Date: Fri, 08 Apr 2022 13:38:43 +0000 From: widelec-bb <widelecbb@protonmail.com> To: Al <al@datazap.net> Cc: "freebsd-ppc@FreeBSD.org" <freebsd-ppc@FreeBSD.org> Subject: Re: Booting FreeBSD 13-RELEASE on AmigaOne X5000 (Cyrus P5020) Message-ID: <T2QMV8YM4iMH3Wv5P0RGYI8B9DzlUnBurav3KUKt5bx8iU85aqGzqfp6yKzcYVDCR418h-kSubyV1VQdQSRHI5qisFB3Z_bRQthBTY0bPxI=@protonmail.com> In-Reply-To: <82dd03be-dfd3-8d7b-0502-8c192e81e13e@datazap.net> References: <j0NfHu-q2mv320H_z3O1P7TjZzbUthnZ43U1fQfkvz_YmAjH8D01G9Sf27POtt7MNfPWTIKAZuEL10H9Legs7xbhLbrsizr89MXpAvaMPLk=@protonmail.com> <82dd03be-dfd3-8d7b-0502-8c192e81e13e@datazap.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> You need to add: > > setenv loaderdev disk0s2a > > Also, maybe: > > setenv bootargs vfs.root.mountfrom=3Dufs:/dev/ada1s2a > > Of course, you will need to change the device to match yours. Unfortunately this hasn't change anything. Ubldr still can't find kernel. Log from console: X5000> setenv loaderdev disk2s4a X5000> setenv bootargs vfs.root.mountfrom=3Dufs:/dev/ada1s4a X5000> run bootfreebsd reading ubldr 315292 bytes read in 24 ms (12.5 MiB/s) reading bsd_cyrus_p5020.dtb 65536 bytes read in 41 ms (1.5 MiB/s) ## Starting application at 0x00010160 ... Consoles: U-Boot console Compatible U-Boot API signature found @0x7fe2efd8 FreeBSD/powerpc64 U-Boot loader, Revision 1.1 Number of U-Boot devices: 4 U-Boot env: loaderdev=3D'disk2s4a' Found U-Boot device: disk Checking unit=3D2 slice=3D4 partition=3D0... good. Booting from disk2s4a: / can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help. loader> show LINES=3D24 console=3Duboot currdev=3Ddisk2s4a: interpret=3DOK loaddev=3Ddisk2s4a: prompt=3Dloader> script.lang=3Dforth twiddle_divisor=3D1 usefdt=3D1 loader> To be sure I set it properly I tried also setting loaderdev with colon at end of device name, result was exactly the same, so I did not insert full log of that attempt into this message. > Also, you may need a newer .dtb. I can email you one if you need it. That would be very nice, I will gladly try it. - widelec-BB
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?T2QMV8YM4iMH3Wv5P0RGYI8B9DzlUnBurav3KUKt5bx8iU85aqGzqfp6yKzcYVDCR418h-kSubyV1VQdQSRHI5qisFB3Z_bRQthBTY0bPxI=>