Date: 18 Dec 2002 23:13:22 +0100 From: Ralf-Philipp Weinmann <ralf@fimaluka.org> To: freebsd-hackers@freebsd.org Subject: fxp faults in FreeBSD-5.0RC1 Message-ID: <1040249606.1767.19.camel@bender.fimaluka.org>
next in thread | raw e-mail | index | archive | help
Hi,
I just gave FreeBSD 5.0RC1 a spin on my new notebook, a Samsung P10 XTC
(very similar to the MicronPC Transport T1000 sold in the US) and got
bitten by a bug in the fxp driver which landed my in ddb land when
trying to download and install ports:
> Fatal trap 18: integer divide fault while in kernel mode
> instruction pointer = 0x8:0xc024db35
> stack pointer = 0x10:0xd67dacc0
> frame pointer = 0x10:0xd67dace0
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, IOPL = 0
> current process = 23 (irq11: cbb0 fxp0++)
Doing a trace in ddb yield the following:
> db> trace
> cbb_intr(c1518a00,0,c04ca046,216,c406d760) at cbb_intr+0x45
> ithread_loop(c4051d00,d67dad48,c04c9ebb,35a,0) at ithread_loop+0x182
> fork_exit(c02da650,c4051d00,d67dad48) at fork_exit+0xa5
> fork_trampoline() at fork_trampoline+0x1a
> --- trap 0x1, eip = 0, esp = 0xd67dad7c, ebp = 0 ---
> db> fxp0: device timeout
I'm also kind of confused why it's faulting in cbb_intr. Looking at the
bus topology the NIC should be hanging off the PCI bridge and not off
the CardBus bridge <shrug>.
Before writing this mail, I had a look at the CVS repository but was not
able to find any new checkins for the fxp driver and the CardBus stuff
(after the RC1 release). FreeBSD-4.7 seems to run fine on the machine,
though I only did rather superficial testing.
Can anyone help me with this one? I've also had a high success rate
reproducing this failure by ping -f'ing my machine.
Attached you find the dmesg as well as output from pciconf -l and
devinfo -r. The kernel is the default one included on the 5.0-RC1 i386
ISOs.
Cheers,
Ralf
<------------------- SNIP -------------------->
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC1 #0: Sat Dec 7 22:16:29 GMT 2002
root@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06b50a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1196124752 Hz
CPU: Pentium 4 (1196.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xffffffffbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>>
real memory = 267845632 (255 MB)
avail memory = 252985344 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD Sheeks > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI-1287: *** Error: Method execution failed,
AE_AML_UNINITIALIZED_LOCAL
Using $PIR table, 8 entries at 0xc00fdf40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
acpi_acad0: <AC adapter> on acpi0
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
ACPI-1287: *** Error: Method execution failed,
AE_AML_NO_RETURN_VALUE
acpi_cmbat0: <Control method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0x1820-0x183f irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <RF5C475 PCI-CardBus Bridge> at device 3.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 3 INTA is routed to irq 11
pci2: <serial bus, FireWire> at device 3.1 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem
0xe8200000-0xe8200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:00:f0:76:12:70
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xdc000-0xdffff,0xd8000-0xdbfff,0xd0000-0xd3fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
cbb0: Unsupported card type detected
system power profile changed to 'economy'
ad0: 28615MB <FUJITSU MHR2030AT> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <Samsung CD-RW/DVD-ROM SN-308B> at ata1-master PIO4
MBREXT Slice 5 on ad0s2:
0000 00 01 81 7e 82 fe ff 01 3f 00 00 00 45 5b 20 00 |...~....?...E[
.|
[0] f:00 typ:130 s(CHS):126/1/129 e(CHS):1/254/255 s:63 l:2120517
0000 00 00 c1 02 05 fe ff ff 84 5b 20 00 fe 64 9c 00 |.........[
..d..|
[1] f:00 typ:5 s(CHS):2/0/193 e(CHS):255/254/255 s:2120580 l:10249470
MBREXT Slice 6 on ad0s2:
0000 00 01 c1 02 83 fe ff ff 3f 00 00 00 bf 64 9c 00
|........?....d..|
[0] f:00 typ:131 s(CHS):2/1/193 e(CHS):255/254/255 s:63 l:10249407
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s3a
system power profile changed to 'performance'
<------------------- SNAP -------------------->
<------------------- SNIP -------------------->
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04
hdr=0x01
vendor = 'Intel Corporation'
device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x19588086 chip=0x24828086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x19588086 chip=0x24848086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x19588086 chip=0x24878086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #3'
class = serial bus
subclass = USB
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42
hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM Hub Interface to PCI Bridge (Camino 2)'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM LPC Interface or ISA bridge: see Notes'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x19588086 chip=0x248a8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
none0@pci0:31:3: class=0x0c0500 card=0x19588086 chip=0x24838086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
class = serial bus
subclass = SMBus
none1@pci0:31:5: class=0x040100 card=0xc006144d chip=0x24858086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller'
class = multimedia
subclass = audio
none2@pci0:31:6: class=0x070300 card=0x2115144d chip=0x24868086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
class = simple comms
none3@pci1:0:0: class=0x030000 card=0xc006144d chip=0x4c571002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies'
device = 'Radeon Mobility M6 LW'
class = display
subclass = VGA
cbb0@pci2:3:0: class=0x060700 card=0xc006144d chip=0x04751180 rev=0xb8
hdr=0x02
vendor = 'Communication Automation Corporation'
device = 'RL5C475 CardBus controller'
class = bridge
subclass = PCI-CardBus
none4@pci2:3:1: class=0x0c0010 card=0xc006144d chip=0x05511180 rev=0x00
hdr=0x00
vendor = 'Communication Automation Corporation'
device = 'IEEE1394 Controller'
class = serial bus
subclass = FireWire
fxp0@pci2:8:0: class=0x020000 card=0xc006144d chip=0x10318086 rev=0x42
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection'
class = network
subclass = ethernet
<------------------- SNAP -------------------->
<------------------- SNIP -------------------->
nexus0
npx0
acpi0
Interrupt request lines:
9
acpi_timer0
I/O ports:
0x1008-0x100b
acpi_cpu0
acpi_tz0
acpi_acad0
acpi_cmbat0
acpi_button0
acpi_lid0
acpi_button1
pcib0
pci0
agp0
I/O memory addresses:
0xec000000-0xefffffff
pcib1
pci1
uhci0
Interrupt request lines:
11
I/O ports:
0x1800-0x181f
usb0
uhub0
uhci1
Interrupt request lines:
10
I/O ports:
0x1820-0x183f
usb1
uhub1
uhci2
I/O ports:
0x1840-0x185f
usb2
uhub2
pcib2
pci2
cbb0
I/O memory addresses:
0xe8200000-0xe8200fff
cardbus0
pccard0
fxp0
I/O ports:
0x4000-0x403f
miibus0
inphy0
isab0
isa0
sc0
sio0
Interrupt request lines:
4
I/O ports:
0x3f8-0x3ff
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
orm0
I/O memory addresses:
0xc0000-0xcffff
0xd0000-0xd3fff
0xd8000-0xdbfff
0xdc000-0xdffff
pmtimer0
atapci0
ata0
Interrupt request lines:
14
I/O ports:
0x1f0-0x1f7
0x3f6
0x1860-0x1867
ata1
Interrupt request lines:
15
I/O ports:
0x170-0x177
0x376
0x1868-0x186f
attimer0
atpic0
attimer1
npxisa0
atdma0
acpi_sysresource0
I/O ports:
0x2e-0x2f
0x61
0x63
0x65
0x67
0x80
0x92
0x580-0x587
0x600-0x60f
0x700-0x70f
0x100c-0x108b
0x1180-0x11bf
0xfe00
I/O memory addresses:
0xfebffc00-0xfebfffff
0xfed00000-0xfed03fff
acpi_ec0
I/O ports:
0x62
0x66
fdc0
Interrupt request lines:
6
DMA request lines:
2
I/O ports:
0x3f0-0x3f5
0x3f7
ppc0
Interrupt request lines:
7
DMA request lines:
1
I/O ports:
0x378-0x37f
ppbus0
plip0
lpt0
ppi0
atkbdc0
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
psm0
Interrupt request lines:
12
psmcpnp0
<------------------- SNAP -------------------->
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1040249606.1767.19.camel>