Date: Thu, 22 Jun 2000 08:45:53 -0500 (CDT) From: keith@orbis.net To: freebsd-questions@freebsd.org Subject: Audio, Dell Precision 220, Freebsd 4.0?? Message-ID: <200006221345.IAA22553@osiris2.2ndAve.mpls.orbis.net>
next in thread | raw e-mail | index | archive | help
(Please copy keith@orbis.net on any response)
I am trying to get audio working on a Dell Precision 220 with an
Analog Devices AD1881. I am using FreeBSD 4.0-RELEASE and have
tried configuring the kernel with both pnp sound support and the old
snd0 support. Suggestions? Below is my dmesg output (pnp config):
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-RELEASE #7: Tue Jun 20 09:09:11 EDT 2000
keith@champagne.bizbash.com:/usr/src/sys/compile/CHAMPAGNE_0
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (662.22-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 133816320 (130680K bytes)
avail memory = 125603840 (122660K bytes)
Preloaded elf kernel "kernel" at 0xc03fd000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 9
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x1102, dev=0x0002) at 7.0 irq 9
pci2: <unknown card> (vendor=0x1102, dev=0x7002) at 7.1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem
0xfafffc00-0xfafffc7f irq 5 at device 12.0 on pci2
xl0: Ethernet address: 00:b0:d0:23:87:65
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: supplying EUI64: 00:b0:d0:ff:fe:23:87:65
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
pca0 at port 0x40 on isa0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown0: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown: <PNP0000> can't assign resources
unknown1: <PNP0003> at iomem 0xfee00000-0xfee0ffff,0xfec00000-0xfec0ffff
on isa0
unknown2: <PNP0100> at port 0x40-0x5f irq 0 on isa0
unknown3: <PNP0200> at port 0x80-0x9f,0-0x1f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0800> can't assign resources
unknown4: <INT0800> at iomem 0xffb00000-0xffbfffff on isa0
unknown5: <PNP0b00> at port 0x70-0x7f irq 8 on isa0
unknown6: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown7: <PNP0c02> at iomem 0x7f9e000-0x7ffffff on isa0
ad0: 19470MB <WDC WD204BA> [39560/16/63] at ata0-master using UDMA66
acd0: CDROM <Lite-On LTN483S 48x Max> at ata1-master using PIO4
afd0: 239MB <IOMEGA ZIP 250 ATAPI> [239/64/32] at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
xl0: starting DAD for fe80:0001::02b0:d0ff:fe23:8765
xl0: DAD complete for fe80:0001::02b0:d0ff:fe23:8765 - no duplicates
found
-keit
--
Keith A. Fredericks
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006221345.IAA22553>