Date: Thu, 23 Mar 2000 14:24:33 -0600 From: "Travis Leuthauser" <travis@winconx.com> To: <freebsd-questions@freebsd.org> Subject: Re: OnBoard Sound Message-ID: <006f01bf9505$cd577820$20503cd0@travis> References: <05ea01bf9391$28389100$20503cd0@travis>
next in thread | previous in thread | raw e-mail | index | archive | help
I know it's bad form to reply to my own message, but the sound chipset is a
cmi8330. I searched the archives and found a few posts questioning
problems, but no responses with a solution.
Thanks again,
Travis Leuthauser
----- Original Message -----
From: "Travis Leuthauser" <travis@winconx.com>
To: <freebsd-questions@freebsd.org>
Sent: Tuesday, March 21, 2000 5:57 PM
Subject: OnBoard Sound
> I am running FreeBSD 3.4-RELEASE on an AMD K6 300. I am using a Matsonic
> 5025S with OnBoard sound. I am having problems getting the sound working
> properly. Throughout playing, I can hear the sound, but it's very jumpy.
> I'm relatively new to setting up sound. Any suggestions would be greatly
> appreciated.
>
> Thanks,
> Travis Leuthauser
>
> Exact Errors:
> These errors come up as soon as I execute the play command
> server# play test.wav
> Mar 21 17:51:11 server /kernel: dsp stereo: 2 is invalid, assuming 1
> Mar 21 17:51:11 server /kernel: dsp stereo: 2 is invalid, assuming 1
>
> These errors come up just as the wav file finishes playing
> Mar 21 17:51:47 server /kernel: timeout flushing dbuf_out, chan 3 cnt
> 0xfffd6dc0 flags 0x00000141
> Mar 21 17:51:47 server /kernel: timeout flushing dbuf_out, chan 3 cnt
> 0xfffd6dc0 flags 0x00000141
>
> relevant line from /boot/kernel.conf
> pnp 1 0 os enable port0 0x530 irq0 10 drq0 3
>
> relevant lines from kernel config
> device pcm0 at isa? port 0x530 tty irq 10 drq 3 flags 0x15
>
> dmesg output:
> pcm0 at 0x530 irq 10 drq 3 flags 0x9115 on isa
> mss_attach <mss>0 at 0x530 irq 10 dma 3:5 flags 0x9115
>
> pnpinfo output:
> Checking for Plug-n-Play devices...
>
> Card assigned CSN #1
> Vendor ID CMI0001 (0x0100a90d), Serial Number 0x01000100
> PnP Version 1.0, Vendor Version 0
> Device Description: CMI8330. Audio Adapter
>
> Logical Device ID: @@@0001 0x01000000 #0
> TAG Start DF
> Good Configuration
> I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8
> [16-bit addr]
> IRQ: 11 - only one type (true/edge)
> DMA: channel(s) 0
> 8-bit, not a bus master, count by byte, , Compatibility mode
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> TAG Start DF
> Acceptable Configuration
> I/O Range 0xe80 .. 0xf40, alignment 0xc0, len 0x8
> [16-bit addr]
> I/O Range 0x388 .. 0x3f8, alignment 0x10, len 0x8
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> TAG End DF
>
> Logical Device ID: @H@0001 0x01000001 #1
> TAG Start DF
> Good Configuration
> I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
> [16-bit addr]
> IRQ: 9 - only one type (true/edge)
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> server# pnpinfo | more
> Checking for Plug-n-Play devices...
>
> Card assigned CSN #1
> Vendor ID CMI0001 (0x0100a90d), Serial Number 0x01000100
> PnP Version 1.0, Vendor Version 0
> Device Description: CMI8330. Audio Adapter
>
> Logical Device ID: @@@0001 0x01000000 #0
> TAG Start DF
> Good Configuration
> I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8
> [16-bit addr]
> IRQ: 11 - only one type (true/edge)
> DMA: channel(s) 0
> 8-bit, not a bus master, count by byte, , Compatibility mode
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> TAG Start DF
> Acceptable Configuration
> I/O Range 0xe80 .. 0xf40, alignment 0xc0, len 0x8
> [16-bit addr]
> I/O Range 0x388 .. 0x3f8, alignment 0x10, len 0x8
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> TAG End DF
>
> Logical Device ID: @H@0001 0x01000001 #1
> TAG Start DF
> Good Configuration
> I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
> [16-bit addr]
> IRQ: 9 - only one type (true/edge)
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> TAG End DF
>
> Logical Device ID: @P@0001 0x01000002 #2
> TAG Start DF
> Good Configuration
> I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x200 .. 0xfe0, alignment 0x10, len 0x8
> [16-bit addr]
> TAG End DF
>
> Logical Device ID: @X@0001 0x01000003 #3
> TAG Start DF
> Good Configuration
> I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
> [16-bit addr]
> IRQ: 5 - only one type (true/edge)
> DMA: channel(s) 1
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5
> 16-bit, not a bus master, , count by word, Compatibility mode
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
> [16-bit addr]
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5 7
> 16-bit, not a bus master, , count by word, Compatibility mode
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5 7
> 16-bit, not a bus master, , count by word, Compatibility mode
> TAG End DF
> End Tag
>
> Successfully got 50 resources, 4 logical fdevs
> -- card select # 0x0001
>
> CSN CMI0001 (0x0100a90d), Serial Number 0x01000100
>
> Logical device #0
> IO: 0x0530 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 10 0
> DMA 3 0
> IO range check 0x00 activate 0x01
>
> Logical device #1
> IO: 0x0330 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 9 0
> DMA 0 0
> IO range check 0x00 activate 0x01
>
> Logical device #2
> IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 0 0
> DMA 0 0
> IO range check 0x00 activate 0x01
>
> Logical device #3
> IO: 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 5 0
> DMA 1 5
> IO range check 0x00 activate 0x01
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006f01bf9505$cd577820$20503cd0>