Date: Sun, 29 May 2005 03:08:38 +0200 From: Ulf Magnusson <ulfma629@student.liu.se> To: Vizion <vizion@vizion.occoxmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Seagate HD not detected by FreeBSD Message-ID: <ae705b0e31.b0e31ae705@liu.se>
next in thread | raw e-mail | index | archive | help
From: Vizion <vizion@vizion.occoxmail.com>
> On Saturday 28 May 2005 16:48, the author Ulf Magnusson
> contributed to the
> dialogue on Seagate HD not detected by FreeBSD:
> >I'm trying to add a 120 GiB Seagate Barracuda (ST3120022A) HD. I've
> >attached it as the sole device on IDE cable 2, jumpering it as a
> slave>device. It is correctly detected by the BIOS as the Secondary
> Slave.>
> >The drive isn't detected by FreeBSD. There's no entry for it among
> the>dmesg messages, and no device node gets created. I've tried
> disabling>UDMA on the drive, to no avail.
> >
> >
> >System info:
> >
> >Epox Nforce2 motherboard
> >FreeBSD obygden 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed May 11
> 17:32:06>CEST 2005 ulf@obygden:/usr/obj/usr/src/sys/DEB i386
> >
> >
> >Parts of dmesg output:
> >
> >atapci0: <nVidia nForce2 UDMA133 controller> port
> >0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on
> pci0>ata0: channel #0 on atapci0
> >ata1: channel #1 on atapci0
> >...
> >ad0: 38166MB <ST340014A/8.01> [77545/16/63] at ata0-master UDMA100
> >Mounting root from ufs:/dev/ad0s1a
> ><End of dmesg output>
> >
> Can you please attach the full output from dmesg
>
> daid
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Wed May 11 17:32:06 CEST 2005
ulf@obygden:/usr/obj/usr/src/sys/DEB
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) processor (1403.19-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511438848 (487 MB)
mptable_probe: MP Config Table has bad signature:
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe1ffffff at
device 0.0 on
pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe4001000-0xe4001fff irq 22
at devic
e 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe4004000-0xe4004fff irq 21
at devic
e 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem
0xe3000000-0xe300
007f irq 16 at device 8.0 on pci1
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:1c:4b:d1
pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 18 at device 10.0 on pci1
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
atapci0: <nVidia nForce2 UDMA133 controller> port
0xf000-0xf00f,0x376,0x170-0x17
7,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvidia0: <GeForce3> mem
0xdc000000-0xdc07ffff,0xd8000000-0xdbffffff,0xd0000000-0
xd0ffffff irq 19 at device 0.0 on pci2
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq
7 on acp
i0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcc7ff,0xc0000-0xcb7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
Timecounter "TSC" frequency 1403190916 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38166MB <ST340014A/8.01> [77545/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ae705b0e31.b0e31ae705>