Date: Mon, 17 Sep 2001 08:13:32 -0500 From: Robert Small <robert@luftx.net> To: freebsd-stable@freebsd.org Subject: dc0: watchdog timeout Message-ID: <3BA5F6FC.F381989A@luftx.net>
next in thread | raw e-mail | index | archive | help
I did a build/installworld on Saturday:
FreeBSD blackhole.luftx.net 4.4-STABLE FreeBSD 4.4-STABLE #16: Sat Sep
15 12:16:39 CDT 2000
Built/installed a new kernel (and ran mergemaster), and since then I
keep getting:
dc0: watchdog timeout
Any ideas? This didn't appear till after the system was rebooted.
Any ideas?
Robert
dmesg:
FreeBSD 4.4-STABLE #16: Sat Sep 15 12:16:39 CDT 2001
robert@blackhole.luftx.net:/usr/obj/usr/src/sys/BLACKHOLE
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257323008 (251292K bytes)
Preloaded elf kernel "kernel" at 0xc03ec000.
Preloaded elf module "miibus.ko" at 0xc03ec09c.
Preloaded elf module "snd_csa.ko" at 0xc03ec13c.
Preloaded elf module "snd_pcm.ko" at 0xc03ec1dc.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc034b722 (1000022)
VESA: NVidia
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdf10
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xd000-0xd00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec 2940 SCSI adapter> port 0xd800-0xd8ff mem
0xeb000000-0xeb000fff irq 11 at device 8.0 on
pci0
aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs
pcm0: <Creative CT5880-A> port 0xdc00-0xdc3f irq 5 at device 9.0 on pci0
pci0: <unknown card> (vendor=0x11ad, dev=0x0002) at 10.0 irq 9
pci0: <unknown card> (vendor=0x10b7, dev=0x9055) at 11.0 irq 9
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd27ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata1-master using PIO4
Waiting 8 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <SONY SDT-5000 3.30> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Mounting root from ufs:/dev/ad0s2a
dc0: <82c169 PNIC 10/100BaseTX> port 0xe000-0xe0ff mem
0xeb002000-0xeb0020ff irq 9 at device 10.0 on pci0
dc0: Ethernet address: 00:a0:cc:60:0e:f6
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem
0xeb001000-0xeb00107f irq 9 at device 11
.0 on pci0
xl0: Ethernet address: 00:10:4b:67:c7:4e
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BA5F6FC.F381989A>