536,15 @@ int phy, reg, val; { struct sk_if_softc *sc_if; + struct sk_softc *sc; int i; sc_if = device_get_softc(dev); + sc = sc_if->sk_softc; + + if (sc->sk_type == SK_YUKON) + return(sk_marv_miibus_writereg(dev, phy, reg, val)); + SK_IF_LOCK(sc_if); SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); @@ -492,9 +578,15 @@ device_t dev; { struct sk_if_softc *sc_if; + struct sk_softc *sc; struct mii_data *mii; sc_if = device_get_softc(dev); + + sc = sc_if->sk_softc; + if (sc->sk_type == SK_YUKON) + return(sk_marv_miibus_statchg(dev)); + mii = device_get_softc(sc_if->sk_miibus); SK_IF_LOCK(sc_if); /* @@ -554,7 +646,8 @@ sk_setmulti(sc_if) struct sk_if_softc *sc_if; { - struct ifnet *ifp; + struct sk_softc *sc = sc_if->sk_softc; + struct ifnet *ifp; u_int32_t hashes[2] = { 0, 0 }; int h, i; struct ifmultiaddr *ifma; @@ -563,10 +656,21 @@ ifp = &sc_if->arpcom.ac_if; /* First, zot all the existing filters. */ - for (i = 1; i < XM_RXFILT_MAX; i++) - sk_setfilt(sc_if, (caddr_t)&dummy, i); - SK_XM_WRITE_4(sc_if, XM_MAR0, 0); - SK_XM_WRITE_4(sc_if, XM_MAR2, 0); + switch(sc->sk_type) + { + case SK_GENESIS: + for (i = 1; i < XM_RXFILT_MAX; i++) + sk_setfilt(sc_if, (caddr_t)&dummy, i); + SK_XM_WRITE_4(sc_if, XM_MAR0, 0); + SK_XM_WRITE_4(sc_if, XM_MAR2, 0); + break; + case SK_YUKON: + SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0); + SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0); + SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0); + SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0); + break; + } /* Now program new ones. */ if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { @@ -582,7 +686,7 @@ * into the perfect filter. For all others, * use the hash table. */ - if (i < XM_RXFILT_MAX) { + if (sc->sk_type == SK_GENESIS && i < XM_RXFILT_MAX) { sk_setfilt(sc_if, LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i); i++; @@ -598,11 +702,21 @@ } } - SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH| - XM_MODE_RX_USE_PERFECT); - SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]); - SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]); - + switch(sc->sk_type) + { + case SK_GENESIS: + SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH| + XM_MODE_RX_USE_PERFECT); + SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]); + SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]); + break; + case SK_YUKON: + SK_YU_WRITE_2(sc_if, YUKON_MCAH1, hashes[0] & 0xffff); + SK_YU_WRITE_2(sc_if, YUKON_MCAH2, (hashes[0] >> 16) & 0xffff); + SK_YU_WRITE_2(sc_if, YUKON_MCAH3, hashes[1] & 0xffff); + SK_YU_WRITE_2(sc_if, YUKON_MCAH4, (hashes[1] >> 16) & 0xffff); + break; + } return; } @@ -895,6 +1009,7 @@ caddr_t data; { struct sk_if_softc *sc_if = ifp->if_softc; + struct sk_softc *sc = sc_if->sk_softc; struct ifreq *ifr = (struct ifreq *) data; int error = 0; struct mii_data *mii; @@ -915,14 +1030,28 @@ if (ifp->if_flags & IFF_RUNNING && ifp->if_flags & IFF_PROMISC && !(sc_if->sk_if_flags & IFF_PROMISC)) { - SK_XM_SETBIT_4(sc_if, XM_MODE, - XM_MODE_RX_PROMISC); + switch(sc->sk_type) { + case SK_GENESIS: + SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); + break; + case SK_YUKON: + SK_YU_CLRBIT_2(sc_if, YUKON_RCR, + YU_RCR_UFLEN | YU_RCR_MUFLEN); + break; + } sk_setmulti(sc_if); } else if (ifp->if_flags & IFF_RUNNING && !(ifp->if_flags & IFF_PROMISC) && sc_if->sk_if_flags & IFF_PROMISC) { - SK_XM_CLRBIT_4(sc_if, XM_MODE, - XM_MODE_RX_PROMISC); + switch(sc->sk_type) { + case SK_GENESIS: + SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); + break; + case SK_YUKON: + SK_YU_SETBIT_2(sc_if, YUKON_RCR, + YU_RCR_UFLEN | YU_RCR_MUFLEN); + break; + } sk_setmulti(sc_if); } else sk_init(sc_if); @@ -984,18 +1113,26 @@ sk_reset(sc) struct sk_softc *sc; { - CSR_WRITE_4(sc, SK_CSR, SK_CSR_SW_RESET); - CSR_WRITE_4(sc, SK_CSR, SK_CSR_MASTER_RESET); - DELAY(1000); - CSR_WRITE_4(sc, SK_CSR, SK_CSR_SW_UNRESET); - CSR_WRITE_4(sc, SK_CSR, SK_CSR_MASTER_UNRESET); - - /* Configure packet arbiter */ - sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET); - sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT); - sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT); - sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT); - sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT); + CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_RESET); + CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_RESET); + if (sc->sk_type == SK_YUKON) + CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_SET); + + DELAY(1000); + CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_UNRESET); + DELAY(2); + CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_UNRESET); + if (sc->sk_type == SK_YUKON) + CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_CLEAR); + + if (sc->sk_type == SK_GENESIS) { + /* Configure packet arbiter */ + sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET); + sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT); + sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT); + sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT); + sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT); + } /* Enable RAM interface */ sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET); @@ -1123,6 +1260,9 @@ case SK_PHYTYPE_BCOM: sc_if->sk_phyaddr = SK_PHYADDR_BCOM; break; + case SK_PHYTYPE_MARV_COPPER: + sc_if->sk_phyaddr = SK_PHYADDR_MARV; + break; default: printf("skc%d: unsupported PHY type: %d\n", sc->sk_unit, sc_if->sk_phytype); @@ -1174,8 +1314,19 @@ /* * Do miibus setup. */ - sk_init_xmac(sc_if); - if (mii_phy_probe(dev, &sc_if->sk_miibus, + switch(sc->sk_type) { + case SK_GENESIS: + sk_init_xmac(sc_if); + break; + case SK_YUKON: + sk_init_yukon(sc_if); + break; + default: + panic("skc%d: unknown device type %d", sc_if->sk_unit, sc->sk_type); + + } + + if (mii_phy_probe(dev, &sc_if->sk_miibus, sk_ifmedia_upd, sk_ifmedia_sts)) { printf("skc%d: no PHY found!\n", sc_if->sk_unit); ether_ifdetach(ifp); @@ -1210,6 +1361,7 @@ mtx_init(&sc->sk_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE); + #ifndef BURN_BRIDGES /* * Handle power management nonsense. @@ -1271,30 +1423,48 @@ /* Read and save vital product data from EEPROM. */ sk_vpd_read(sc); + /* Decide which chip we have */ + switch(pci_get_device(dev)) { + case SK_DEVICEID_GE: + sc->sk_type = SK_GENESIS; + break; + case SK_DEVICE_3C940: + sc->sk_type = SK_YUKON; + break; + default: + printf(": unknown device!\n"); + goto fail; + } + /* Read and save RAM size and RAMbuffer offset */ - switch(sk_win_read_1(sc, SK_EPROM0)) { - case SK_RAMSIZE_512K_64: - sc->sk_ramsize = 0x80000; - sc->sk_rboff = SK_RBOFF_0; - break; - case SK_RAMSIZE_1024K_64: - sc->sk_ramsize = 0x100000; - sc->sk_rboff = SK_RBOFF_80000; - break; - case SK_RAMSIZE_1024K_128: - sc->sk_ramsize = 0x100000; - sc->sk_rboff = SK_RBOFF_0; - break; - case SK_RAMSIZE_2048K_128: - sc->sk_ramsize = 0x200000; - sc->sk_rboff = SK_RBOFF_0; - break; - default: - printf("skc%d: unknown ram size: %d\n", - sc->sk_unit, sk_win_read_1(sc, SK_EPROM0)); - error = ENXIO; - goto fail; - } + if(sc->sk_type == SK_GENESIS) { + switch(sk_win_read_1(sc, SK_EPROM0)) { + case SK_RAMSIZE_512K_64: + sc->sk_ramsize = 0x80000; + sc->sk_rboff = SK_RBOFF_0; + break; + case SK_RAMSIZE_1024K_64: + sc->sk_ramsize = 0x100000; + sc->sk_rboff = SK_RBOFF_80000; + break; + case SK_RAMSIZE_1024K_128: + sc->sk_ramsize = 0x100000; + sc->sk_rboff = SK_RBOFF_0; + break; + case SK_RAMSIZE_2048K_128: + sc->sk_ramsize = 0x200000; + sc->sk_rboff = SK_RBOFF_0; + break; + default: + printf("skc%d: unknown ram size: %d\n", + sc->sk_unit, sk_win_read_1(sc, SK_EPROM0)); + error = ENXIO; + goto fail; + } + } + else { + sc->sk_ramsize = 0x20000; + } /* Read and save physical media type */ switch(sk_win_read_1(sc, SK_PMDTYPE)) { @@ -1805,6 +1975,15 @@ return; } +void +sk_intr_yukon(sc_if) + struct sk_if_softc *sc_if; +{ + int status; + + status = SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR); +} + static void sk_intr(xsc) void *xsc; @@ -1854,18 +2033,26 @@ } /* Then MAC interrupts. */ - if (status & SK_ISR_MAC1 && - ifp0->if_flags & IFF_RUNNING) - sk_intr_xmac(sc_if0); - - if (status & SK_ISR_MAC2 && - ifp1->if_flags & IFF_RUNNING) - sk_intr_xmac(sc_if1); + if (status & SK_ISR_MAC1 && ifp0->if_flags & IFF_RUNNING) { + if (sc->sk_type == SK_GENESIS) + sk_intr_xmac(sc_if0); + else + sk_intr_yukon(sc_if0); + } + + if (status & SK_ISR_MAC2 && ifp1->if_flags & IFF_RUNNING) { + if (sc->sk_type == SK_GENESIS) + sk_intr_xmac(sc_if1); + else + sk_intr_yukon(sc_if1); + } if (status & SK_ISR_EXTERNAL_REG) { - if (ifp0 != NULL) + if (ifp0 != NULL && + sc_if0->sk_phytype == SK_PHYTYPE_BCOM) sk_intr_bcom(sc_if0); - if (ifp1 != NULL) + if (ifp1 != NULL && + sc_if1->sk_phytype == SK_PHYTYPE_BCOM) sk_intr_bcom(sc_if1); } } @@ -2051,6 +2238,103 @@ return; } +void sk_init_yukon(sc_if) + struct sk_if_softc *sc_if; +{ + u_int32_t /*mac, */phy; + u_int16_t reg; + int i; + + /* GMAC and GPHY Reset */ + SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET); + + SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET); + DELAY(1000); + SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_CLEAR); + SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET); + DELAY(1000); + + phy = SK_GPHY_INT_POL_HI | SK_GPHY_DIS_FC | SK_GPHY_DIS_SLEEP | + SK_GPHY_ENA_XC | SK_GPHY_ANEG_ALL | SK_GPHY_ENA_PAUSE; + + switch(sc_if->sk_softc->sk_pmd) { + case IFM_1000_SX: + case IFM_1000_LX: + phy |= SK_GPHY_FIBER; + break; + case IFM_1000_T: + phy |= SK_GPHY_COPPER; + break; + } + + SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_SET); + DELAY(1000); + SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_CLEAR); + SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF | + SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR); + + /* unused read of the interrupt source register */ + SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR); + + reg = SK_YU_READ_2(sc_if, YUKON_PAR); + + /* MIB Counter Clear Mode set */ + reg |= YU_PAR_MIB_CLR; + SK_YU_WRITE_2(sc_if, YUKON_PAR, reg); + + /* MIB Counter Clear Mode clear */ + reg &= ~YU_PAR_MIB_CLR; + SK_YU_WRITE_2(sc_if, YUKON_PAR, reg); + + /* receive control reg */ + SK_YU_WRITE_2(sc_if, YUKON_RCR, YU_RCR_UFLEN | YU_RCR_MUFLEN | + YU_RCR_CRCR); + + /* transmit parameter register */ + SK_YU_WRITE_2(sc_if, YUKON_TPR, YU_TPR_JAM_LEN(0x3) | + YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) ); + + /* serial mode register */ + SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) | + YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e)); + + /* Setup Yukon's address */ + for (i = 0; i < 3; i++) { + /* Write Source Address 1 (unicast filter) */ + SK_YU_WRITE_2(sc_if, YUKON_SAL1 + i * 4, + sc_if->arpcom.ac_enaddr[i * 2] | + sc_if->arpcom.ac_enaddr[i * 2 + 1] << 8); + } + + for (i = 0; i < 3; i++) { + reg = sk_win_read_2(sc_if->sk_softc, + SK_MAC1_0 + i * 2 + sc_if->sk_port * 8); + SK_YU_WRITE_2(sc_if, YUKON_SAL2 + i * 4, reg); + } + + /* clear all Multicast filter hash registers */ + SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0); + SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0); + SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0); + SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0); + + /* enable interrupt mask for counter overflows */ + SK_YU_WRITE_2(sc_if, YUKON_TIMR, 0); + SK_YU_WRITE_2(sc_if, YUKON_RIMR, 0); + SK_YU_WRITE_2(sc_if, YUKON_TRIMR, 0); + + /* Configure RX MAC FIFO */ + SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_CLEAR); + SK_IF_WRITE_4(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_OPERATION_ON); + + /* Configure TX MAC FIFO */ + SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_CLEAR); + SK_IF_WRITE_4(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_OPERATION_ON); + +} + + + /* * Note that to properly initialize any part of the GEnesis chip, * you first have to take it out of reset mode. @@ -2073,30 +2357,41 @@ /* Cancel pending I/O and free all RX/TX buffers. */ sk_stop(sc_if); - /* Configure LINK_SYNC LED */ - SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON); - SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_ON); - - /* Configure RX LED */ - SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_START); - - /* Configure TX LED */ - SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_TXLEDCTL_COUNTER_START); + if (sc->sk_type == SK_GENESIS) { + /* Configure LINK_SYNC LED */ + SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON); + SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_ON); + + /* Configure RX LED */ + SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_START); + + /* Configure TX LED */ + SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_TXLEDCTL_COUNTER_START); + } /* Configure I2C registers */ /* Configure XMAC(s) */ - sk_init_xmac(sc_if); + switch(sc->sk_type) { + case SK_GENESIS: + sk_init_xmac(sc_if); + break; + case SK_YUKON: + sk_init_yukon(sc_if); + break; + } mii_mediachg(mii); - /* Configure MAC FIFOs */ - SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET); - SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END); - SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON); - - SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET); - SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END); - SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON); + if(sc->sk_type == SK_GENESIS) { + /* Configure MAC FIFOs */ + SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET); + SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END); + SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON); + + SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET); + SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END); + SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON); + } /* Configure transmit arbiter(s) */ SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, @@ -2153,9 +2448,18 @@ /* Start BMUs. */ SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START); - /* Enable XMACs TX and RX state machines */ - SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE); - SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); + if(sc->sk_type == SK_GENESIS) { + /* Enable XMACs TX and RX state machines */ + SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE); + SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); + } + + if(sc->sk_type == SK_YUKON) { + u_int16_t reg = SK_YU_READ_2(sc_if, YUKON_GPCR); + reg |= YU_GPCR_TXEN | YU_GPCR_RXEN; + reg &= ~(YU_GPCR_SPEED_EN | YU_GPCR_DPLX_EN); + SK_YU_WRITE_2(sc_if, YUKON_GPCR, reg); + } ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; @@ -2196,8 +2500,17 @@ /* Turn off various components of this interface. */ SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); - SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET); - SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET); + switch (sc->sk_type) { + case SK_GENESIS: + SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, + SK_TXMACCTL_XMAC_RESET); + SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET); + break; + case SK_YUKON: + SK_IF_WRITE_1(sc_if,0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_SET); + SK_IF_WRITE_1(sc_if,0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_SET); + break; + } SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE); SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF); SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE); Index: pci/if_skreg.h =================================================================== RCS file: /home/ncvs/src/sys/pci/if_skreg.h,v retrieving revision 1.15 diff -u -r1.15 if_skreg.h --- pci/if_skreg.h 9 Feb 2001 06:11:20 -0000 1.15 +++ pci/if_skreg.h 23 Aug 2003 15:17:42 -0000 @@ -36,11 +36,18 @@ * SysKonnect PCI vendor ID */ #define SK_VENDORID 0x1148 +#define SK_VENDOR_3COM 0x10b7 /* * SK-NET gigabit ethernet device ID */ #define SK_DEVICEID_GE 0x4300 +#define SK_DEVICE_3C940 0x1700 + +/* Values to keep the different chip revisions apart */ +#define SK_GENESIS 0 +#define SK_YUKON 1 + /* * GEnesis registers. The GEnesis chip has a 256-byte I/O window @@ -328,6 +335,9 @@ #define SK_PHYTYPE_BCOM 1 /* Broadcom BCM5400 */ #define SK_PHYTYPE_LONE 2 /* Level One LXT1000 */ #define SK_PHYTYPE_NAT 3 /* National DP83891 */ +#define SK_PHYTYPE_MARV_COPPER 4 /* Marvell 88E1011S */ +#define SK_PHYTYPE_MARV_FIBER 5 /* Marvell 88E1011S (fiber) */ + /* * PHY addresses. @@ -336,6 +346,8 @@ #define SK_PHYADDR_BCOM 0x1 #define SK_PHYADDR_LONE 0x3 #define SK_PHYADDR_NAT 0x0 +#define SK_PHYADDR_MARV 0x0 + #define SK_CONFIG_SINGLEMAC 0x01 #define SK_CONFIG_DIS_DSL_CLK 0x02 @@ -805,6 +817,29 @@ #define SK_FIFO_END 0x3F +/* Receive MAC FIFO 1 (Yukon Only) */ +#define SK_RXMF1_END 0x0C40 +#define SK_RXMF1_THRESHOLD 0x0C44 +#define SK_RXMF1_CTRL_TEST 0x0C48 +#define SK_RXMF1_WRITE_PTR 0x0C60 +#define SK_RXMF1_WRITE_LEVEL 0x0C68 +#define SK_RXMF1_READ_PTR 0x0C70 +#define SK_RXMF1_READ_LEVEL 0x0C78 + +#define SK_RFCTL_WR_PTR_TST_ON 0x00004000 /* Write pointer test on*/ +#define SK_RFCTL_WR_PTR_TST_OFF 0x00002000 /* Write pointer test off */ +#define SK_RFCTL_WR_PTR_STEP 0x00001000 /* Write pointer increment */ +#define SK_RFCTL_RD_PTR_TST_ON 0x00000400 /* Read pointer test on */ +#define SK_RFCTL_RD_PTR_TST_OFF 0x00000200 /* Read pointer test off */ +#define SK_RFCTL_RD_PTR_STEP 0x00000100 /* Read pointer increment */ +#define SK_RFCTL_RX_FIFO_OVER 0x00000040 /* Clear IRQ RX FIFO Overrun */ +#define SK_RFCTL_FRAME_RX_DONE 0x00000010 /* Clear IRQ Frame RX Done */ +#define SK_RFCTL_OPERATION_ON 0x00000008 /* Operational mode on */ +#define SK_RFCTL_OPERATION_OFF 0x00000004 /* Operational mode off */ +#define SK_RFCTL_RESET_CLEAR 0x00000002 /* MAC FIFO Reset Clear */ +#define SK_RFCTL_RESET_SET 0x00000001 /* MAC FIFO Reset Set */ + + /* Block 25 -- RX MAC FIFO 2 regisrers and LINK_SYNC counter */ #define SK_RXF2_END 0x0C80 #define SK_RXF2_WPTR 0x0C84 @@ -864,6 +899,31 @@ #define SK_TXLED1_CTL 0x0D28 #define SK_TXLED1_TST 0x0D29 +/* Receive MAC FIFO 1 (Yukon Only) */ +#define SK_TXMF1_END 0x0D40 +#define SK_TXMF1_THRESHOLD 0x0D44 +#define SK_TXMF1_CTRL_TEST 0x0D48 +#define SK_TXMF1_WRITE_PTR 0x0D60 +#define SK_TXMF1_WRITE_SHADOW 0x0D64 +#define SK_TXMF1_WRITE_LEVEL 0x0D68 +#define SK_TXMF1_READ_PTR 0x0D70 +#define SK_TXMF1_RESTART_PTR 0x0D74 +#define SK_TXMF1_READ_LEVEL 0x0D78 + +#define SK_TFCTL_WR_PTR_TST_ON 0x00004000 /* Write pointer test on*/ +#define SK_TFCTL_WR_PTR_TST_OFF 0x00002000 /* Write pointer test off */ +#define SK_TFCTL_WR_PTR_STEP 0x00001000 /* Write pointer increment */ +#define SK_TFCTL_RD_PTR_TST_ON 0x00000400 /* Read pointer test on */ +#define SK_TFCTL_RD_PTR_TST_OFF 0x00000200 /* Read pointer test off */ +#define SK_TFCTL_RD_PTR_STEP 0x00000100 /* Read pointer increment */ +#define SK_TFCTL_TX_FIFO_UNDER 0x00000040 /* Clear IRQ TX FIFO Under */ +#define SK_TFCTL_FRAME_TX_DONE 0x00000020 /* Clear IRQ Frame TX Done */ +#define SK_TFCTL_IRQ_PARITY_ER 0x00000010 /* Clear IRQ Parity Error */ +#define SK_TFCTL_OPERATION_ON 0x00000008 /* Operational mode on */ +#define SK_TFCTL_OPERATION_OFF 0x00000004 /* Operational mode off */ +#define SK_TFCTL_RESET_CLEAR 0x00000002 /* MAC FIFO Reset Clear */ +#define SK_TFCTL_RESET_SET 0x00000001 /* MAC FIFO Reset Set */ + /* Block 27 -- TX MAC FIFO 2 regisrers */ #define SK_TXF2_END 0x0D80 #define SK_TXF2_WPTR 0x0D84 @@ -903,6 +963,114 @@ #define SK_FIFO_OFF 0x00000004 #define SK_FIFO_ON 0x00000008 +/* Block 28 -- Descriptor Poll Timer */ +#define SK_DPT_INIT 0x0e00 /* Initial value 24 bits */ +#define SK_DPT_TIMER 0x0e04 /* Mul of 78.12MHz clk (24b) */ + +#define SK_DPT_TIMER_CTRL 0x0e08 /* Timer Control 16 bits */ +#define SK_DPT_TCTL_STOP 0x0001 /* Stop Timer */ +#define SK_DPT_TCTL_START 0x0002 /* Start Timer */ + +#define SK_DPT_TIMER_TEST 0x0e0a /* Timer Test 16 bits */ +#define SK_DPT_TTEST_STEP 0x0001 /* Timer Decrement */ +#define SK_DPT_TTEST_OFF 0x0002 /* Test Mode Off */ +#define SK_DPT_TTEST_ON 0x0004 /* Test Mode On */ + +/* Block 29 -- reserved */ + +/* Block 30 -- GMAC/GPHY Control Registers (Yukon Only)*/ +#define SK_GMAC_CTRL 0x0f00 /* GMAC Control Register */ +#define SK_GPHY_CTRL 0x0f04 /* GPHY Control Register */ +#define SK_GMAC_ISR 0x0f08 /* GMAC Interrupt Source Register */ +#define SK_GMAC_IMR 0x0f08 /* GMAC Interrupt Mask Register */ +#define SK_LINK_CTRL 0x0f10 /* Link Control Register (LCR) */ +#define SK_WOL_CTRL 0x0f20 /* Wake on LAN Control Register */ +#define SK_MAC_ADDR_LOW 0x0f24 /* Mack Address Registers LOW */ +#define SK_MAC_ADDR_HIGH 0x0f28 /* Mack Address Registers HIGH */ +#define SK_PAT_READ_PTR 0x0f2c /* Pattern Read Pointer Register */ +#define SK_PAT_LEN_REG0 0x0f30 /* Pattern Length Register 0 */ +#define SK_PAT_LEN0 0x0f30 /* Pattern Length 0 */ +#define SK_PAT_LEN1 0x0f31 /* Pattern Length 1 */ +#define SK_PAT_LEN2 0x0f32 /* Pattern Length 2 */ +#define SK_PAT_LEN3 0x0f33 /* Pattern Length 3 */ +#define SK_PAT_LEN_REG1 0x0f34 /* Pattern Length Register 1 */ +#define SK_PAT_LEN4 0x0f34 /* Pattern Length 4 */ +#define SK_PAT_LEN5 0x0f35 /* Pattern Length 5 */ +#define SK_PAT_LEN6 0x0f36 /* Pattern Length 6 */ +#define SK_PAT_LEN7 0x0f37 /* Pattern Length 7 */ +#define SK_PAT_CTR_REG0 0x0f38 /* Pattern Counter Register 0 */ +#define SK_PAT_CTR0 0x0f38 /* Pattern Counter 0 */ +#define SK_PAT_CTR1 0x0f39 /* Pattern Counter 1 */ +#define SK_PAT_CTR2 0x0f3a /* Pattern Counter 2 */ +#define SK_PAT_CTR3 0x0f3b /* Pattern Counter 3 */ +#define SK_PAT_CTR_REG1 0x0f3c /* Pattern Counter Register 1 */ +#define SK_PAT_CTR4 0x0f3c /* Pattern Counter 4 */ +#define SK_PAT_CTR5 0x0f3d /* Pattern Counter 5 */ +#define SK_PAT_CTR6 0x0f3e /* Pattern Counter 6 */ +#define SK_PAT_CTR7 0x0f3f /* Pattern Counter 7 */ + +#define SK_GMAC_LOOP_ON 0x00000020 /* Loopback mode for testing */ +#define SK_GMAC_LOOP_OFF 0x00000010 /* purposes */ +#define SK_GMAC_PAUSE_ON 0x00000008 /* enable forward of pause */ +#define SK_GMAC_PAUSE_OFF 0x00000004 /* signal to GMAC */ +#define SK_GMAC_RESET_CLEAR 0x00000002 /* Clear GMAC Reset */ +#define SK_GMAC_RESET_SET 0x00000001 /* Set GMAC Reset */ + +#define SK_GPHY_SEL_BDT 0x10000000 /* Select Bidirectional xfer */ +#define SK_GPHY_INT_POL_HI 0x08000000 /* IRQ Polarity Active */ +#define SK_GPHY_75_OHM 0x04000000 /* Use 75 Ohm Termination */ +#define SK_GPHY_DIS_FC 0x02000000 /* Disable Auto Fiber/Copper */ +#define SK_GPHY_DIS_SLEEP 0x01000000 /* Disable Energy Detect */ +#define SK_GPHY_HWCFG_M_3 0x00800000 /* HWCFG_MODE[3] */ +#define SK_GPHY_HWCFG_M_2 0x00400000 /* HWCFG_MODE[2] */ +#define SK_GPHY_HWCFG_M_1 0x00200000 /* HWCFG_MODE[1] */ +#define SK_GPHY_HWCFG_M_0 0x00100000 /* HWCFG_MODE[0] */ +#define SK_GPHY_ANEG_0 0x00080000 /* ANEG[0] */ +#define SK_GPHY_ENA_XC 0x00040000 /* Enable MDI Crossover */ +#define SK_GPHY_DIS_125 0x00020000 /* Disable 125MHz Clock */ +#define SK_GPHY_ANEG_3 0x00010000 /* ANEG[3] */ +#define SK_GPHY_ANEG_2 0x00008000 /* ANEG[2] */ +#define SK_GPHY_ANEG_1 0x00004000 /* ANEG[1] */ +#define SK_GPHY_ENA_PAUSE 0x00002000 /* Enable Pause */ +#define SK_GPHY_PHYADDR_4 0x00001000 /* Bit 4 of Phy Addr */ +#define SK_GPHY_PHYADDR_3 0x00000800 /* Bit 3 of Phy Addr */ +#define SK_GPHY_PHYADDR_2 0x00000400 /* Bit 2 of Phy Addr */ +#define SK_GPHY_PHYADDR_1 0x00000200 /* Bit 1 of Phy Addr */ +#define SK_GPHY_PHYADDR_0 0x00000100 /* Bit 0 of Phy Addr */ +#define SK_GPHY_RESET_CLEAR 0x00000002 /* Clear GPHY Reset */ +#define SK_GPHY_RESET_SET 0x00000001 /* Set GPHY Reset */ + +#define SK_GPHY_COPPER (SK_GPHY_HWCFG_M_0 | SK_GPHY_HWCFG_M_1 | \ + SK_GPHY_HWCFG_M_2 | SK_GPHY_HWCFG_M_3 ) +#define SK_GPHY_FIBER (SK_GPHY_HWCFG_M_0 | SK_GPHY_HWCFG_M_1 | \ + SK_GPHY_HWCFG_M_2 ) +#define SK_GPHY_ANEG_ALL (SK_GPHY_ANEG_0 | SK_GPHY_ANEG_1 | \ + SK_GPHY_ANEG_2 | SK_GPHY_ANEG_3 ) + +#define SK_GMAC_INT_TX_OFLOW 0x20 /* Transmit Counter Overflow */ +#define SK_GMAC_INT_RX_OFLOW 0x10 /* Receiver Overflow */ +#define SK_GMAC_INT_TX_UNDER 0x08 /* Transmit FIFO Underrun */ +#define SK_GMAC_INT_TX_DONE 0x04 /* Transmit Complete */ +#define SK_GMAC_INT_RX_OVER 0x02 /* Receive FIFO Overrun */ +#define SK_GMAC_INT_RX_DONE 0x01 /* Receive Complete */ + +#define SK_LINK_RESET_CLEAR 0x0002 /* Link Reset Clear */ +#define SK_LINK_RESET_SET 0x0001 /* Link Reset Set */ + +/* Block 31 -- reserved */ + +/* Block 32-33 -- Pattern Ram */ +#define SK_WOL_PRAM 0x1000 + +/* Block 0x22 - 0x3f -- reserved */ + +/* Block 0x50 to 0x5F -- MARV 1 registers */ +#define SK_MARV1_BASE 0x2800 + +/* Block 0x70 to 0x7F -- MARV 2 registers */ +#define SK_MARV2_BASE 0x3800 + + /* Block 0x40 to 0x4F -- XMAC 1 registers */ #define SK_XMAC1_BASE 0x2000 #define SK_XMAC1_END 0x23FF @@ -910,6 +1078,35 @@ /* Block 0x60 to 0x6F -- XMAC 2 registers */ #define SK_XMAC2_BASE 0x3000 #define SK_XMAC2_END 0x33FF + +/* Compute relative offset of an MARV register in the MARV window(s). */ +#define SK_YU_REG(sc, reg) \ + ((reg) + SK_MARV1_BASE + \ + (((sc)->sk_port) * (SK_MARV2_BASE - SK_MARV1_BASE))) + +#define SK_YU_READ_4(sc, reg) \ + sk_win_read_4((sc)->sk_softc, SK_YU_REG((sc), (reg))) + +#define SK_YU_READ_2(sc, reg) \ + sk_win_read_2((sc)->sk_softc, SK_YU_REG((sc), (reg))) + +#define SK_YU_WRITE_4(sc, reg, val) \ + sk_win_write_4((sc)->sk_softc, SK_YU_REG((sc), (reg)), (val)) + +#define SK_YU_WRITE_2(sc, reg, val) \ + sk_win_write_2((sc)->sk_softc, SK_YU_REG((sc), (reg)), (val)) + +#define SK_YU_SETBIT_4(sc, reg, x) \ + SK_YU_WRITE_4(sc, reg, (SK_YU_READ_4(sc, reg)) | (x)) + +#define SK_YU_CLRBIT_4(sc, reg, x) \ + SK_YU_WRITE_4(sc, reg, (SK_YU_READ_4(sc, reg)) & ~(x)) + +#define SK_YU_SETBIT_2(sc, reg, x) \ + SK_YU_WRITE_2(sc, reg, (SK_YU_READ_2(sc, reg)) | (x)) + +#define SK_YU_CLRBIT_2(sc, reg, x) \ + SK_YU_WRITE_2(sc, reg, (SK_YU_READ_2(sc, reg)) & ~(x)) /* Compute relative offset of an XMAC register in the XMAC window(s). */ #define SK_XMAC_REG(reg, mac) (((reg) * 2) + SK_XMAC1_BASE + \ Index: pci/yukonreg.h =================================================================== RCS file: pci/yukonreg.h diff -N pci/yukonreg.h --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ pci/yukonreg.h 23 Aug 2003 15:17:42 -0000 @@ -0,0 +1,169 @@ +/* $OpenBSD: yukonreg.h,v 1.2 2003/08/12 05:23:06 nate Exp $ */ +/* + * Copyright (c) 2003 Nathan L. Binkert + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* General Purpose Status Register (GPSR) */ +#define YUKON_GPSR 0x0000 + +#define YU_GPSR_SPEED 0x8000 /* speed 0 - 10Mbps, 1 - 100Mbps */ +#define YU_GPSR_DUPLEX 0x4000 /* 0 - half duplex, 1 - full duplex */ +#define YU_GPSR_FCTL_TX 0x2000 /* flow control */ +#define YU_GPSR_LINK 0x1000 /* link status (down/up) */ +#define YU_GPSR_PAUSE 0x0800 /* flow control enable/disable */ +#define YU_GPSR_TX_IN_PROG 0x0400 /* transmit in progress */ +#define YU_GPSR_EXCESS_COL 0x0200 /* excessive collisions occurred */ +#define YU_GPSR_LATE_COL 0x0100 /* late collision occurred */ +#define YU_GPSR_MII_PHY_STC 0x0020 /* MII PHY status change */ +#define YU_GPSR_GIG_SPEED 0x0010 /* Gigabit Speed (0 - use speed bit) */ +#define YU_GPSR_PARTITION 0x0008 /* partition mode */ +#define YU_GPSR_FCTL_RX 0x0004 /* flow control enable/disable */ +#define YU_GPSR_PROMS_EN 0x0002 /* promiscuous mode enable/disable */ + +/* General Purpose Control Register (GPCR) */ +#define YUKON_GPCR 0x0004 + +#define YU_GPCR_FCTL_TX 0x2000 /* Transmit flow control 802.3x */ +#define YU_GPCR_TXEN 0x1000 /* Transmit Enable */ +#define YU_GPCR_RXEN 0x0800 /* Receive Enable */ +#define YU_GPCR_LPBK 0x0200 /* Loopback Enable */ +#define YU_GPCR_PAR 0x0100 /* Partition Enable */ +#define YU_GPCR_GIG 0x0080 /* Gigabit Speed */ +#define YU_GPCR_FLP 0x0040 /* Force Link Pass */ +#define YU_GPCR_DUPLEX 0x0020 /* Duplex Enable */ +#define YU_GPCR_FCTL_RX 0x0010 /* Receive flow control 802.3x */ +#define YU_GPCR_SPEED 0x0008 /* Port Speed */ +#define YU_GPCR_DPLX_EN 0x0004 /* Enable Auto-Update for duplex */ +#define YU_GPCR_FCTL_EN 0x0002 /* Enabel Auto-Update for 802.3x */ +#define YU_GPCR_SPEED_EN 0x0001 /* Enable Auto-Update for speed */ + +/* Transmit Control Register (TCR) */ +#define YUKON_TCR 0x0008 + +#define YU_TCR_FJ 0x8000 /* force jam / flow control */ +#define YU_TCR_CRCD 0x4000 /* insert CRC (0 - enable) */ +#define YU_TCR_PADD 0x2000 /* pad packets to 64b (0 - enable) */ +#define YU_TCR_COLTH 0x1c00 /* collision threshold */ + +/* Receive Control Register (RCR) */ +#define YUKON_RCR 0x000c + +#define YU_RCR_UFLEN 0x8000 /* unicast filter enable */ +#define YU_RCR_MUFLEN 0x4000 /* multicast filter enable */ +#define YU_RCR_CRCR 0x2000 /* remove CRC */ +#define YU_RCR_PASSFC 0x1000 /* pass flow control packets */ + +/* Transmit Flow Control Register (TFCR) */ +#define YUKON_TFCR 0x0010 /* Pause Time */ + +/* Transmit Parameter Register (TPR) */ +#define YUKON_TPR 0x0014 + +#define YU_TPR_JAM_LEN(x) (((x) & 0x3) << 14) +#define YU_TPR_JAM_IPG(x) (((x) & 0x1f) << 9) +#define YU_TPR_JAM2DATA_IPG(x) (((x) & 0x1f) << 4) + +/* Serial Mode Register (SMR) */ +#define YUKON_SMR 0x0018 + +#define YU_SMR_DATA_BLIND(x) (((x) & 0x1f) << 11) +#define YU_SMR_LIMIT4 0x0400 /* reset after 16 / 4 collisions */ +#define YU_SMR_MFL_JUMBO 0x0100 /* max frame length for jumbo frames */ +#define YU_SMR_MFL_VLAN 0x0200 /* max frame length + vlan tag */ +#define YU_SMR_IPG_DATA(x) ((x) & 0x1f) + +/* Source Address Low #1 (SAL1) */ +#define YUKON_SAL1 0x001c /* SA1[15:0] */ + +/* Source Address Middle #1 (SAM1) */ +#define YUKON_SAM1 0x0020 /* SA1[31:16] */ + +/* Source Address High #1 (SAH1) */ +#define YUKON_SAH1 0x0024 /* SA1[47:32] */ + +/* Source Address Low #2 (SAL2) */ +#define YUKON_SAL2 0x0028 /* SA2[15:0] */ + +/* Source Address Middle #2 (SAM2) */ +#define YUKON_SAM2 0x002c /* SA2[31:16] */ + +/* Source Address High #2 (SAH2) */ +#define YUKON_SAH2 0x0030 /* SA2[47:32] */ + +/* Multicatst Address Hash Register 1 (MCAH1) */ +#define YUKON_MCAH1 0x0034 + +/* Multicatst Address Hash Register 2 (MCAH2) */ +#define YUKON_MCAH2 0x0038 + +/* Multicatst Address Hash Register 3 (MCAH3) */ +#define YUKON_MCAH3 0x003c + +/* Multicatst Address Hash Register 4 (MCAH4) */ +#define YUKON_MCAH4 0x0040 + +/* Transmit Interrupt Register (TIR) */ +#define YUKON_TIR 0x0044 + +#define YU_TIR_OUT_UNICAST 0x0001 /* Num Unicast Packets Transmitted */ +#define YU_TIR_OUT_BROADCAST 0x0002 /* Num Broadcast Packets Transmitted */ +#define YU_TIR_OUT_PAUSE 0x0004 /* Num Pause Packets Transmitted */ +#define YU_TIR_OUT_MULTICAST 0x0008 /* Num Multicast Packets Transmitted */ +#define YU_TIR_OUT_OCTETS 0x0030 /* Num Bytes Transmitted */ +#define YU_TIR_OUT_64_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_127_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_255_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_511_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_1023_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_1518_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_MAX_OCTETS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_SPARE 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_COLLISIONS 0x0000 /* Num Packets Transmitted */ +#define YU_TIR_OUT_LATE 0x0000 /* Num Packets Transmitted */ + +/* Receive Interrupt Register (RIR) */ +#define YUKON_RIR 0x0048 + +/* Transmit and Receive Interrupt Register (TRIR) */ +#define YUKON_TRIR 0x004c + +/* Transmit Interrupt Mask Register (TIMR) */ +#define YUKON_TIMR 0x0050 + +/* Receive Interrupt Mask Register (RIMR) */ +#define YUKON_RIMR 0x0054 + +/* Transmit and Receive Interrupt Mask Register (TRIMR) */ +#define YUKON_TRIMR 0x0058 + +/* SMI Control Register (SMICR) */ +#define YUKON_SMICR 0x0080 + +#define YU_SMICR_PHYAD(x) (((x) & 0x1f) << 11) +#define YU_SMICR_REGAD(x) (((x) & 0x1f) << 6) +#define YU_SMICR_OPCODE 0x0020 /* opcode (0 - write, 1 - read) */ +#define YU_SMICR_OP_READ 0x0020 /* opcode read */ +#define YU_SMICR_OP_WRITE 0x0000 /* opcode write */ +#define YU_SMICR_READ_VALID 0x0010 /* read valid */ +#define YU_SMICR_BUSY 0x0008 /* busy (writing) */ + +/* SMI Data Register (SMIDR) */ +#define YUKON_SMIDR 0x0084 + +/* PHY Addres Register (PAR) */ +#define YUKON_PAR 0x0088 + +#define YU_PAR_MIB_CLR 0x0020 /* MIB Counters Clear Mode */ +#define YU_PAR_LOAD_TSTCNT 0x0010 /* Load count 0xfffffff0 into cntr */ --ZGiS0Q5IWpPtfppv--