Date: Mon, 30 Mar 2015 10:16:26 -0500 From: Jedi Tek'Unum <jeditekunum@gmail.com> To: freebsd-arm@freebsd.org Subject: Re: Pogoplug V4 88F6192 TCLK problem Message-ID: <1C6A9896-3A3C-413A-97E9-99C9AE83B3DF@gmail.com>
next in thread | raw e-mail | index | archive | help
My first time making changes to freebsd so I=92m a noob about standards = and procedures. I have a working kludge at = https://github.com/freebsd/freebsd/commit/01da3228908bfc2171daaa495ccfb043= 0ed60fb3 Would it be better to figure out how to submit a change request or = submit a bug/enhancement request? dmesg FYI: KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE+pogoplugv4 #5: Mon Mar 30 09:34:41 CDT 2015 root@freebsd:/usr/obj/arm.arm/usr/src/sys/POGOPLUGV4 arm FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Feroceon 88FR131 rev 1 (Marvell core) Little-endian DC enabled IC enabled WA disabled DC streaming enabled BTB disabled L2 enabled L2 prefetch enabled WB enabled EABT branch prediction enabled 16KB/32B 4-way instruction cache 16KB/32B 4-way write-back-locking-C data cache real memory =3D 134213632 (127 MB) avail memory =3D 122646528 (116 MB) SOC: Marvell 88F6192 rev A1, TClock 166MHz Instruction cache prefetch disabled, data cache prefetch disabled 256KB 4-way set-associative write-through unified L2 cache random: <Software, Yarrow> initialized ofwbus0: <Open Firmware Device Tree> localbus0: <Marvell device bus> on ofwbus0 simplebus0: <Flattened device tree simple bus> on ofwbus0 ic0: <Marvell Integrated Interrupt Controller> mem 0x20200-0x2023b on = simplebus0 timer0: <Marvell CPU Timer> mem 0x20300-0x2032f irq 1 on simplebus0 Event timer "CPUTimer0" frequency 166666667 Hz quality 1000 Timecounter "CPUTimer1" frequency 166666667 Hz quality 1000 gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq = 35,36,37,38,39,40,41 on simplebus0 rtc0: <Marvell Integrated RTC> mem 0x10300-0x10307 on simplebus0 twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq = 43 on simplebus0 iicbus0: <Philips I2C bus> on twsi0 iic0: <I2C generic I/O> on iicbus0 mge0: <Marvell Gigabit Ethernet controller> mem 0x72000-0x73fff irq = 12,13,14,11,46 on simplebus0 mge0: Ethernet address: 00:25:31:05:ec:9c miibus0: <MII bus> on mge0 e1000phy0: <Marvell 88E1116R Gigabit PHY> PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto uart0: <16550 or compatible> mem 0x12000-0x1201f irq 33 on simplebus0 uart0: console (1280,n,8,1) uart1: <16550 or compatible> mem 0x12100-0x1211f irq 34 on simplebus0 cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem = 0x30000-0x3ffff irq 22 on simplebus0 cesa0: not powered on device_attach: cesa0 attach returned 6 ehci0: <Marvell Integrated USB 2.0 controller> mem 0x50000-0x50fff irq = 48,19 on simplebus0 usbus0: EHCI version 1.0 usbus0: set host controller mode usbus0 on ehci0 pcib0: <Marvell Integrated PCI/PCI-E Controller> mem = 0xf1040000-0xf1041fff irq 44 on ofwbus0 pci0: <PCI bus> on pcib0 xhci0: <XHCI (generic) USB 3.0 controller> mem = 0xf1300000-0xf130ffff,0xf1310000-0xf1310fff,0xf1311000-0xf1311fff at = device 1.0 on pci0 xhci0: 32 byte context size. usbus1 on xhci0 cryptosoft0: <software crypto> Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to = accept, logging disabled DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded usbus0: 480Mbps High Speed USB v2.0 usbus1: 5.0Gbps Super Speed USB v3.0 ugen0.1: <Marvell> at usbus0 uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus0 ugen1.1: <0x1b73> at usbus1 uhub1: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus1 random: unblocking device. uhub1: 4 ports with 4 removable, self powered uhub0: 1 port with 1 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: <vendor 0x0bda> at usbus1 urtwn0: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 1> = on usbus1 urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R Root mount waiting for: usbus0 ugen0.2: <SanDisk> at usbus0 umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.27, addr 2> on usbus0 Trying to mount root from ufs:/dev/ufs/kirkwoodroot []... mountroot: waiting for device /dev/ufs/kirkwoodroot ... da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <SanDisk Cruzer Fit 1.27> Removable Direct Access SCSI-6 device=20 da0: Serial Number 4C530012241231105045 da0: 40.000MB/s transfers da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C) da0: quirks=3D0x2<NO_6_BYTE>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1C6A9896-3A3C-413A-97E9-99C9AE83B3DF>